Time-Delay Ferrule Fuse FNM
13/32” x 1-1/2”
Form No. FNM
Page 1 of 2
Data Sheet: 2028
Bussmann®
7-23-03 N03095
Carton Quantity and Weight
Ampere Carton Weight
Ratings Qty Lbs. Kg.
0-30 10 .125 .057
FNM-12
FNM-15
Ð
Ð
32Vac
FNM-20
FNM-25
FNM-30
-
Ð
Ð
Ð
-
Electrical Ratings (Catalog Symbol and Amperes)
250Vac IR 250Vac IR 250Vac IR 125Vac
1.5"
(50.031)
(38.1mm)
.41"
(50.004)
(10.3mm)
Catalog Symbol: FNM
TIME-DELAY
1/10 TO 30A
Interrupting Rating - SEE CHART BELOW
UL Listed: STD. 248-14, 0-10/250Vac; 12-15/125Vac
FILE #E19180, GUIDE #JDYX
CSA Certified: 1-10/250Vac; CLASS 1422-01,
12-15/125Vac; FILE 53787
FNM-1/10
FNM-1/8
FNM-15/100
FNM-2/10
FNM-1/4
FNM-3/10
FNM-4/10
FNM-1/2
FNM-6/10
FNM-3/4
FNM-8/10
FNM-1
Ð
FNM-1-1/8
FNM-1-1/4
FNM-1-4/10
FNM-1-1/2
FNM-1-6/10
FNM-1-8/10
FNM-2
FNM-2-1/4
FNM-2-1/2
FNM-2-8/10
FNM-3
FNM-3-2/10
FNM-3-1/2
FNM-4
FNM-4-1/2
FNM-5
FNM-5-6/10
FNM-6
FNM-6-1/4
FNM-7
FNM-8
FNM-9
FNM-10
Ð
Ð
Ð
35A @
250Vac
10,000
@
125Vac
100A @
250Vac
10,000
@
125Vac
200A @
250Vac
10,000 @
125Vac
10,000
@ 125Vac
¥ Fibre tube.
¥ For circuits with high inrush currents.
¥ Formerly designated 5AB.
¥ Fusetron¨Dual-Element fuse.
If 250Vac is needed for 12-30A, use FNW series.
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact
Bussmann Application Engineering at 636-527-1270 for more information.
Recommended fuseblocks/fuseholders for
13/32” x 1-1/2” fuses
See Data Sheets listed below
• Open fuseblocks - 1104, 2104
• Finger-safe fuseholders - 1109, 1102, 1103, 1151
• Panel-mount fuseholders - 2114, 2113, 2108,
2112, 2109, 2140
• In-line fuseholders - 2127, 2126
Time-Delay Ferrule Fuse FNM
13/32” x 1-1/2”
Bussmann®
Form No. FNM
Page 2 of 2
Data Sheet: 2028
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this Data Sheet are by definition uncontrolled. This bulletin is intended to clearly
present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products
and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it
should be tested by the user in all possible applications.
Time-Current Characteristic Curves–Average Melt
7-23-03 N03095
