2SC4548E-TD-E - ON Semiconductor L.L.C.

83098HA (KT)/7219YT, TS No.3188-1/4

SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft’s

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

PNP Epitaxial Planar Silicon Transistor

NPN Triple Diffuesd Planar Silicon Transistor

High-Voltage Driver Applications

Ordering number:EN3188

2SA1740/2SC4548

( ) : 2SA1740

Specifications

Absolute Maximum Ratings at Ta = 25˚C

Electrical Characteristics at Ta = 25˚C

Package Dimensions

unit:mm

2038 [2SA1740/2SC4548]

Features

· High breakdown votlage.

· Adoption of MBIT process.

· Excellent hFE linearlity.

E : Emitter

C : Collector

B : Base

SANYO : PCP

(Bottom view)

retemaraPlobmySsnoitidnoCsgnitaRtinU

egatloVesaB-ot-rotcelloCV

OBC 004)–(V

egatloVrettimE-ot-rotcelloCV

OEC 004)–(V

egatloVesaB-ot-rettimEV

OBE 5)–(V

tnerruCrotcelloCI

C002)–(Am

)esluP(tnerruCrotcelloCI

PC 004)–(Am

noitapissiDrotcelloCP

C3.1W

erutarepmeTnoitcnuJjT 051

erutarepmeTegarotSgtsT 051+ot55–

Mounted on ceramic board (250mm2×0.8mm)

˚C

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

tnerruCffotuCrotcelloCI

OBC VBC I,V003)–(= E0=1.0)–(Aµ

tnerruCffotuCrettimEI

OBE VBE I,V4)–(= C0=1.0)–(Aµ

niaGtnerruCCD hEF VEC I,V01)–(= CAm05)–(= *06*002

tcudorPhtdiwdnaB-niaGf

TVEC I,V03)–(= CAm01)–(= 07zHM

ecnaticapaCtuptuOC

bo VBC zHM1=f,V03)–(=4)5(Fp

ecnaticapaCrefsnarTesreveRC

er VBC zHM1=f,V03)–(=3)4(Fp

egatloVnoitarutaSrettimE-ot-rotcelloCV

)tas(EC ICI,Am05)–(= BAm5)–(= 8.0)–(V

6.0V

No.3188-2/4

2SA1740/2SC4548

* The 2SA1740/2SC4548 are classified by 50mA hFE as follows :

Unit (resistance : Ω, capacitance : F)

021D06002E001

Switching Time Test Circuit

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

egatloVnoitarutaSrettimE-ot-esaBV

)tas(EB ICI,Am05)–(= BAm5)–(=0.1)–(V

egatloVnwodkaerBesaB-ot-rotcelloCV

OBC)RB( ICI,Aµ01)–(= E0=004)–(V

egatloVnwodkaerBrettimE-ot-rotcelloC(VOEC)RB ICR,Am1)–(= EB =∞004)–(V

egatloVnwodkaerBesaB-ot-retiimEV

OBE)RB( IEI,Aµ01)–(= C0=5)–(V

emiTNO-nruTt

no tiucriCtseTdeificepseeS52.0sµ

emiTFFO-nruTt

ffo tiucriCtseTdeificepseeS0.5sµ

Marking 2SA1740 : AK

2SC4548 : CN

hFE rank : D, E

No.3188-3/4

2SA1740/2SC4548

PS No.3188-4/4

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer’s

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer’s products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any and all SANYO products described or contained herein fall under strategic

products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of

Japan, such products must not be exported without obtaining export license from the Ministry of

International Trade and Industry in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of August, 1998. Specifications and information herein are subject to

change without notice.

2SA1740/2SC4548