DC/DC Converters TES 3WI Series, 3 Watt Features Compact SMD package 33.4 x 18.8 mm footprint Ultra-wide 4:1 input voltage range I/O isolation 1500 VDC Operating temp. range -40C to +71C Short circuit protection Input filter to meet EN 55022, class A Remote On/Off High accuracy of pin co-planarity Qualified for leadfree reflow solder UL 60950-1 process according IPC/JEDEC J-STD-020D Available in tape & reel package 3-year product warranty The TES-3WI series is a family of high performance 3W dc/dc-converter modules in a low profile SMD package with compact dimensions. The 14 modules feature ultrawide 4:1 input ranges with tightly regulated output voltage. High efficiency allows an operating temperature range of -40C to +71C at full load. Further features are built-in EMI-filter to meet EN 55022 class A without external components and remote On/Off control. The products comply with IPC J-STD-020D and are qualified for high temperature lead-free reflow solder process. Models Ordercode Input voltage Output voltage Output current max. Efficiency typ. TES 3-2410WI 3.3 VDC 750 mA 75 % TES 3-2411WI 5 VDC 600 mA 79 % 12 VDC 250 mA 81 % 15 VDC 200 mA 81 % 5 VDC 300 mA 78 % TES 3-2422WI 12 VDC 125 mA 81 % TES 3-2423WI 15 VDC 100 mA 81 % TES 3-4810WI 3.3 VDC 750 mA 76 % TES 3-4811WI 5 VDC 600 mA 80 % 12 VDC 250 mA 83 % 15 VDC 200 mA 83 % TES 3-2412WI TES 3-2413WI TES 3-2421WI TES 3-4812WI TES 3-4813WI TES 3-4821WI 9 - 36 VDC (nominal 24 VDC) 18 - 75 VDC (nominal 48 VDC) 5 VDC 300 mA 80 % TES 3-4822WI 12 VDC 125 mA 83 % TES 3-4823WI 15 VDC 100 mA 83 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TES 3WI Series 3 Watt Input Specifications Input current (no load) 24 V models: 20 mA typ. 48 V models: 10 mA typ. Start-up voltage / under voltage shut down 24 V models: 8.5 VDC / 8 VDC typ. 48 V models: 17 VDC / 16 VDC typ Surge voltage (1 sec. max.) 24 V models: 50 V max. 48 V models: 100 V max. Reverse voltage protection 1.0 A max. Reflected input ripple current 24 V models: 10 mA typ. 48 V models: 5 mA typ. Input filter EN 55022 class A, FCC part 15, level A Output Specifications Voltage set accuracy 1 % Regulation - Input variation Vin min. to Vin max. 0.5 % max. - Load variation 10 - 100 % single output models: 1.0 % max. dual output models balanced load: 2.0 % max. Minimum load 10 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Temperature coefficient 0.02 %/C max. Ripple and noise 50 mVpk-pk max. Transient Response (25% load step change) - Recovery time 500 s max. - Deviation 6 % max. Current limitation >120 % of Iout max. Short circuit protection continuous, automatic recovery Capacitive load Remote On/Off single output models: 3000 F dual output models: 180 F (each output) - On: 2.5 to 5.5 V or open circuit - Off: -0.7 to 0.8 V or short circuit pin 3 and pin 1/2 - Off idle current: 5 mA General Specifications Temperature ranges - Operating -40C to +71C - Case temperature +100C max. - Storage -40C to +125C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at+25C, ground benign) >1`000`000 h Isolation voltage (60 sec.) - Input/Output 1`500 VDC Isolation capacitance - Input/Output 500 pF max. Isolation resistance - Input/Output >1`000 Mohm Switching frequency 300 kHz typ. (frequency modulation PFM) Environmental compliance - Reach www.tracopower.com/info/reach-declaration.pdf - RoHS RoHS Directive 2011/65/EU Supporting documents: www.tracopower.com/overview/tes3wi All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TES 3WI Series 3 Watt Physical Specifications Casing material non conductive plastic (UL 94V-0 rated) Package weight 8.8 g (0.31oz) Lead-free reflow solder process as per J-STD-020D.1 (to find at: www.jedec.org - free registration required) Moisture sensivity level (MSL) level 2 as per J-STD-033B.1 (to find at: www.jedec.org - free registration required) Washing process not recommended. Product non-hermetical. Outline Dimensions 32.3 (1.272) Seating Plane Detail A 10.2 (0.402) S 0.5 (0.02) 14.8 (0.583) 16.1 (0.634) 18.8 (0.740) Pin-Out O1.5 (O 0.06) vent hole on bottom side (for reflow soldering process) 24.6 (0.97) 24 13 10.4 (0.41) Detail A M10:1 1. 0 (0 .0 4) Top View 1 2.16 (0.085) 12 2.54 17.78 (0.7) 1.0 (0.04) (0.1) Solder Pad Dimension 1.3 (0.051) 0.15 (0.006) 0.15 27.94 (1.1) 2.16 (0.1) (0.1) 2.54 2.54 (0.1) (0.1) Single Dual 1 -Vin (GND) -Vin (GND) 2 -Vin (GND) -Vin (GND) 3 Remote On/Off Remote On/Off 10 No con. Common 11 No con. No con. 12 No con. -V Output 13 +V Output +V Output 14 No con. No con. 15 -V Output Common 22 No con. No con. 23 +Vin (Vcc) +Vin (Vcc) 24 +Vin (Vcc) +Vin (Vcc) No con. = Pin to be isolated from circuitry 20.0 (0.79) (0.09) 17.78 (0.7) 2.54 2.54 Pin 2.8 (0.11) 1 Dimensions in [mm], () = Inch Tolerances 0.25 (0.01) Pin pitch tolerances 0.13 (0.005) 1.5 min. (0.06) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. July 13, 2018 Page 3 of 3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: TES 3-4822WI TES 3-2422WI TES 3-2413WI TES 3-2421WI TES 3-4810WI TES 3-4813WI TES 3-2412WI TES 3-4811WI TES 3-2411WI TES 3-2410WI TES 3-2423WI TES 3-4812WI TES 3-4821WI TES 3-4823WI