HA17L431ALP-E - Renesas Electronics

To our custo mers,

Old Company Name in Catalogs and Other Documents

On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology

Corporation, and Renesas Electronics Corpor ation took over all the business of both

companies. Therefore, althoug h the old com pany name remains in this docum ent, it is a valid

Renesas Electronics document. W e appreciate your understanding.

Renesas Electronics website: http://www.renesas.com

April 1st, 2010

Renesas Electronics Corporation

Issued by: Renesas Electronics Corporation (http://www.renesas.com)

Send any inquiries to http://www.renesas.com/inquiry.

Notice

1. All information included in this document is current as of the date this document is issued. Such information, however, is

subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please

confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to

additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.

2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights

of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.

No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights

of Renesas Electronics or others.

3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.

4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of

semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,

and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by

you or third parties arising from the use of these circuits, software, or information.

5. When exporting the products or technology described in this document, you should comply with the applicable export control

laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas

Electronics products or the technology described in this document for any purpose relating to military applications or use by

the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and

technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited

under any applicable domestic or foreign laws or regulations.

6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics

does not warrant that such information is error free. Ren esas E lectronics assumes no liability whatsoever for any da mages

incurred by you resulting from errors in or omissions from the information included herein.

7. Renesas Electronics products are classified acco rding to the following three quality grades: “Standard”, “High Quality”, and

“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as

indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular

application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior

written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for

which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way

liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an

application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written

consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise

expressly specified in a Renesas Electronics data sheets or data books, et c.

“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual

equipment; home electro nic app liances; machine tool s; p ersonal electron ic equipment; and indu strial robots .

“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-

crime systems; safety equipment; and medical equipment not specifically designed for life support.

“Specific”: Aircraft; aerospace equ i pment; submersible repeaters; nu clear reactor control systems; medical equipment or

systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare

interven tion (e.g. excision, et c.), and any oth er applications or purposes that pose a direct th reat to human life.

8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,

especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation

characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or

damages arising out of the use of Renesas Electronics products beyond such specified ranges.

9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have

specific chara cterist ics such as the o ccurren ce of failure at a certai n rate an d malfunct ion s under certai n u se cond ition s. Further,

Renesas Electronics pr oducts are not subject to radiation resi stance design. Please be sure to implement safety measures to

guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a

Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire

control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because

the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system

manufactured by you.

10. Please contact a Renesas Electronics sales office for det ai ls as to enviro nmental matters such as the en vi ronmental

compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable

laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS

Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with

applicable laws and regulations.

11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas

Electronics.

12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this

document or Renesas Electronics products, or if you have any other inquiries.

(Note 1) “Renesas Electronics” as us ed in this document means Renesas Electronics Corporation and also includes its majo ri ty-

owned subsidiaries.

(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.

Rev.6.00 Jun 15, 2005 page 1 of 9

HA17L431/HA17L431A Series

Shunt Regulator REJ03D0691-0600

(Previous : AD E- 204-0 29 E)

Rev.6.00

Jun 15, 2005

Description

The HA17L431 series and the HA17L431A series are temperature-compensated variable shunt regulators. These ICs

can operate at about half voltage in comparison with HA17431 series. They can be replaced for simple Zener diode and

they can also be used for switching power supply secondary-side error amplification circuit.

Features

• On-chip high-precision reference voltage source : 1.240 V ± 1.0% at Ta = 25°C (HA17L431A)

: 1.240 V ± 1.5% at Ta = 25°C (HA17L431)

• Small reference voltage temperature coefficient: 30 ppm/°C Typ

• Maximum catho de vo ltage: 16 V

• Maximum cathode current: 50 mA

• Minimum cathode current: 200 µA Typ

• Operating temperature range: −20 to +85°C

Block Diagram

−

REF

1.240 V

Application Circuit Example

Vout

−

REF R2

HA17L431/HA17L431A GND

Switching Power Supply Secondary-Side

Error Amplification Circuit

HA17L431/HA17L4 31A Series

Rev.6.00 Jun 15, 2005 page 2 of 9

Product Lineup

Reference voltage (at 25°C)

Item

Normal Version

±±

±1.5%

1.222V to 1.258V

to 1.240V

A Version

±±

±1.0%

1.227V to 1.253V

to 1.240V

Package Code

(Previous Code)

Operating

Temperature

Range

HA17L431LP O PLSP0005ZB-A (MPAK-5V)

HA17L431ALP O

HA17L431P O PRSS0003DA-A (TO-92V)

HA17L431AP O

HA17L431UP O PLZZ0004CA-A (UPAKV)

HA17L432UP O

HA17L431ALTP O PLSP0003ZB-A (MPAKV)

Industrial use

HA17L432ALTP O

–20 to +85°C

Pin Arrangement

UPAKV

(HA17L431UP)

REF

UPAKV

(HA17L432UP)

AREF

MPAK-5V

(HA17L431LP/ALP)

NC KNC

REF

MPAKV

(HA17L431ALTP)

KREF

123

123 123

REFK

MPAKV

(HA17L432ALTP)

AKREF

Mark side

TO-92V

(HA17L431P/AP)

HA17L431/HA17L4 31A Series

Rev.6.00 Jun 15, 2005 page 3 of 9

Absolute Maximum Ratings

(Ta = 25°C)

Rated Value

Item

Symbol HA17L431LP/

HA17L431ALP HA17L431P/

HA17L431AP HA17L431UP/

HA17L432UP HA17L431ALTP/

HA17L432ALTP

Unit

Note

Cathode voltage VKA 16 16 16 16 V 1

Continuous

cathode current IK −30 to +50 −30 to +50 −30 to +50 −30 to +50 mA

Reference input

current Iref −0.05 to +5 −0.05 to +5 −0.05 to +5 −0.05 to +5 mA

Power dissipation PT 150 500 800 150 mW 2

Operating

temperature Topr −20 to +85 −20 to +85 −20 to +85 −20 to +85 °C

Storage

temperature Tstg −55 to +150 −55 to +150 −55 to +150 −55 to +150 °C

Notes: 1. The anode pin is used as the reference for voltage values.

2. These values apply when Ta ≤ 25°C. If Ta ≥ 25°C, derate by below figure.

−20 0 50

75 85

25 150

0.6

0.5 0.5W

0.4

Power dissipation PT (W)

Ambient temperature Ta (°C)

(1)

(2)

0.3

0.26

0.2

0.1 0.15W −1.2mW/°C

0.078

−4mW/°C

−20 0 50

75 85

25 150

1.2

1.0

0.8W

0.8

Power dissipation PT (W)

Ambient temperature Ta (°C)

(1): HA17L431P/AP

(2): HA17L431LP/ALP/ALTP/432ALTP HA17L431UP/432UP

(1): With 15mm × 25mm × 0.7mm

alumina ceramic board

(2): Without printed circuit board

(1)

(2)

0.6

0.416

0.4

0.2 0.385W

−3.08mW/°C

−6.4mW/°C

HA17L431/HA17L4 31A Series

Rev.6.00 Jun 15, 2005 page 4 of 9

Electrical Characteristics

(Ta = 25°C, IK = 10 mA)

Item Symbol Min Typ Max Unit Test Condition Remark

1.222 1.240 1.258 HA17L431 Reference voltage Vref 1.227 1.240 1.253 V VKA = Vref HA17L431A

Reference voltage

deviation Vref(dev)  5  mV VKA = Vref,

Ta = −20°C to +85°C *1

Reference voltage

temperature coefficient ∆Vref/∆Ta  ±30  ppm/°C VKA = Vref,

0°C to 50°C gradient

Reference voltage

regulation ∆Vref/∆VKA  1.0 2.0 mV/V VKA = Vref to 16V

Reference input current Iref  2 6 µA R1 = 10 kΩ, R2 = ∞

Reference current

temperature deviation Iref(dev)  0.5  µA R1 = 10 kΩ, R2 = ∞,

Ta = −20°C to +85°C

Minimum cath ode curre nt Imin  0.2 1.0 mA VKA = Vref *2

Off cathode current Ioff  0.001 1.0 µA VKA = 16 V, Vref = 0 V

Dynamic im ped anc e ZKA  0.2 0.5 Ω V

KA = Vref,

IK = 1 mA to 50 mA

Notes: 1. Vref(dev) = (Vref maximum value at Ta = −20°C to +85°C) − (Vref minimum value at Ta = −20°C to +85°C)

Vref(dev)

−20 +85

Ta (°C)

2. Definition of minimum cath ode current.

Imin is the cathode current value at which Vref = Vref(IK = 10 mA) − 15 mV.

HA17L431/HA17L4 31A Series

Rev.6.00 Jun 15, 2005 page 5 of 9

MPAK-5V(5-pin), MPAKV(3-pin ) and UPAKV Marking Patterns

The marking patterns shown below are used on MPAK-5V, MPAKV and UPAKV products. Note that the product code

and mark pattern are different. The pattern is laser-printed.

HA17L431LP HA17L431ALTP HA17L431UP HA17L432UP

HA17L432ALTP

(b)

(2)

(c)

(4)(1)

(a)

A REF

NC NC K

HA17L431ALP

(b)

(2)

(c)

(4)(1)

(a)

A REF

NC NC K

(b)

(2)

(c)

(4)(1)

(a)

REF K

(b)

(2)

(c)

(4)(1)

(a)

KREF

(3) (4)

(1) (2)

(5)

REF

(3) (4)

(1) (2)

(5)

Band mark Band mark

Notes: 1. Boxes (1) to (5) in the figures show the position of the letters or numerals, and are not actually marked on the

package.

2. The letters (1) and (2) show the product specific mark pattern.

Product (1) (2)

HA17L431LP 4 L

HA17L431ALP 4 M

HA17L431ALTP 3 E

HA17L432ALTP 3 F

HA17L431UP 4 D

HA17L432UP 4 E

3. The letter (3) shows the production year code (the last digit of the year) for UPAKV products.

4. The bars (a), (b) and (c) show a production year code for MPAK-5V and MPAKV products as shown below.

After 2010 the code is repeated every 8 years.

Year 2002 2003 2004 2005 2006 2007 2008 2009

(a) None None None Bar Bar Bar Bar None

(b) None Bar Bar None None Bar Bar None

5. The letter (4) shows the production month code (see table below).

Production month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct. Nov. Dec.

Marked code A B C D E F G H J K L M

6. The letter (5) shows manufacturing code. For UPAKV products.

HA17L431/HA17L4 31A Series

Rev.6.00 Jun 15, 2005 page 6 of 9

Characteristic Curves

1.260

1.250

1.230

1.220

−20 0 20 40 60 80 85

1.0

0.5

00 0.5 1 1.5 2.0 2.5

1.240

500mV/DIV

REF K

Vref

−30

−50 5

1V/DIV

100 1k 100k 1M 10M

180

−180

10k

∅Vo

4.3kΩ

10µF

G = 20log Vo

Vi (dB)

GVOL

VK = Vref

IK = 10mA

IKV

REF K

IK = 10mA

VK = Vref VK = Vref

220Ω

6.8kΩ

−+

Ambient Temperature Ta (°C)

Reference Voltage Vref (V)

Temperature Characteristics of Reference Voltage

Catode Voltage VK (V)

Catode Current IK (mA)

Catode Current vs. Catode Voltage1

Catode Voltage VK (V)

Catode Current IK (mA)

Catode Current vs. Catode Voltage2

Frequency f (Hz)

Open Loop Voltage Gain GVOL (dB)

Open Loop Voltage Gain, Phase vs. Frequency Characteristics

Phase ∅ (degree)

HA17L431/HA17L4 31A Series

Rev.6.00 Jun 15, 2005 page 7 of 9

Noise Recovery Characteristics of HA17L431A and H A17L431

The HA17L431A bettered VKA and Vref recovery time against the HA17L431 when it was inputted noise.

15 V 220 pF

(External)

12 kΩ

Input pulse

1 V

680 Ω7.5 kΩ

220 µF

4.7 kΩ

0.1 µF

0 V

50 ms

(Cathode)

(Anode)

Shunt

Regulators

(REF)

Pulse

generator

VKA

Vref

Vout

Figure 1 Noise Response Characteristics Measurement Circuit

Trig?Tek Run: 25.0MS/s Sample

Ch1

Ch3 500mV

1.00 V Ch2 Ch2 2.46 V1.00 V M 2.00µs

[⋅⋅⋅⋅⋅T⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅]

Trig?Tek Run: 25.0MS/s Sample

Ch1

Ch3 500mV

1.00 V Ch2 Ch2 2.46 V1.00 V M 2.00µs

[⋅⋅⋅⋅⋅T⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅]

Waveform of HA17L431A Waveform of HA17L431

Input Noise

Vref

Input Noise

Vref

Figure 2 Noise Recovery Characteristics

HA17L431/HA17L4 31A Series

Rev.6.00 Jun 15, 2005 page 8 of 9

Package Dimensions

AA b

xSA

Pattern of terminal position areas

1.0

0.35

0.1

2.8

1.5

2.5

0.3

0.1

0.2

Min Nom

Dimension in Millimeters

Reference

Symbol

Max

1.1

0.25

0.42

0.4

0.13

0.11

2.95

1.6

0.95

2.8

2.15

0.3

1.3

0.1

1.2

0.5

0.15

3.1

1.8

3.0

0.7

0.5

0.6

0.05

0.55

0.85

SC-74A 0.015g

MASS[Typ.]

MPAK-5 / MPAK-5VPLSP0005ZB-A

RENESAS CodeJEITA Package Code Previous Code

A-A Section

AA b

xSA

EHE

A1S

A-A Section

b1c1

LL1LP

Pattern of terminal position areas

1.0

0.35

0.1

2.7

1.35

2.2

0.35

0.15

0.25

Min Nom

Dimension in Millimeters

Reference

Symbol

Max

1.1

0.25

0.42

0.4

0.13

0.11

1.5

0.95

2.8

1.95

0.3

1.3

0.1

1.2

0.5

0.15

3.1

1.65

3.0

0.75

0.55

0.65

0.05

0.55

1.05

SC-59A 0.011g

MASS[Typ.]

MPAK(T) / MPAK(T)V,

MPAK / MPAKV

PLSP0003ZB-A

RENESAS CodeJEITA Package Code Previous Code

HA17L431/HA17L4 31A Series

Rev.6.00 Jun 15, 2005 page 9 of 9

4.5 ± 0.1

1.8 Max 1.5 ± 0.1

0.44 Max

0.48 Max

0.53 Max

1.5 1.5

3.0

2.5 ± 0.1

4.25 Max

0.8 Min

φ1

0.4

(1.5)

(2.5)

(0.4)

(0.2)

Previous Code

PLZZ0004CA-A UPAK / UPAKV

MASS[Typ.]

0.050g

SC-62

RENESAS CodeJEITA Package Code

Unit: mm

0.60 Max

0.55 Max

4.8 ± 0.3 3.8 ± 0.3

5.0 ± 0.2

0.7 2.3 Max

12.7 Min

0.5 Max

1.27

2.54

Previous Code

PRSS0003DA-A TO-92(1) / TO-92(1)V

MASS[Typ.]

0.25gSC-43A

RENESAS CodeJEITA Package Code

Unit: mm

Keep safety first in your circuit designs!

1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble

may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.

Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits,

(ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.

Notes regarding these materials

1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's

application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.

2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,

diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.

3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of

publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is

therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product

information before purchasing a product listed herein.

The information described here may contain technical inaccuracies or typographical errors.

Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.

Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor

home page (http://www.renesas.com).

4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to

evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes

no responsibility for any damage, liability or other loss resulting from the information contained herein.

5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life

is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a

product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater

use.

6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.

7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and

cannot be imported into a country other than the approved destination.

Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.

8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.

Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan

http://www.renesas.com

Refer to "http://www.renesas.com/en/network" for the latest and detailed information.

Renesas Technology America, Inc.

450 Holger Way, San Jose, CA 95134-1368, U.S.A

Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501

Renesas Technology Europe Limited

Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.

Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900

Renesas Technology Hong Kong Ltd.

7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong

Tel: <852> 2265-6688, Fax: <852> 2730-6071

Renesas Technology Taiwan Co., Ltd.

10th Floor, No.99, Fushing North Road, Taipei, Taiwan

Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999

Renesas Technology (Shanghai) Co., Ltd.

Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China

Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952

Renesas Technology Singapore Pte. Ltd.

1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632

Tel: <65> 6213-0200, Fax: <65> 6278-8001

RENESAS SALES OFFICES

Colophon 2.0