Bazaar Propagate Wiki Login | Sign up
Feedback & Ideas｜Help
Bazaar / Grove / Input / Grove - Thumb Joystick
Fusion Community
Category
Search for products, brands and platforms
Qty：
ADD TO CART
Grove - Thumb Joystick
SKU 101020028
Grove Compatible
5V/3.3V Compatible
Analog Output
IN STOCK 18 Available
1
Recipes
Documents
Wiki
Grove
RaspberryPi Instructions
Grove Analog Twig
Arduino Instructions
Recommendations
Description
Grove - Thumb Joystick is a Grove compatible module which is very similar to the 'analog' joystick on PS2
(PlayStation 2) controllers. Two direction movements will output different analog signals as they are actually two
potentiometers. The resistor is ~10k for each.
The joystick also has a push button that can be used for special applications. When the module is in working
mode, it outputs two analog values representing two directions. The value is restricted in a smaller range (e.g
200~700)compared to the normal joystick that is around 1023 when the button is pushed, so that the MCU can
detect the action of pressing.
Features
Grove Compatible, with 4pin universe 2.0mm connector
5V/3.3V Compatible
Analog Output(Maximal value will be got when the button is pushed)
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read
through Preface - Getting Started and Introduction to Grove before your using of the product.
Documents
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the
documents, add more demo code or tutorials. For technical support, please post your questions to our forum.
0
Cheryl Hrynkiw on Oct 19,2016
Hard to mount, with the plug on the topside. Needs side / bottom jack for better connecting. Other than that, it's
pretty nice.
Questions and Answers
Have a question about this? Ask people who own it.
Reply
Base Shield V2
Grove - Ultrasonic Ranger
Grove - Relay
Grove - Slide Potentiometer
Grove - 4-Digit Display
Grove - PIR Motion Sensor
Grove - I2C Hub
Grove - Universal 4 Pin
20cm...
Grove - OLED Display 0.96"
Grove - Universal 4 Pin
Buckled 20cm...
DIY Snake Game
USD
email address
>
Copyright © 2008-2017 Seeed Development Limited All rights reserved Select Language ▼
Select Language ▼
POPULAR SEARCHES
PCB Manufacturing PCB Stencil Arduino XBee Arduino Shield Beaglebone Black Raspberry Pi Raspberry Pi Touchscreen Linkit Cubieboard Beaglebone Cape
FPGA LinkIt ONE Crazyflie 2.0 Raspberry Pi 3 Model B RF Explorer DSO Nano v3 MediaTek X20 HiKey Board rplidar raspberry pi relay RPLIDAR A2
Seeed Info
Reach Us
Distributors
Designers
Careers
Site Map
Customer Service
Contact Us
Customer Support
Technical Support
Terms and Conditions
Order Information
Shipping Information
Payment Information
Warranty and Return
Terms of use
Privacy Policy
Stay Tuned
Subscribe to get the latest product releases, activities
and tutorials from Seeed Studio.
View History
0
on Oct 19,2016
What port do you put this on the base shield v1.3?
0
Steve Chang on Oct 19,2016
When the module is in working mode it will output two analog values representing two directions. The value is
restricted in a little smaller range (e.g 200~700)compared to the normal joystick, while it is around 1023 when
the button is pushed, so that
0
ThatHydeKid on Oct 19,2016
How do the three signals from the joy stick get communicated back via the 2 data signal twig garden connector?
upvote (0)
Reply
upvote (0)
Reply
upvote (0)
Reply
upvote (0)
Grove - 4 pin Female Jumper
to Grove...
Grove - Universal 4 Pin
Buckled 50cm...
Grove - I2C Motor Driver
Grove - Buzzer
Grove - Temperature &
Humidity...
Grove - Screw Terminal
Grove - Universal 4 pin
connector
Grove - RTC
Grove - Moisture Sensor
Grove - Water Sensor
SHIPPING INFORMATION KNOWLEDGE BASE HELP CENTER
Grove - Temperature &
Humidity Sensor
ADD TO CART
Grove - Water Sensor
ADD TO CART
Grove - Sound Sensor
ADD TO CART
Grove - RTC
ADD TO CART
Grove - Button
ADD TO CART
Contact SupportContact Support
