MICRO SWITCHTM Compact Precision Limit Switches 914CE Series Datasheet MICRO SWITCHTM 914CE Series Compact Precision Limit Switches All MICRO SWITCHTM 914CE Series compact enclosed switches incorporate fluorocarbon diaphragm sealing to provide reliable protection, meeting NEMA 1, 2, 3, 3R, 4, 6, 6P, and 13 as well as IP66, IP67, and IP68 requirements. Versions with boot seal also meet NEMA 12 requirements (dust, falling dirt, liquid media with solid contaminates). The cable or connector and basic switch terminals are encapsulated in an epoxy sealant, offering excellent resistance in harsh environments. For low temperature applications (down to -40 C, -40 F), CE Series switches can be supplied with low temperature seals and lubricant. The CE Series switches are rugged and versatile switches which can be applied indoors in many harsh factory floor applications, as well as on outdoor equipment in extreme temperatures. A full range of actuators are available, including plain plungers, roller plungers, side rotary, multi-directional wire, and manually operated. The switches are also available with the industry standard, M12 micro-change 4-pin connector. MICRO SWITCHTM 914CE products meet North American, cURus standards, as well as European CE requirements. What makes our switches better? Compact construction for minimal real estate on equipment Gang mounting capability to provide a multi-plunger limit switch Rugged, die-cast zinc housing for many demanding environments Variety of cable length options and choice of side or bottom exit cable/connector for design flexibility Functionality over a wide temperature range with factory sealed connectors or wiring Big performance in a little package. CUSTOMIZATION * COMPACT HIGH PERFORMING * DURABILITY 2 sensing.honeywell.com Features and Benefits RUGGED, COMPACT CONSTRUCTION MICRO SWITCHTM 914CE Series limit switches' compact construction means minimal real estate on equipment. Delivers consistent performance in many demanding environments where petroleum, synthetic or water based fluids are present. Its die-cast zinc housing and fluorocarbon diaphragm maintain a tightly sealed, NEMA 1, 2, 3, 3R, 4, 6, 6P, 12 (boot seal), and 13 IP66/67/68 rugged package. Gang-mounting option CUSTOMIZATION Switches are pre-leaded (UL cable) or supplied with a M12 four-pin connector to decrease installation time. 914CE Series' wide selection of actuators minimize installation or time issues. Cable length variations for equipment requiring different cable lengths with side and bottom exit cable/connector options for equipment flexibility. COMPACT DESIGN Rugged, compact switch with a 25 mm hole-hole mounting footprint. Engineered with a MICRO SWITCHTM SM switch for consistent, precise actuation. High performance switch for small spaces LONG LIFE Well suited for up to 10 million actuation cycles. (Up to 5 million actuation cycles for wobble actuators) DESIGN FLEXIBILITY Gang mounting capability to provide a multi-plunger limit switch. Low temperature variants available for indoor and outdoor applications. GLOBAL APPLICATIONS cURus, CE approvals for world-wide use. sensing.honeywell.com 3 Potential Applications MACHINE TOOLS Detects tool and piece part location on CNC and other machining equipment OFF-ROAD EQUIPMENT Used as a cab door switch on crane booms MATERIAL HANDLING Used in dock locks for trucks and trailers, and vehicle wash systems ACCESS AND MOBILITY SOLUTIONS Often used on vehicle wheelchair lifts and stairway lifts TEXTILE MACHINERY Senses roll size, tensioning, and other functions ROBOTICS Controls arm movement limits PACKAGING EQUIPMENT Often used on stretch pallet wrapping equipment COMMERCIAL APPLIANCES Functions as a door switch PRINT TRADE MACHINERY Senses roll size, tensioning, along with controlling gates and panels AGRICULTURAL MACHINERY Used on grain and livestock equipment 4 sensing.honeywell.com MICRO SWITCHTM Compact Precision Limit Switches Table 1. Specifications Characteristic Parameter Description compact enclosed limit switch * * * * * * * * * Actuators Top pin plunger (914CE1-) * Parallel roller plunger (914CE2-) Cross roller plunger (914CE3-) * Front rotary (914CE16-) Top pin plunger with boot seal (914CE18-) * Top adjustable plunger (914CE19-) Wobble (914CE20-) * Manually operated (914CE22-) Top pin plunger, panel mount (914CE27-) * Ball bearing plunger (914CE66-) Top roller plunger, parallel and panel mount (914CE28-) Top roller plunger, perpendicular, panel mount (914CE29-) Top roller plunger, parallel & boot sealed (914CE31-) Top roller plunger, perpendicular, boot seal (914CE55-) SJTO 4 x 0,75 mm2 (18 AWG) cable Connector (dc), 4-pin male, M12 thread (-Q), (-Q2) Revised pin-out, see page 6 Connector (ac), 4-pin male, 1/2 in x 20 thread (-Q1) Terminations Switching options SPDT, snap action contacts (1NC/1NO) IP66, IP67, IP68 (depending upon model) NEMA 1, 2, 3, 3R, 4, 6, 6P, 12 (boot seal), 13 Sealing 0 C to 105 C [32 F to 221 F] optional -40 C to 105 C [-40 F to 221F] Rotary: -40 C to 100 C [-40 F to 212 F] Operating temperature Mechanical life up to 10 million (up to 5 million for wobbles) Thermal current 1 A, 3 A, 5 A (depending upon model) Rated Insulation voltage (Ui) 250 V Rated impulse withstand voltage (Uimp) 1.5 kV Pollution degree 3 Min. actuation speed 0.003 m/s Max. actuation speed 0.1 m/s Max. actuation frequency ac - 200 Hz; dc - 20 Hz Shock 50 g - IEC68-2-27 Vibration 10 G - IEC68-2-6 Approvals cURus, CE IEC947-5-1, EN 60947-5-1; AC14 D300, DC13 R300 UL recognized to US and Canadian Requirements Conforming to standards Table 2. Electrical Ratings (in amperes) Model example 914CE* - * 914CE* - *G 914CE* -Q, -AQ, -AQ1, -Q2 Rating code A Contacts Silver contacts Gold contacts Silver contacts Rating A B C with 4-pin connector Electrical rating cURus, CE Make Break 240 Vac, ind. 1.2 0.2 240 Vac, res. 5 5 28 Vdc, res. 3 3 28 Vdc, ind. 3 3 5 A, 1/10 HP, 125 Vac or 250 Vac - - - - - - B cURus, CE 1 A res., 0.5 A ind., 30 Vdc 1 A, 125 Vac C cURus, CE 3 A, 125 Vac or 250 Vac sensing.honeywell.com 5 914CE Series SWITCHING AND LEAD IDENTIFICATION 914CE GREEN SPDT RED 2 BLACK 1 3 WHITE 2 3 1 PINOUTS Connector - (dc) (-Q) Connector (dc) (-Q2) 2 NO 3 2 1 3 Connector (ac) (-Q1) 3 1 1C NC CONNECTOR VERSIONS NO 3 MOUNTING The 914CE Series is available with a 4-pin, M12 size connector in MICRO SWITCHTM 914CE Series switches are mounted by using both bottom and side exit versions. two M5 or #10 screws. The mounting holes are counter bored to 1C NC -Q, -Q2 Versions Q1 Version keep the screw heads within the overall switch housing dimensions. 8.0 15 GANG MOUNT CAPABILITY The housing on the 914CE Series has been designed to enable 15 connector dcBrad typeHarrison 4 pin male , CAT.thread No.80466 M12 Thread M12 ac type, 4 pin male, 1/2 in x 20 thread the user to build his own multiple plunger switch by gang mounting several switches. All pin plunger and roller plunger types are OPTION Q suitable for gang mounting. There is a 16 mm distance between OPTION Q1 the plungers. Both series are very versatile that even a lever-type version could be added at the end of the row. BOTTOM EXIT OR SIDE EXIT ORIENTATION The CE Series has been designed with a pre-wired cable fittied in the bottom of the switch housing. Other variations are available with a side exit cable. GOLD CONTACT VERSIONS For low energy applications (up to 30 Vdc, 1 A), gold contact versions of the 914CE switches can be supplied upon request. 6 sensing.honeywell.com MICRO SWITCHTM Compact Precision Limit Switches GENERAL DIMENSIONS * ALL SWITCHES CABLE VERSION 40 mm max. [1.57 in max.] 16 mm max. [0.63 in max.] 25 mm [0.98 in] Two (2) holes O 5.1 mm [O 0.2 in] dia. c/bore 10,2 mm dia x 6 mm deep [0.40 in dia x 0.24 in deep] (Both sides - option "A" only) Pretravel (PT) Overtravel (OT) 3 mm min. [0.12 in min.] Max. free length Operating position (OP) 7,6 mm [0.30 in] M12 thread 44 mm max. [1.73 in max.] SWITCHTM 914CE Miniature Limit Switch 8,0 mm t Nomenclature [0.31 in] TYPE Q OE Q2 8,0 mm [0.32 in] 1/2 x 20 UNF thread TYPE Q1 PRODUCT NOMENCLATURE 29 Switch Type Actuator Type 914CE Series Small Precision Limit Switch 3 - 914CE Connectors Options1 Cable Length dc type single keyway 1 Top pin plunger 22 Manually oper. nylon button 3 3 feet A Side entry 2 Top roller plunger, parallel 27 Top pin plunger panel mount 6 6 feet G Gold contacts Q1 ac type two keyways 3 Top roller plunger, perp. 28 Top roller plunger, parallel panel mount 9 9 feet P Top mounting Q2 dc type optional pin-out 16 Front rotary 29 Top roller plunger, perp. panel mount 12 12 feet L1 Low temp. -40 C, cable not for flexing 18 Top pin plunger w/ boot seal 31 Top roller plunger, parallel boot seal 15 15 feet V Vitron seals/ gasket (front rotary only) 19 Top adjustable pin plunger 55 Top roller plunger, perp. boot seal 20 Coil wobble 66 plunger Q Bottom exit is standard. Top ball bearing NOTE: not all combinations of model code are available. Please contact your Honeywell provider/representative for assistance. More than one option may be permissible. 1 sensing.honeywell.com 7 914CE Series PRODUCT SPECIFICATIONS AND LISTINGS Contact your Honeywell rep or distributor for additional listings 914CE1 * Pin Plunger 914CE27 * Pin Plunger Panel Mount O10,0 mm [O0.39 in] PT OT FP OP Pretravel * 1,8 mm [0.071 in] Diff. travel * 0,1 mm [0.004 in] Overtravel * 3,0 mm [0.118 in] Oper. force * 12,2 N [2.75 in-lb] M10 X 1 METRIC THREAD 12 mm [0.49 in] THREADED LENGTH OT PT FP OP 914CE18 * Boot Sealed Pin Plunger O7,0 mm [O0.28 in] OT BOOT SEAL PT Pretravel * 1,8 mm [0.071 in] Diff. travel * 0,1 mm [0.004 in] Overtravel * 3,0 mm [0.118 in] Oper. force * 22,2 N [5 in-lb] FP OP 914CE66 * Ball Bearing Plunger 7,9 mm [0.31 in] DIA BALL BEARING OT OP 8 PT FP Pretravel * 1,8 mm [0.071 in] Diff. travel * 0,1 mm [0.004 in] Overtravel * 3,0 mm [0.118 in] Oper. force * 12,2 N [2.75 in-lb] sensing.honeywell.com Contacts Elec Rating Cable Exit Free Position (FP) Operating Position (OP) Options Listing Silver A Bottom 17,5 mm [0.69 in] 15,7 mm [0.62 in] - 914CE1-3 Gold B Bottom 17,5 mm [0.69 in] 15,7 mm [0.62 in] - 914CE1-3G Silver A Side 17,5 mm [0.69 in] 15,7 mm [0.62 in] - 914CE1-3A Silver A Bottom 31,1 mm [1.23 in] 29,3 mm [1.15 in] Panel mount 914CE27-3 Silver C Bottom 17,5 mm [0.69 in] 15,7 mm [0.62 in] dc-type, single keyway 914CE1-Q Silver C Bottom 17,5 mm [0.69 in] 15,7 mm [0.62 in] ac-type, two keyways 914CE1-Q1 Contacts Elec Rating Cable Exit Free Position (FP) Operating Position (OP) Options Listing Silver A Bottom 26,7 mm [1.05] 24,9 mm [0.98 in] 914CE18-3 Silver A Side 26,7 mm [1.05] 24,9 mm [0.98 in] 914CE18-3A Silver A Bottom 26,7 mm [1.05] 24,9 mm [0.98 in] Fluorocarbon seals 914CE18-3V Silver C Bottom 26,7 mm [1.05] 24,9 mm [0.98 in] ac-type, two keyways 914CE18-Q1 Silver C Side 26,7 mm [1.05] 24,9 mm [0.98 in] ac-type, two keyways 914CE18-AQ1 Contacts Elec Rating Cable Exit Free Position (FP) Operating Position (OP) Options Listing Silver A Bottom 26,2 mm [1.03 in] 24,4 mm [0.96 in] 914CE66-3 MICRO SWITCHTM Compact Precision Limit Switches 914CE2 * Roller Plunger 914CE28 * Roller Plunger Panel Mount O12,4 mm [O0.49 in] PT OT FP OP Pretravel * 1,8 mm [0.071 in] Diff. travel * 0,1 mm [0.004 in] Overtravel * 3,0 mm [0.118 in] Oper. force * 12,2 N [2.75 in-lb] ROLLER O 12,4 mm x 4,7 mm [O 0.48 in x 0.020 in] M14 X 1 THREAD OT Contacts Elec Rating Cable Exit Free Position (FP) Operating Position (OP) Silver A Gold Bottom 30,3 mm [1.19 in] 28,5 mm [1.12 in] 914CE2-3 B Bottom 30,3 mm [1.19 in] 28,5 mm [1.12 in] 914CE2-3G Silver C Bottom 30,3 mm [1.19 in] 28,5 mm [1.12 in] ac-type, two keyways 914CE2-Q1 Silver C Bottom 30,3 mm [1.19 in] 28,5 mm [1.12 in] dc-type, single keyway 914CE2-Q Silver A Side 30,3 mm [1.19 in] 28,5 mm [1.12 in] Silver A Bottom 44,3 mm [1.75 in] 42,5 mm [1.67 in] Panel mount 914CE28-3 Silver C Bottom 44,3 mm [1.75 in] 42,5 mm [1.67 in] Panel mount, actype, two keyways 914CE28-Q1 Contacts Elec Rating Cable Exit Free Position (FP) Operating Position (OP) Options Listing Silver A Bottom 36,2 mm [1.43 in] 34,4 mm [1.36 in] Silver A Bottom 36,2 mm [1.43 in] 34,4 mm [1.36 in] Fluorocarbon seals 914CE31-3V Contacts Elec Rating Cable Exit Free Position (FP) Operating Position (OP) Options Listing Silver A Bottom 30,3 mm [1.19 in] 28,5 mm [1.12 in] 914CE3-3 Gold B Bottom 30,3 mm [1.19 in] 28,5 mm [1.12 in] 914CE3-3G Silver A Side 30,3 mm [1.19 in] 28,5 mm [1.12 in] 914CE3-3A Silver A Bottom 44,3 mm [1.75 in] 42,5 mm [1.67 in] Panel mount 914CE29-3 Silver C Bottom 30,3 mm [1.19 in] 28,5 mm [1.12 in] dc-type, single keyway 914CE3-Q Silver C Bottom 30,3 mm [1.19 in] 28,5 mm [1.12 in] ac-type, two keyways 914CE3-Q1 PT FP OP 914CE31 * Boot Sealed Roller Plunger ROLLER O 12,4 mm x 4,7 mm O 0.48 in x 0.020 in] BOOT SEAL OT PT FP OP Pretravel * 1,8 mm [0.071 in] Diff. travel * 0,1 mm [0.004 in] Overtravel * 3,0 mm [0.118 in] Oper. force * 22,2 N [5 in-lb] 914CE3 * Cross Roller Plunger 914CE29 * Cross Roller Panel Mount OT O12,4 mm [O0.49 in] PT FP OP Pretravel * 1,8 mm [0.071 in] Diff. travel * 0,1 mm [0.004 in] Overtravel * 3,0 mm [0.118 in] Oper. force * 12,2 N [2.75 in-lb] ROLLER O 12,4 mm x 4,7 mm O 0.48 in x 0.020 in] M14 X 1 THREAD OT Options Listing 914CE2-3A 914CE31-3 PT OP FP Note: part numbers are shown with 3 ft of cable. The -X indicates the number of feet of cable provided. 6-foot, 9-foot lengths, and 12-foot lengths along with custom lengths, are also available. sensing.honeywell.com 9 914CE Series 914CE55 * Boot Sealed Cross Roller Plunger ROLLER O 12,4 mm x 4,7 mm O 0.48 in x 0.020 in] BOOT SEAL PT OT FP OP FP PT OT OT DT DT 18,9 mm [0.74 in] Actuator shaft O7,32 mm [O0.288 in] Pretravel * 30 Diff. travel * 3 Overtravel * 40 Oper. force * 0,34 Nm [3 in-lb] 914CE22 * Manually Operated NYLON BUTTON O26,4 mm [O1.04 in] OT PT FP OP M4 CORROSION RESISTANT SCREW AND LOCKNUT PT OP 1 FP [ADJUSTABLE] Cable Exit Free Position (FP) Operating Position (OP) Silver A Bottom 36,2 mm [1.43 in] 34,4 mm [1.36 in] Contacts Elec Rating Cable Exit Free Position (FP) Operating Position (OP) Silver A Bottom - - 914CE16-31 Silver A Side - - 914CE16-3A1 Silver C Bottom - - ac-type, two keyways 914CE16-Q11 Silver C Bottom - - dc-type, single keyway 914CE16-Q11 Silver C Side - - ac-type, two keyways 914CE16-AQ11 Contacts Elec Rating Cable Exit Free Position (FP) Operating Position (OP) Options Listing Silver A Bottom 29,2 mm [1.15 in] 27,4 mm [1.08] 23,9 mm [0.94 in] dia. button 914CE22-3 Contacts Elec Rating Cable Exit Free Position (FP) Operating Position (OP) Options Listing Silver A Bottom Gold B Bottom Silver A Side Silver C Bottom Adjust. 33,8 mm to 40,8 mm [1.33 in to 1.61 in] Adjust. 32 mm to 39 mm [1.26 in to 1.54 in] Pretravel * 1,8 mm [0.071 in] Diff. travel * 0,1 mm [0.004 in] Overtravel * 3,0 mm [0.118 in] Oper. force * 8,9 N [2 in-lb] 914CE19 * Adjustable Plunger OT Elec Rating Pretravel * 1,8 mm [0.071 in] Diff. travel * 0,1 mm [0.004 in] Overtravel * 3,0 mm [0.118 in] Oper. force * 17,5 N [5 lb] Switch operates on clockwise and counterclockwise rotation of lever shaft 10 Options Listing 914CE55-3 Pretravel * 1,8 mm [0.071 in] Diff. travel * 0,1 mm [0.004 in] Overtravel * 3,0 mm [0.118 in] Oper. force * 22,2 N [5 in-lb] 914CE16 * Side Rotary PT Contacts sensing.honeywell.com Options Listing 914CE19-3 914CE19-3G 914CE19-3A ac-type, two keyways 914CE19-Q1 MICRO SWITCHTM Compact Precision Limit Switches 914CE20 * Random Motion Wire Actuator OP ALL DIRECTIONS EXCEPT DIRECT PULL Contacts Elec Rating Cable Exit Free Position (FP) Operating Position (OP) Silver A Bottom - - Silver A Side - - 914CE20-3 914CE20-3A dc-type, single keyway 914CE20-Q C Bottom Contacts Elec Rating Cable Exit Free Position (FP) Operating Position (OP) Options Listing Silver A Bottom - - available with 9-feet of cable only 914CE20-9N24 Oper. point * 28 mm [1.10 in] max. Oper. force * 0,55 N [0.12 lb] max. 335,0 mm max. [13,98 mm max.] 25 mm [1.00 in] max. operating position in all directions except pull 914CE20-9N24 * Random Motion Plastic Actuator 101 mm [3.97 in] Listing Silver O1.8 mm [O0.07 in] O 5,0 mm [O 0.20 in] Options Oper. point * 25 mm [0.93 in] max. in all directions except pull Oper. force * 0,55 N [0.12 lb] max. Note: part numbers are shown with 3 ft of cable. The -X indicates the number of feet of cable provided. 6-foot, 9-foot lengths, and 12-foot lengths along with custom lengths, are also available. sensing.honeywell.com 11 914CE Series This Honeywell datasheet supports the following MICRO SWITCHTM 914CE Series Limit Switch Listings 914CE1-12 914CE1-12A 914CE1-15 914CE1-15A 914CE1-3 914CE1-3A 914CE1-3AK 914CE1-3AKV 914CE1-3G 914CE1-3K 914CE1-6 914CE16-12 914CE16-18 914CE16-18V 914CE16-27 914CE16-3 914CE16-3A 914CE16-3N1 914CE16-6 914CE16-6A 914CE16-6AN14 914CE16-9 914CE16-9A 914CE1-6A 914CE16-AQ 914CE16-AQ2 914CE1-6G 914CE1-6K 914CE1-6L1 914CE16-N53 914CE16-N54 914CE16-N79 914CE16-N82 914CE16-N91 914CE16-Q 914CE16-Q1 914CE16-Q2 914CE16QV 914CE16-QV 914CE16-RH29 914CE16-VCQ1 914CE18-12 914CE18-12AL1 914CE18-15 914CE18-15A 914CE18-21A 914CE1827 914CE18-27 914CE18-3 914CE18-3A 914CE18-3AL1 914CE18-6 914CE18-6A 914CE18-9 914CE18-9A 914CE18-9AGL1 914CE18-9AL1 914CE18-9V 914CE18-AQ 914CE18-AQ1 12 914CE18-GQ 914CE18-Q 914CE18-Q1 914CE1-9 914CE19-12 914CE19-3 914CE19-6 914CE19-9 914CE19-9A 914CE1-9A 914CE1-AKQ 914CE1-AKQ1 914CE1-AQ 914CE1-AQ1 914CE1-GQ1 914CE1-KQ 914CE1-KQ1 914CE1-N94 914CE1-Q 914CE1-Q1 914CE1-Q2 914CE20-12 914CE20-12G 914CE20-12GL1 914CE20-3 914CE20-6 914CE20-9 914CE20-9L1 914CE20-N69 914CE20-N77 914CE20-Q 914CE20-Q1 914CE2-12 914CE2-12AK 914CE2-12GK 914CE2-12GKL1 914CE212GL1 914CE2-12KL1 914CE2-15 914CE2-15A 914CE2-18 914CE2-21 914CE22-12 914CE2-21N36 914CE22-3 914CE2-24K 914CE22-6 914CE2-27 914CE22-9 914CE2-3 914CE2-33 914CE2-33AK 914CE2-33K 914CE2-33N37 914CE2-3A 914CE2-3AK 914CE2-3AL1 914CE2-3G 914CE2-3K 914CE2-3KL1 sensing.honeywell.com 914CE2-3KV 914CE2-3L1 914CE2-6 914CE2-6A 914CE2-6AK 914CE2-6-C 914CE2-6G 914CE2-6K 914CE2-6KV 914CE27-12 914CE27-3 914CE27-6 914CE27-9 914CE27-AGQ1 914CE27-GQ1 914CE27-Q 914CE28-12 914CE28-18 914CE28-3 914CE28-6 914CE28-9 914CE28-Q 914CE28-Q1 914CE2-9 914CE29-3 914CE29-6 914CE299 914CE29-9 914CE29-9L1 914CE2-9A 914CE2-9AK 914CE2-9AL1 914CE2-9C 914CE2-9G 914CE2-9K 914CE2-9KL1 914CE2-9L1 914CE29Q 914CE2-9Q 914CE29-Q 914CE2-AGQ 914CE2-AKLQ 914CE2-AKQV 914CE2-AQ 914CE2-AQ1 914CE2-KQ 914CE2-KQ1 914CE2-KQV 914CE2-N47 914CE2-N49 914CE2-N50 914CE2-N51 914CE2-N55 914CE2-N57 914CE2-N58 914CE2-N59 914CE2N67 914CE2-N67 914CE2-N71 914CE2-N81 914CE2-N83 914CE2-N85 914CE2-N86 914CE2-N87 914CE2-N88 914CE2-N89 914CE2-N92 914CE2-N95 914CE2-N96 914CE2-Q 914CE2-Q1 914CE2-Q2 914CE31-12 914CE31-12A 914CE31-12AV 914CE31-18 914CE3-12 914CE3-12AK 914CE3-12K 914CE31-3 914CE31-3A 914CE31-3C 914CE31-3L1 914CE31-3V 914CE31-6 914CE31-9AL1 914CE31-9L1 914CE31-9V 914CE31-AQ 914CE31-N52 914CE31-RH09 914CE3-3 914CE3-3A 914CE3-3AK 914CE3-3AL1 914CE3-3G 914CE3-3K 914CE3-3KL1 914CE3-3L1 914CE3-6 914CE3-6A 914CE3-6AK 914CE3-6G 914CE3-6K 914CE3-9 914CE3-9AK 914CE3-9G 914CE3-9K 914CE3-9L1 914CE3-9V 914CE3-AKQ 914CE3-AQ 914CE3-KQ 914CE3-KQ1 914CE3-N93 914CE3-Q 914CE3-Q1 914CE55-12 914CE55-3 914CE553A 914CE55-3A 914CE55-3AG 914CE66-12 914CE66-3 914CE66-6 914CE66-9 MICRO SWITCHTM Compact Precision Limit Switches ADDITIONAL INFORMATION The following associated literature is available on the Web at sensing.honeywell.com: * Product installation instructions * Product range guide * Product nomenclature tree * Product application-specific information WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. - Limit and enclosed switches application information WARNING - Limit and enclosed switches operating characteristics - Limit and enclosed switches reference standards MISUSE OF DOCUMENTATION - Limit and enclosed switches typical applications * - Product flyer: CE Family Miniature Limit Switches * The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. sensing.honeywell.com 13 Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell's sensing and control products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 honeywell.com 002381-3-EN IL50 GLO December 2013 Copyright (c) 2013 Honeywell International Inc. All rights reserved.