MICRO SWITCH™
Compact Precision Limit Switches
914CE Series
Datasheet
2sensing.honeywell.com
What makes our switches better?
Compact construction for minimal real estate on equipment
Gang mounting capability to provide a multi-plunger
limit switch
Rugged, die-cast zinc housing for many demanding environments
Variety of cable length options and choice of side or bottom exit
cable/connector for design flexibility
Functionality over a wide temperature range with factory sealed
connectors or wiring
MICRO SWITCH™ 914CE Series
Compact Precision Limit Switches
All MICRO SWITCH™ 914CE Series compact enclosed switches incorporate uorocarbon diaphragm sealing to
provide reliable protection, meeting NEMA 1, 2, 3, 3R, 4, 6, 6P, and 13 as well as IP66, IP67, and IP68 requirements.
Versions with boot seal also meet NEMA 12 requirements (dust, falling dirt, liquid media with solid contaminates). The
cable or connector and basic switch terminals are encapsulated in an epoxy sealant, offering excellent resistance in
harsh environments. For low temperature applications (down to -40 °C, -40 °F), CE Series switches can be supplied
with low temperature seals and lubricant.
The CE Series switches are rugged and versatile switches which can be applied indoors in many harsh factory oor
applications, as well as on outdoor equipment in extreme temperatures. A full range of actuators are available, includ-
ing plain plungers, roller plungers, side rotary, multi-directional wire, and manually operated. The switches are also
available with the industry standard, M12 micro-change 4-pin connector. MICRO SWITCH™ 914CE products meet
North American, cURus standards, as well as European CE requirements.
CUSTOMIZATION • COMPACT
HIGH PERFORMING • DURABILITY
Big performance in a little package.
3
sensing.honeywell.com
Features
and Benefits
Features
and Benefits
RUGGED, COMPACT CONSTRUCTION
MICRO SWITCH™ 914CE Series limit switches’ compact construction means
minimal real estate on equipment. Delivers consistent performance in many
demanding environments where petroleum, synthetic or water based fluids are
present. Its die-cast zinc housing and fluorocarbon diaphragm maintain a tightly
sealed, NEMA 1, 2, 3, 3R, 4, 6, 6P, 12 (boot seal), and 13 IP66/67/68
rugged package.
CUSTOMIZATION
Switches are pre-leaded (UL cable) or supplied with a M12 four-pin connector
to decrease installation time. 914CE Series’ wide selection of actuators minimize
installation or time issues. Cable length variations for equipment requiring
different cable lengths with side and bottom exit cable/connector options for
equipment flexibility.
COMPACT DESIGN
Rugged, compact switch with a 25 mm hole-hole mounting footprint.
Engineered with a MICRO SWITCH™ SM switch for consistent, precise
actuation.
LONG LIFE
Well suited for up to 10 million actuation cycles. (Up to 5 million actuation cycles
for wobble actuators)
DESIGN FLEXIBILITY
Gang mounting capability to provide a multi-plunger limit switch. Low
temperature variants available for indoor and outdoor applications.
GLOBAL APPLICATIONS
cURus, CE approvals for world-wide use.
High performance switch for small spaces
Gang-mounting option
4sensing.honeywell.com
MACHINE TOOLS
Detects tool and piece part location on CNC and other machining equipment
OFF-ROAD EQUIPMENT
Used as a cab door switch on crane booms
MATERIAL HANDLING
Used in dock locks for trucks and trailers, and vehicle wash systems
ACCESS AND MOBILITY SOLUTIONS
Often used on vehicle wheelchair lifts and stairway lifts
TEXTILE MACHINERY
Senses roll size, tensioning, and other functions
ROBOTICS
Controls arm movement limits
PACKAGING EQUIPMENT
Often used on stretch pallet wrapping equipment
COMMERCIAL APPLIANCES
Functions as a door switch
PRINT TRADE MACHINERY
Senses roll size, tensioning, along with controlling gates and panels
AGRICULTURAL MACHINERY
Used on grain and livestock equipment
Potential Applications
5
sensing.honeywell.com
MICRO SWITCH™ Compact Precision Limit Switches
Table 1. Specifications
Characteristic Parameter
Description compact enclosed limit switch
Actuators
Top pin plunger (914CE1-) • Parallel roller plunger (914CE2-)
Cross roller plunger (914CE3-) • Front rotary (914CE16-)
• Top pin plunger with boot seal (914CE18-) • Top adjustable plunger (914CE19-)
• Wobble (914CE20-) • Manually operated (914CE22-)
Top pin plunger, panel mount (914CE27-) • Ball bearing plunger (914CE66-)
Top roller plunger, parallel and panel mount (914CE28-)
• Top roller plunger, perpendicular, panel mount (914CE29-)
• Top roller plunger, parallel & boot sealed (914CE31-)
• Top roller plunger, perpendicular, boot seal (914CE55-)
Terminations
SJTO 4 x 0,75 mm2 (18 AWG) cable
Connector (dc), 4-pin male, M12 thread (-Q), (-Q2) Revised pin-out, see page 6
Connector (ac), 4-pin male, 1/2 in x 20 thread (-Q1)
Switching options SPDT, snap action contacts (1NC/1NO)
Sealing IP66, IP67, IP68 (depending upon model)
NEMA 1, 2, 3, 3R, 4, 6, 6P, 12 (boot seal), 13
Operating temperature 0 °C to 105 °C [32 °F to 221 °F] optional -40 °C to 105 °C [-40 °F to 221°F]
Rotary: -40° C to 100 °C [-40 °F to 212 °F]
Mechanical life up to 10 million (up to 5 million for wobbles)
Thermal current 1 A, 3 A, 5 A (depending upon model)
Rated Insulation voltage (Ui) 250 V
Rated impulse withstand volt-
age (Uimp) 1.5 kV
Pollution degree 3
Min. actuation speed 0.003 m/s
Max. actuation speed 0.1 m/s
Max. actuation frequency ac – 200 Hz; dc – 20 Hz
Shock 50 g – IEC68-2-27
Vibration 10 G – IEC68-2-6
Approvals cURus, CE
Conforming to standards IEC947-5-1, EN 60947-5-1; AC14 D300, DC13 R300
UL recognized to US and Canadian Requirements
Table 2. Electrical Ratings (in amperes)
Model example Contacts Rating
914CE* - * Silver contacts A
914CE* - *G Gold contacts B
914CE* -Q, -AQ, -AQ1, -Q2 Silver contacts C
Rating code Electrical rating Make Break
AcURus,
CE
240 Vac, ind. 1.2 0.2
240 Vac, res. 5 5
28 Vdc, res. 3 3
28 Vdc, ind. 3 3
5 A, 1/10 HP, 125 Vac or 250 Vac
B cURus, CE 1 A res., 0.5 A ind., 30 Vdc
1 A, 125 Vac
C cURus, CE 3 A, 125 Vac or 250 Vac
with 4-pin connector
6sensing.honeywell.com
914CE Series
SWITCHING AND LEAD IDENTIFICATION
914CE
GREEN
BLACK
1
RED
2
3
WHITE
SPDT
PINOUTS
Connector - (dc) (-Q) Connector (dc) (-Q2) Connector (ac) (-Q1)
1
3
2
1
3
NO
NC
C
3
1
2
1
3
2
1
3
NO
NC
C
CONNECTOR VERSIONS
The 914CE Series is available with a 4-pin, M12 size connector in
both bottom and side exit versions.
-Q, -Q2 Versions Q1 Version
8.0
Brad Harrison connecto
r
CAT. No.80466 M12
Thread
15
OPTION Q
dc type 4 pin male,
M12 thread
15
OPTION Q1
ac type, 4 pin male,
1/2 in x 20 thread
MOUNTING
MICRO SWITCH™ 914CE Series switches are mounted by using
two M5 or #10 screws. The mounting holes are counter bored to
keep the screw heads within the overall switch housing dimen-
sions.
GANG MOUNT CAPABILITY
The housing on the 914CE Series has been designed to enable
the user to build his own multiple plunger switch by gang mount-
ing several switches. All pin plunger and roller plunger types are
suitable for gang mounting. There is a 16 mm distance between
the plungers. Both series are very versatile that even a lever-type
version could be added at the end of the row.
BOTTOM EXIT OR SIDE EXIT ORIENTATION
The CE Series has been designed with a pre-wired cable ttied in
the bottom of the switch housing. Other variations are available
with a side exit cable.
GOLD CONTACT VERSIONS
For low energy applications (up to 30 Vdc, 1 A), gold contact ver-
sions of the 914CE switches can be supplied upon request.
7
sensing.honeywell.com
MICRO SWITCH™ Compact Precision Limit Switches
44 mm max.
[1.73 in max.]
25 mm
[0.98 in]
16 mm max.
[0.63 in max.]
40 mm max.
[1.57 in max.]
Max. free length
Operating
position (OP)
3 mm min.
[0.12 in min.]
8,0 mm
[0.31 in] 8,0 mm
[0.32 in]
7,6 mm
[0.30 in]
Pretravel (PT)
Overtravel (OT)
CABLE VERSION
TYPE
Q OE Q2 TYPE
Q1
M12
thread 1/2 x 20 UN
F
thread
Two (2) holes Ø 5.1 mm [Ø 0.2 in] dia. c/bore
10,2 mm dia x 6 mm deep [0.40 in dia x 0.24 in deep]
(Both sides - option “A” only)
GENERAL DIMENSIONS • ALL SWITCHES
PRODUCT NOMENCLATURE
3
16
2
1Top pin
plunger
Top roller
plunger, parallel
Top roller
plunger, perp.
Front
rotary
914CE
Switch Type
29
Actuator Type Options1
P
G
ASide entry
Gold
contacts
Top
mounting
MICRO SWITCH™ 914CE Miniature Limit Switch
Product Nomenclature
19
18 Top pin plunger
w/ boot seal
Top adjustable
pin plunger
29
31
28
27 Top pin plunger
panel mount
Top roller
plunger, parallel
panel mount
Top roller
plunger, perp.
panel mount
Top roller
plunger, parallel
boot seal
66
55 Top roller
plunger, perp.
boot seal
Top ball bearing
plunger
914CE Series
Small Precision
Limit Switch
L1 Low temp.
-40 °C, cable
not for flexing
9
6
33 feet
6 feet
9 feet
12 12 feet
15 15 feet
3
Cable Length
20 Coil
wobble
22 Manually oper.
nylon button
VVitron seals/
gasket
(front rotary only)
Connectors
Q2
Q1
Qdc type
single keyway
ac type
two keyways
dc type
optional pin-out
Bottom exit is
standard.
NOTE: not all combinations of model code are available.
Please contact your Honeywell provider/representative for assistance.
1More than one option may be permissible.
8sensing.honeywell.com
914CE Series
914CE1 • Pin Plunger
914CE27 • Pin Plunger Panel Mount
Contacts Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options Listing
FP
PT
OP
OT
M10 X 1 METRIC THREAD
12 mm [0.49 in]
THREADED LENGTH
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 12,2 N [2.75 in-lb]
Silver A Bottom 17,5 mm
[0.69 in]
15,7 mm
[0.62 in] 914CE1-3
Gold B Bottom 17,5 mm
[0.69 in]
15,7 mm
[0.62 in] 914CE1-3G
Silver A Side 17,5 mm
[0.69 in]
15,7 mm
[0.62 in] 914CE1-3A
Silver A Bottom 31,1 mm
[1.23 in]
29,3 mm
[1.15 in] Panel mount 914CE27-3
Silver C Bottom 17,5 mm
[0.69 in]
15,7 mm
[0.62 in]
dc-type, single
keyway 914CE1-Q
Silver C Bottom 17,5 mm
[0.69 in]
15,7 mm
[0.62 in]
ac-type,
two keyways 914CE1-Q1
914CE18 • Boot Sealed Pin Plunger Contacts Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options Listing
FP
OT
PT
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 22,2 N [5 in-lb]
Silver A Bottom 26,7 mm
[1.05]
24,9 mm
[0.98 in] 914CE18-3
Silver A Side 26,7 mm
[1.05]
24,9 mm
[0.98 in] 914CE18-3A
Silver A Bottom 26,7 mm
[1.05]
24,9 mm
[0.98 in]
Fluorocarbon
seals 914CE18-3V
Silver C Bottom 26,7 mm
[1.05]
24,9 mm
[0.98 in]
ac-type,
two keyways 914CE18-Q1
Silver C Side 26,7 mm
[1.05]
24,9 mm
[0.98 in]
ac-type,
two keyways 914CE18-AQ1
914CE66 • Ball Bearing Plunger Contacts Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options Listing
FP
OP
OT PT
7,9 mm [0.31 in] DIA
BALL BEARING
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 12,2 N [2.75 in-lb]
Silver A Bottom 26,2 mm
[1.03 in]
24,4 mm
[0.96 in] 914CE66-3
Ø10,0 mm
[Ø0.39 in]
FP
OP
OT PT
PRODUCT SPECIFICATIONS AND LISTINGS
Contact your Honeywell rep or distributor for additional listings
9
sensing.honeywell.com
MICRO SWITCH™ Compact Precision Limit Switches
914CE2 • Roller Plunger
914CE28 • Roller Plunger Panel Mount
Contacts Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options Listing
FP
PT
OP
OT
M14 X 1 THREAD
ROLLER
Ø 12,4 mm x 4,7 mm
0.48 in x 0.020 in]
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 12,2 N [2.75 in-lb]
Silver A Bottom 30,3 mm
[1.19 in]
28,5 mm
[1.12 in] 914CE2-3
Gold B Bottom 30,3 mm
[1.19 in]
28,5 mm
[1.12 in] 914CE2-3G
Silver C Bottom 30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
ac-type, two
keyways 914CE2-Q1
Silver C Bottom 30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
dc-type,
single keyway 914CE2-Q
Silver A Side 30,3 mm
[1.19 in]
28,5 mm
[1.12 in] 914CE2-3A
Silver A Bottom 44,3 mm
[1.75 in]
42,5 mm
[1.67 in] Panel mount 914CE28-3
Silver C Bottom 44,3 mm
[1.75 in]
42,5 mm
[1.67 in]
Panel mount, ac-
type, two keyways 914CE28-Q1
914CE31 • Boot Sealed Roller Plunger Contacts Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options Listing
FP
OP
OT
PT
BOOT SEAL
ROLLER
Ø 12,4 mm x 4,7 mm
Ø 0.48 in x 0.020 in]
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 22,2 N [5 in-lb]
Silver A Bottom 36,2 mm
[1.43 in]
34,4 mm
[1.36 in] 914CE31-3
Silver A Bottom 36,2 mm
[1.43 in]
34,4 mm
[1.36 in]
Fluorocarbon
seals 914CE31-3V
914CE3 • Cross Roller Plunger
914CE29 • Cross Roller Panel Mount
Contacts Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options Listing
FP
PT
OP
OT
M14 X 1 THREAD
ROLLER
Ø 12,4 mm x 4,7 mm
Ø 0.48 in x 0.020 in]
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 12,2 N [2.75 in-lb]
Silver A Bottom 30,3 mm
[1.19 in]
28,5 mm
[1.12 in] 914CE3-3
Gold B Bottom 30,3 mm
[1.19 in]
28,5 mm
[1.12 in] 914CE3-3G
Silver A Side 30,3 mm
[1.19 in]
28,5 mm
[1.12 in] 914CE3-3A
Silver A Bottom 44,3 mm
[1.75 in]
42,5 mm
[1.67 in] Panel mount 914CE29-3
Silver C Bottom 30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
dc-type,
single keyway 914CE3-Q
Silver C Bottom 30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
ac-type,
two keyways 914CE3-Q1
FP
OP
OT
PT
Ø12,4 mm
[Ø0.49 in]
Ø12,4 mm
[Ø0.49 in]
FP
OP
OT PT
Note: part numbers are shown with 3 ft of cable. The -X indicates the number of feet of cable provided. 6-foot, 9-foot lengths, and 12-foot lengths along
with custom lengths, are also available.
10 sensing.honeywell.com
914CE Series
914CE55 • Boot Sealed Cross Roller
Plunger
Contacts Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options Listing
FP
OP
OT
PT
BOOT SEAL
ROLLER
Ø 12,4 mm x 4,7 mm
Ø 0.48 in x 0.020 in]
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 22,2 N [5 in-lb]
Silver A Bottom 36,2 mm
[1.43 in]
34,4 mm
[1.36 in] 914CE55-3
914CE16 • Side Rotary Contacts Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options Listing
PT
OT
PT
OT
18,9 mm
[0.74 in]
Actuator shaf
t
Ø7,32 mm
[Ø0.288 in]
DT
DT
FP
Pretravel • 30°
Diff. travel •
Overtravel • 40°
Oper. force • 0,34 Nm [3 in-lb]
Silver A Bottom 914CE16-31
Silver A Side 914CE16-3A1
Silver C Bottom ac-type, two
keyways 914CE16-Q11
Silver C Bottom dc-type,
single keyway 914CE16-Q11
Silver C Side ac-type, two
keyways 914CE16-AQ11
914CE22 • Manually Operated Contacts Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options Listing
FP
PT
OP
OT
Ø26,4 mm
[Ø1.04 in]
NYLON BUTTON
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 8,9 N [2 in-lb]
Silver A Bottom 29,2 mm
[1.15 in]
27,4 mm
[1.08]
23,9 mm [0.94 in]
dia. button 914CE22-3
914CE19 • Adjustable Plunger Contacts Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options Listing
FP
[ADJUST
ABLE]
OP
OT
PT
M4 CORROSION
RESISTANT SCREW AND LOCKNUT
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 17,5 N [5 lb]
Silver A Bottom
Adjust.
33,8 mm
to 40,8
mm
[1.33 in to
1.61 in]
Adjust.
32 mm to
39 mm
[1.26 in to
1.54 in]
914CE19-3
Gold B Bottom 914CE19-3G
Silver A Side 914CE19-3A
Silver C Bottom ac-type, two
keyways 914CE19-Q1
1 Switch operates on clockwise and counterclockwise rotation of lever shaft
11
sensing.honeywell.com
MICRO SWITCH™ Compact Precision Limit Switches
914CE20 • Random Motion
Wire Actuator
Contacts Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options Listing
OP
ALL DIRECTIONS
EXCEPT DIRECT
PULL
335,0 mm max.
[13,98 mm max.]
Ø1.8 mm
[Ø0.07 in]
Oper. point • 28 mm [1.10 in] max.
Oper. force • 0,55 N [0.12 lb] max.
Silver A Bottom 914CE20-3
Silver A Side 914CE20-3A
Silver C Bottom dc-type,
single keyway 914CE20-Q
914CE20-9N24 • Random Motion
Plastic Actuator
Contacts Elec
Rating
Cable
Exit
Free
Position
(FP)
Operating
Position
(OP)
Options Listing
101 mm
[3.97 in]
Ø 5,0 mm [Ø 0.20 in]
25 mm [1.00 in] max.
operating position in al
l
directions except pull
Oper. point • 25 mm [0.93 in]
max. in all directions except pull
Oper. force • 0,55 N [0.12 lb]
max.
Silver A Bottom available with
9-feet of cable
only
914CE20-9N24
Note: part numbers are shown with 3 ft of cable. The -X indicates the number of feet of cable provided. 6-foot, 9-foot lengths, and 12-foot lengths along with
custom lengths, are also available.
12 sensing.honeywell.com
914CE Series
This Honeywell datasheet supports the following MICRO SWITCH™ 914CE Series Limit Switch Listings
914CE1-12
914CE1-12A
914CE1-15
914CE1-15A
914CE1-3
914CE1-3A
914CE1-3AK
914CE1-3AKV
914CE1-3G
914CE1-3K
914CE1-6
914CE16-12
914CE16-18
914CE16-18V
914CE16-27
914CE16-3
914CE16-3A
914CE16-3N1
914CE16-6
914CE16-6A
914CE16-6AN14
914CE16-9
914CE16-9A
914CE1-6A
914CE16-AQ
914CE16-AQ2
914CE1-6G
914CE1-6K
914CE1-6L1
914CE16-N53
914CE16-N54
914CE16-N79
914CE16-N82
914CE16-N91
914CE16-Q
914CE16-Q1
914CE16-Q2
914CE16QV
914CE16-QV
914CE16-RH29
914CE16-VCQ1
914CE18-12
914CE18-12AL1
914CE18-15
914CE18-15A
914CE18-21A
914CE1827
914CE18-27
914CE18-3
914CE18-3A
914CE18-3AL1
914CE18-6
914CE18-6A
914CE18-9
914CE18-9A
914CE18-9AGL1
914CE18-9AL1
914CE18-9V
914CE18-AQ
914CE18-AQ1
914CE18-GQ
914CE18-Q
914CE18-Q1
914CE1-9
914CE19-12
914CE19-3
914CE19-6
914CE19-9
914CE19-9A
914CE1-9A
914CE1-AKQ
914CE1-AKQ1
914CE1-AQ
914CE1-AQ1
914CE1-GQ1
914CE1-KQ
914CE1-KQ1
914CE1-N94
914CE1-Q
914CE1-Q1
914CE1-Q2
914CE20-12
914CE20-12G
914CE20-12GL1
914CE20-3
914CE20-6
914CE20-9
914CE20-9L1
914CE20-N69
914CE20-N77
914CE20-Q
914CE20-Q1
914CE2-12
914CE2-12AK
914CE2-12GK
914CE2-12GKL1
914CE212GL1
914CE2-12KL1
914CE2-15
914CE2-15A
914CE2-18
914CE2-21
914CE22-12
914CE2-21N36
914CE22-3
914CE2-24K
914CE22-6
914CE2-27
914CE22-9
914CE2-3
914CE2-33
914CE2-33AK
914CE2-33K
914CE2-33N37
914CE2-3A
914CE2-3AK
914CE2-3AL1
914CE2-3G
914CE2-3K
914CE2-3KL1
914CE2-3KV
914CE2-3L1
914CE2-6
914CE2-6A
914CE2-6AK
914CE2-6-C
914CE2-6G
914CE2-6K
914CE2-6KV
914CE27-12
914CE27-3
914CE27-6
914CE27-9
914CE27-AGQ1
914CE27-GQ1
914CE27-Q
914CE28-12
914CE28-18
914CE28-3
914CE28-6
914CE28-9
914CE28-Q
914CE28-Q1
914CE2-9
914CE29-3
914CE29-6
914CE299
914CE29-9
914CE29-9L1
914CE2-9A
914CE2-9AK
914CE2-9AL1
914CE2-9C
914CE2-9G
914CE2-9K
914CE2-9KL1
914CE2-9L1
914CE29Q
914CE2-9Q
914CE29-Q
914CE2-AGQ
914CE2-AKLQ
914CE2-AKQV
914CE2-AQ
914CE2-AQ1
914CE2-KQ
914CE2-KQ1
914CE2-KQV
914CE2-N47
914CE2-N49
914CE2-N50
914CE2-N51
914CE2-N55
914CE2-N57
914CE2-N58
914CE2-N59
914CE2N67
914CE2-N67
914CE2-N71
914CE2-N81
914CE2-N83
914CE2-N85
914CE2-N86
914CE2-N87
914CE2-N88
914CE2-N89
914CE2-N92
914CE2-N95
914CE2-N96
914CE2-Q
914CE2-Q1
914CE2-Q2
914CE31-12
914CE31-12A
914CE31-12AV
914CE31-18
914CE3-12
914CE3-12AK
914CE3-12K
914CE31-3
914CE31-3A
914CE31-3C
914CE31-3L1
914CE31-3V
914CE31-6
914CE31-9AL1
914CE31-9L1
914CE31-9V
914CE31-AQ
914CE31-N52
914CE31-RH09
914CE3-3
914CE3-3A
914CE3-3AK
914CE3-3AL1
914CE3-3G
914CE3-3K
914CE3-3KL1
914CE3-3L1
914CE3-6
914CE3-6A
914CE3-6AK
914CE3-6G
914CE3-6K
914CE3-9
914CE3-9AK
914CE3-9G
914CE3-9K
914CE3-9L1
914CE3-9V
914CE3-AKQ
914CE3-AQ
914CE3-KQ
914CE3-KQ1
914CE3-N93
914CE3-Q
914CE3-Q1
914CE55-12
914CE55-3
914CE553A
914CE55-3A
914CE55-3AG
914CE66-12
914CE66-3
914CE66-6
914CE66-9
13
sensing.honeywell.com
MICRO SWITCH™ Compact Precision Limit Switches
ADDITIONAL INFORMATION
The following associated literature is available on the Web at
sensing.honeywell.com:
Product installation instructions
Product range guide
Product nomenclature tree
Product application-specific information
Limit and enclosed switches application information
Limit and enclosed switches operating characteristics
Limit and enclosed switches reference standards
Limit and enclosed switches typical applications
Product flyer: CE Family Miniature Limit Switches
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s standard
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge those
items it finds defective. The foregoing is buyer’s sole remedy
and is in lieu of all other warranties, expressed or implied,
including those of merchantability and fitness for a particu-
lar purpose. In no event shall Honeywell be liable for conse-
quential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell website, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
002381-3-EN IL50 GLO
December 2013
Copyright © 2013 Honeywell International Inc. All rights reserved.
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For application
assistance, current specifications,
pricing or name of the nearest
Authorized Distributor, contact
your local sales office.
To learn more about Honeywell’s
sensing and control products,
call +1-815-235-6847 or
1-800-537-6945,
visit sensing.honeywell.com,
or e-mail inquiries to
info.sc@honeywell.com