SPACERS SPACER, THREADED, HEX Stainless Steel per ASTM A314/A581/A582 STANDOFFS THRUHOLE, ROUND STANDOFFS, THRU HOLE, ROUND = 4-40 6-32 8-32 t/4 () asp L THREAD THREAD THREAD 1 66 En) ef eee He Js : 250 4358-9404 4358-9604 435S-9804 rap a = 312 4358-9405 4358-9605 435S-9805 375 4358-9406 4358-9606 435S-9806 437 4358-9407 4358-9607 4358-9807 7 500 4358-9408 4358-9608 4358-9808 a0. 159 625 4358-9410 4358-9610 4358-9810 +0 002 | 750 4358-9412 4358-9612 4358-9812 =U, l 875 4358-9414 4358-9614 4358-9814 1.000 4358-9416 435S-9616 435S-9816 {| 1.250 4358-9420 435S-9620 435S-9820 20. 129 1.500 4358-9424 4358-9624 4358-9824 2.000 4358-9432 4358-9632 435$-9832 Hop t . nm " 5 = W) 4-40 THREAD ON 1/2 AND OVER TAPPED 1/4 EACH END. 6-32 & 8-32 THREAD ON 1" AND OVER TAPPED 3/8" EACH END 5XX-9XXX-02 BRASS PER ASTM B16 GLAZED CERAMIC GRADE L-5, MEETS MIL-1-10 | 6XXA-SXXX-XX_ = ALUMINUM PER ASTM B211 _ -ENGTH = BASIC PART NO. FINISH BOARD THICKNESS H L BRASS ALUMINUM 1/32 125 O75 598-9408 698A-9408 YY Li VSL fd 1/32 188 075 598-9422 698A-9422 " 1/32 250 075 598-9429 698A-9429 OO. D. | : | | | | | YY | | | ; | | | | 1/32 375 075 598-9443 698A-9443 A / Wy a 1/32 500 .075 598-9457 698A-9457 ! LLL MLE: GA, 1/32 625 075 598-9471 698A-947 1 1/32 .f50 075 598-9485 698A-9485 ae LENGTH GF THREAD 1/32 1.000 075 598-9513 698A-9513 | (TYP) Concord No. Length Depthof MIL. Number 1/16 125 105 598-9409 698A-9409 Thread 1/16 188 105 598-9423 698A-9423 500-1008 oe ee 3/ ne wot-ood 1/16 250 105 598-9430 698A-9430 500- 1010 518 1d NE- 553.0 005 1/16 td .105 598-9444 698A-9444 500-1012 { 3/8 Ni-523-W01-008 1/16 625 105 598-9472 698A-9472 500-1013 1-1/4 3/8 NL-523-W01-010 1/16 .750 105 598-9486 698A-9486 900-1014 1-1/2 3/8 NL-523-W01-012 1/16 1.000 .105 598-9514 698A-9514 500-1015 2 3/8 NL-523-W01-016 500-1090 Se ee is ces-wop-c0s 3/32 125 135 = 598-9410 698A-9410 500-1001 4 4 NL523.Wo>.006 3/32 188 135 598-9424 - 698A-9424 500-1023 4-1/4 3/8 NL-523-W02-010 3/32 td .135 598-9445 698A-9445 500-1024 1-1/2 3/8 NL-523-W02-012 3/32 500 135 598-9459 698A-9459 500-1025 2 3/8 NL-523-W02-016 3/32 625 135 598-9473 698A-9473 500-1026 2-1/2 3/8 NL-523-W02-020 3/32 750 135 598-9487 698A-9487 500-1027 3 3/8 NL-523-W02-024 10-32 THREAD 3/4 OD. 3/32 1.000 135 598-9515 698A-9515 500-1030 1 3/8 NL-523-W03-008 500-1032 1-1/2 3/8 NL-523-W03-012 1/8 188 .165 598-9425 698A-9425 500-1033 2 3/8 NL-523-W03-016 1/8 200 .165 598-9432 698A-9432 500-1034 2-1/2 3/8 NL-5273-W03-020 1/8 375 165 598-9446 H9O8A-9446 OO. ae 3 3/8 NL-523-W03-024 1/8 500 165 598-9460 698A-9460 S00- 4 318 NE-S23-WO03-032 1/8 625 165 598-9474 698A-9474 1/4-20 THREAD 1 O.D. 500-1040 1-1/4 7/16 NL-523-W04-010 V8 50 165 098-9488 G9EA-9488 500-1042 2 5/8 NL-523-W04-016 500-1043 9-1/2 5/8 NL-523-W04-020 * FOR BRASS PARTS, ADD -02 SUFFIX TO PART NUMBER 500-1044 3 5/8 NL-523-W04-024 FOR STANDARD NICKEL FINISH | 500-1045 4 5/8 NL-523-W04-032 FOR ALUMINUM PARTS, ADD -17 SUFFIX TO PART NUMBER 900-1046 5 5/8 NL-523-W04-040 FOR STANDARD NON-CHROMATE CLEAR PROTECTIVE COATING OR 500-1047 6 5/8 NL-523-W04-048 -16 FOR YELLOW IRRIDITE FINISH. SWAGING TOOLS TOLERANCE: 2% OF DIMENSION PLUS .012 COMMERCIAL CERAMIC STANDOFFS GRADE L5 GLAZED OUTSIDE ANVIL PUNCH PARTNO. A B THD OC - 500-1050 1/4 1/4. ~=Ss@-32SsTThru TA250-125 TP160-125 500-1051 2 1/4 632 5/32 : PERF 500-1052 3/8 3/8 632 5/32 | WY oe 500-1053 1/2 3/8 S632 NG TA280-250 TP160-125 | asthe fee 500-1054 12 1/2 632 9/64 OE | : | | | | e 500-1055 3/4 1/2 6-32 1/4 TA250-500 TP160-125 WI Mey A 500-1056 11 112 632 3/8 | YY We We A 500-1057 1-1/2, 1/2, B2_sOE eee - 500-1058 2-1/2 1/2 632 1/2 TA2S80-750 TP160-125 oo 500-1059 2-1/2 3/4 1/4-20 3/4 pee Ems 500-1060 4 3/44 114-20 3/4 TOLERANCE: 2% OF DIMENSION PLUS .012 FOR ADDITIONAL SIZES AND MATERIALS, CONTACT FACTORY 800-847-4162 (Outside N.Y.S ) Ph: 212-777-6571 Fax: 212-991-0161 sales@concord-electronics.com engineering@concord-electronics.com 202