Product datasheet
Characteristics
TM3AM6G
Modicon TM3 - 4 analog inputs, 2 analog output
(spring) 24Vdc
Main
Range of product Modicon TM3
Product or component type Input/output analog module
Range compatibility Modicon M221
Modicon M241
Modicon M251
Modicon M262
Analogue input number 4
Analogue input type current 4...20 mA
current 0...20 mA
voltage 0...10 V
voltage - 10...10 V
Analogue output number 2
Analogue output type Current: 4...20 mA
Current: 0...20 mA
Voltage: 0...10 V
Voltage: - 10...10 V
Complementary
Analogue input resolution 12 bits
11 bits + sign
Permissible continuous overload 13 V, analogue input type: voltage
40 mA, analogue input type: current
Input impedance <= 50 Ohm current
>= 1 MOhm voltage
Analogue output resolution 12 bits
11 bits + sign
LSB value 2.44 mV 0...10 Vvoltage
4.88 mV - 10...10 Vvoltage
4.88 µA 0...20 mAcurrent
3.91 µA 4...20 mAcurrent
Load type Resistive
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Dec 6, 2020
1
Load impedance ohmic 1 kOhm voltage
300 Ohm current
Stabilisation time 1ms
Conversion time 1 ms + 1 ms per channel + 1 controller cycle time
Sampling duration 1ms
10ms
Absolute accuracy error +/- 1 % of full scale
+/- 0.2 % of full scale at 25°C
Temperature drift +/- 0.01 %FS/°C
Repeat accuracy +/-0.5 %FS for input
+/-0.5 %FS for output
Non-linearity +/- 0.2 %FS
Output ripple 20 mV
Cross talk <= 1 LSB
[Us] rated supply voltage 24 V DC
Supply voltage limits 20.4…28.8V
Type of cable Twisted shielded pairs cable <30m for input/output circuit
Current consumption 45 mA at 5 V DC via bus connector no load
55 mA at 5 V DC via bus connector full load
55 mA at 24 V DC via external supply no load
100 mA at 24 V DC via external supply full load
Local signalling 1 LED (green) for PWR
Electrical connection 10 x 1.5 mm² removable spring terminal block with pitch 3.81 mm adjustment for inputs
10 x 1.5 mm² removable spring terminal block with pitch 3.81 mm adjustment for inputs, outputs and
supply
Insulation Between input and supply at 1500V AC
Between input and internal logic at 500V AC
Between output and supply at 1500V AC
Between output and internal logic at 500V AC
Marking CE
Surge withstand 1kV power supply common mode conforming to EN/IEC 61000-4-5
0.5kV power supply differential mode conforming to EN/IEC 61000-4-5
1kV I/O common mode conforming to EN/IEC 61000-4-5
0.5kV I/O differential mode conforming to EN/IEC 61000-4-5
Mounting support Top hat type TH35-15 rail conforming to IEC 60715
Top hat type TH35-7.5 rail conforming to IEC 60715
plate or panel with fixing kit
Height 90mm
Depth 70mm
Width 23.6mm
Net weight 0.1kg
Environment
Standards EN/IEC 61131-2
EN/IEC 61010-2-201
Resistance to electrostatic discharge 8kV in air conforming to EN/IEC 61000-4-2
4kV on contact conforming to EN/IEC 61000-4-2
Resistance to electromagnetic fields 10V/m 80 MHz...1 GHz conforming to EN/IEC 61000-4-3
3V/m 1.4 GHz...2 GHz conforming to EN/IEC 61000-4-3
1V/m 2 GHz...3 GHz conforming to EN/IEC 61000-4-3
Resistance to magnetic fields 30A/m conforming to EN/IEC 61000-4-8
Resistance to fast transients 1kV (I/O) conforming to EN/IEC 61000-4-4
Resistance to conducted disturbances 10V 0.15...80 MHz conforming to EN/IEC 61000-4-6
3V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification
(LR, ABS, DNV, GL)
Electromagnetic emission Radiated emissions - test level: 40 dBμV/m QP class A ( 10 m) at 30…230MHz conforming to EN/
IEC 55011
Radiated emissions - test level: 47 dBμV/m QP class A ( 10 m) at 230…1000MHz conforming to EN/
IEC 55011
Immunity to microbreaks 10ms
2
Ambient air temperature for operation -10…55°C horizontal installation
-10…35°C vertical installation
Ambient air temperature for storage -25…70°C
Relative humidity 10…95%, without condensation (in operation)
10…95%, without condensation (in storage)
IP degree of protection IP20
Pollution degree 2
Operating altitude 0...2000 m
Storage altitude 0…3000m
Vibration resistance 3.5 mm at 5…8.4Hz on DIN rail
3 gn at 8.4…150Hz on DIN rail
Shock resistance 15 gn for 11ms
Packing Units
Package 1 Weight 195.000g
Package 1 Height 75.000mm
Package 1 width 105.000mm
Package 1 Length 125.000mm
Offer Sustainability
Sustainable offer status Green Premium product
REACh Regulation REACh Declaration
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal free Yes
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Environmental Disclosure Product Environmental Profile
Circularity Profile End of Life Information
WEEE The product must be disposed on European Union markets following specific waste collection and
never end up in rubbish bins
PVC free Yes
Contractual warranty
Warranty 18 months
3
Product datasheet
Dimensions Drawings
TM3AM6G
Dimensions
(*) 8.5 mm/0.33 in when the clamp is pulled out.
4
Product datasheet
Mounting and Clearance
TM3AM6G
Spacing Requirements
5
Product datasheet
Mounting and Clearance
TM3AM6G
Mounting on a Rail
Incorrect Mounting
6
Product datasheet
Mounting and Clearance
TM3AM6G
Mounting on a Panel Surface
(1) Install a mounting strip
Mounting Hole Layout
7
Product datasheet
Connections and Schema
TM3AM6G
Analogue Mixed I/O Module
Wiring Diagram (Current / Voltage)
(*) Type T fuse
(1) Current/Voltage analog output device
(2) Current/Voltage analog input device
8