Thick Film Chip Resistor Arrays Thick Film Chip Resistor Networks (Lead-Free for CN12 Series) Document No. TCN-120X001C Revise Date 2011/05/03 page number 1/9 1. Scope : This specification applies for the CN12 series of thick film chip resistor arrays made by TA-I. 2. Construction , Dimensions , Schematic : 2.1 Construction : Conductor: Over Coat (Lead-free or with lead) Resistive Element Plating Ni + Sn Ceramic Substrate 2.1.1 Chip Resistor Arrays : CN12 2.2 Dimension : UNIT:mm Type CN12 L W t P a b c 0.82 0.1 0.57 0.1 0.35 0.1 0.47 0.1 0.33 0.1 0.15 0.1 0.15 0.1 TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistor Arrays Thick Film Chip Resistor Networks (Lead-Free for CN12 Series) Document No. TCN-120X001C Revise Date 2011/05/03 page number 2/9 2.3 Schematic : CN12 3. Type Designation: 3.1 Chip Resistor Arrays CN 12 Product Code size CN : Chip Resistor Array J TN Tolerance 102 Packaging Nominal Power Rating 12 - 0201 *2 Resistance J-5% T- Paper Tape G-2% 3 digits e.g.,: (E-24) 102 = 1K F-1% N : Lead-free 4 digits e.g., : (E-96) 1540 = 154 43R2 = 43.2 Note : TN : Lead-Free products packaged by paper tape TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistor Arrays Thick Film Chip Resistor Networks (Lead-Free for CN12 Series) Document No. TCN-120X001C Revise Date 2011/05/03 page number 3/9 4. Ratings & Characteristics : Type Power Rating at 70 Rating Voltage Max. Working Voltage Max. Over Load Voltage Operating Temp. () Resistance Tolerance (%) Resistance Range () Temp Co-efficient PPM/ CN12 1/32W Refer 4.2 12.5V 25V -55 +125 5% 2% 1% 10~1M 300 0 THICK FILM CHIP RESISTOR ARRAYS Type Rated Current Max Overload Current Resistance Range CN12 0.5 1A Max 50m 4.1 Derating Curve : For resistors operated at ambient temperature over 70 , power rating shall be derated in accordance with figure 1. P max. 100 Power ratio ( % ) 50 0 -55 50 Ambient 70 100 125 Temp. ( C ) Figure 1 4.2 Rated Voltage: The rated voltage is calculated by the following formula: E= P * R E=Rated Voltage(V) P=Rated Power(W) R=Resistance Value() E.G. : What is CN12JTN102 the rated voltage ? CN12JTN102 E= P:1/32W ; R:102 = 1K = 1000 0.031(W) * 1000() = 5.56 (V) TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistor Arrays Thick Film Chip Resistor Networks (Lead-Free for CN12 Series) Document No. TCN-120X001C Revise Date 2011/05/03 page number 4/9 5. Reliability Tests: Test Items Reference standard Condition of Test Temperature Coefficient of Resistance IEC60115-1-4.8 JIS-C5201-4.8 Short Time Overload IEC60115-1-4.13 2.5 X rated voltage for 5 sec JIS-C5201-4.13 Intermittent Overload Load Life -55 +125 Test Limits Refer 4.0 2.5X rated voltage or Max OverloadingVoltage , EC60115-1-4.39 1 sec "ON" 25 sec "OFF" , JIS-C5201-4.39 10000 cycles 1000 hours at rated voltage , IEC60115-1-4.25.1 70 , 1.5hours JIS-C5201-4.25.1 "ON ", 0.5hour "OFF" (2.0%+0.1) 0 : 50 m or less (5.0%+0.1) 0 : 50m or less (3.0%+0.1) 0 :100 m or less 1000 hours at rated voltage , IEC60115-1-4.24 402,90~95% RH JIS-C5201-4.24 1.5hours "ON ", 0.5hour "OFF" (3.0%+0.1) Rapid Change of Temperature IEC60115-1-4.19 -55 (30 min. ) / +155 (30 min. ) JIS-C5201-4.19 5 cycles (3.0%+0.1) 0 :50 m or less Solderability IEC60115-1-4.17 2455 solder, 20.5 sec dwell. JIS-C5201-4.17 Solder : Sn96.5 / Ag3.0 / Cu0.5 At least 95% of surface area of electrode shall be covered with new solder. Load Life with Humidity Core body DielectricWithstanding Voltage (Voltage Proof) IEC60115-1-4.15 Pressure 0.5 kgf a R0.5 pressure rod JIS-C5201-4.15 for 10 sec IEC60115-1-4.7 JIS-C5201-4.7 Applying voltage 100V for 1 minute. IEC60115-1-4.18 270 5 solder , 10 1 sec dwell . Resistance to Solder Heat JIS-C5201-4.18 0 :100 m or less Without mechanical damage such as breaks. Electrical characteristics shall be satisfied No abnormalities such as flashover, burning dielectric breakdown shall appear. (3.0%+0.1) 0: 50m or less Note* : RCWV : Rated continuous working voltage . TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistor Arrays Thick Film Chip Resistor Networks (Lead-Free for CN12 Series) Document No. TCN-120X001C Revise Date 2011/05/03 page number 5/9 6.Marking : No Marking for CN12 7. Taping & Reel : 7.1 Taping Dimensions 7.1.1 2 mm pitch paper UNIT: mm Type A B W CN12 0.70.1 1.00.1 8.00.2 F E P1 P2 P0 2.00.1 2.00.05 D0 T0 +0.1 3.50.05 1.750.1 4.00.1 1.5 0.400.1 -0 Paper Tape Package Type 2 mm pitch 178mm/R CN12 7.2 10000 Reel Specifications UNIT: mm Type A B C CN12 178.0 2.0 60.0 1.0 13.0 1.0 W 9.0 1.0 T 11.5 1.0 TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistor Arrays Thick Film Chip Resistor Networks (Lead-Free for CN12 Series) 7.3 Document No. TCN-120X001C Revise Date 2011/05/03 page number 6/9 Peel off Strength: Peel -off force of paper and blister tape is in accordance with "JIS-C5202" that is , 0.1 to 0.7 N at a peel-off speed of 300 mm / minute. pull 300mm/min top cover tape 1015 standard : 0.10.7N carrier tape 8. Label 8.1 Manufacture Label : 8.1.1 Chip Resistor Array Date Code Resistance Tolerance Type QTY: 10000 PCS Lot No: 63120320K- 0631 102 CN12JT 8.2. Customer Label ( By customer request ): 8.2.1 Chip Resistor Array TA-I Product Spec Customer No 0201 TECH 4P2R J Lead-Free Product LEAD FREE 5% 1K 21-283-621004 CN12JTN102 07.06.11 Date TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistor Arrays Thick Film Chip Resistor Networks (Lead-Free for CN12 Series) Document No. TCN-120X001C Revise Date 2011/05/03 page number 7/9 9. Recommended land patterns 12012041 Dimension Land pattern Type CN Size 12 ( mm ) a b c p f 0.3 0.3 0.3 0.5 0.9 10. Recommend IR - Reflow profile : (solder : Sn96.5 / Ag3 / Cu0.5) Peak : 250 5 0 , 5 sec Pre - heat Zone : 150 to 180 , 90 30 sec Soldering Zone : 230 or higher , 30 10 sec TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistor Arrays Thick Film Chip Resistor Networks Document No. TCN-120X001C Revise Date 2011/05/03 page number 8/9 (Lead-Free for CN12 Series) 11. Storage Conditions: Temperature : 5 to 35 Related Humidity :40 to 75% RH 12. Shelf Life : 2 Years from manufacturing date. 13. ECN : Engineering Change Notice: The customer will be informed with ECN if there is significant modification on the characteristics and materials described in Approval Sheet. 14. Manufacturing Country & City : TA-I TECHNOLOGY CO., LTD. ( Taiwan- Tao Yuan ) Tel: 886-3-3246169 Fax : 886-3-3246167 Associated companies : (1) FORTUNE TASK RESISTOR FACTORY ( China - Dongguan ) Tel : 86-769-8339-47903 Fax : 86-769-8339-4794 (2) TA-I TECHNOLOGY (DONGGUAN ) CO., LTD. ( China -Dongguan ) Tel : 86-769-8339-47903 Fax : 86-769-8339-4794 (3) TA-I TECHNOLOGY ( SU ZHOU ) CO., LTD. ( China - Su Zhou) Tel :86- 512-63457879 Fax : 86-512-63457869 (4) TAI OHM ELECTRONICS ( M ) SDN. BHD. ( Malaysia - Pulaupinang ) Tel :604- 3900480 Fax : 604-3901481 (5) P.T.TAI ELECTRONICS Indonesia ( Indonesia - Jakarta ) Tel :002-62-21-44820254 Fax : 002-62-21-44820256 TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistor Arrays Thick Film Chip Resistor Networks (Lead-Free for CN12 Series) Document No. TCN-120X001C Revise Date 2011/05/03 page number 9/9 Revise record Date Sep. 11. 2007 Content 2.2 Dimension : Owner Vincent " P " change from 0.480.1 to 0.470.1 May 03 .2011 Reliability test : Reference standard from JIS-5202 change to IEC60115 & JIS-C5201 Kate TA-I TECHNOLOGY CO., LTD