FEATURES @ LOW COST @ SINGLE-IN-LINE PACKAGE (SIP) @ INTERNAL INPUT AND OUTPUT FILTERING -. @ NON-CONDUCTIVE CASE DESCRIPTION The HPR1XX Series uses advanced circuit design and packaging technology to deliver superior reliability and performance. A .170kHz push-pull oscillator is problems are reduced when using the HPR1XX Series with high frequency isolation amplifiers. , Reduced parts count and high efficiency add to the reliability of the HPR1XX Series. The high efficiency of the HPR1XX Series means less internal power dissipation, as low as 190mW. With reduced heat dissipation the HPR1XX Series can operate at higher temperatures with no degradation. In addition, the ABSOLUTE MAXIMUM RATINGS = = CONVERTIBLES m used in the input stage. Beat-frequency oscillation ~HPRI1 XX SERIES 0.75 WATTS. MnEGu ATED Bente ea MINIATURE SIP, DIP AND SMD PACKAGES | HIGH OUTPUT POWER DENSITY: 10 WATTS/INCH? . @ EXTENDED TEMPERATURE RANGE:- 25C to +85C : @ HIGH EFFICIENCY: to 80% f- - high efficiency of the HPRIXX Series means the series is able to offer greater than 10 W/inch of output power density. Operation down to no load will not ' impact the reliability of the series, although a 1mA minimum load is needed to realize published specifi- cations. The HPR1XX Series provides the user low cost with- . out sacrificing reliability. The use of surface mounted: devices and advanced: manufacturing technologies make it possible to offer premium performance and: low cost. . Internal Power Dissipation 450mW Short Circuit Duration... , Momentary Lead Temperature (soldering, 10 seconds MAX)..........-..sseescescerens +#300C * * NOTE: Refer to Reflow Profile for SMD Models. : : ORDERING INFORMATION HPR_ 1XX V/W /H iw Device Family a a | HPR Indicates DC/DC Converter Model Number. Selected from Table of Electrical Characteristics Package Option There is "no" package designator for the SIP. package V = DIP Package . W = SMD Package Screening Option Me 9006050 00004e9 975ELECTRICAL SPECIFICATIONS | Specifications typical at T, = +25C, nominal input voltage, rated output current unless otherwise specified. NOMINAL RATED RATED INPUT CURRENT REFLECTED INPUT OUTPUT OUTPUT - RIPPLE VOLTAGE VOLTAGE CURRENT MIN LOAD | RATED LOAD CURRENT EFFICIENCY MODEL (vDC) (VDC) (mA) (mA) (mA) (mAp-p) (%) HPR100 5 5 150 20 216 10 69 HPR101 5 12 62 20 200 5 73 HPR102 5 15 50 20 199 5 75 HPR103 _5 +5 +75 20 208 5 70 HPR104 5 +12 +30 20 192 5 78 HPR105 5 +15 25 20 190 5 79 HPR106 12 5 . 150 10 90 5 69 HPR107 12 12 . 62 10 81 5 77 HPR108 12 15 50 10 78 5 80 HPR109 12 +5 : +75 10 87 5 72 HPR110 t2 12 +30 10 78 5 80 HPR111 12 15 7225 10 78 5 80 HPR112 15 5 150 8 72 5 69. HPR113 15 12 62 8 67 5 75 HPR114 15 + 15 50 8. 63 5 80 HPR115 15 5 75 8 68 5 73 HPR116 18 #12 +30 & 63 5 80 HPR117 15 215 +25 8 63 5 80 HPR118 24 5 : 150 8 44 15 70 HPR119 24 12 : 62 8. 42 15 - 74 HPR120 24 15 " 50 8 41 15 76 HPR121 24 +5 +75 8 41 15 76 HPR122 24 +12 ~ P+ #30 8 40 15 78 HPR123 - 24 215 . +25 8 40 15 79 Note: Other Input to output voltages may be available. Please contact factory. COMMON SPECIFICATIONS Specifications typical at T, = +25C, nominal input voltage, rated output current unless otherwise specified. Parameter Conditions Nin Typ Max Units INPUT . Voltage Range 45 5 5.5 VDG 10.8 12 13.2 - VDC 13.5 15 16.5 VDC 21.6 24 26.4 vbDc Voltage Rise Time See Typical Performance Curves & Application Notes: "Capacitive Loading Effects on Start-Up of DC/DC Converters" ISOLATION Rated Voltage 750 VDC Test Voltage 60 Hz, 10 Seconds 750 Vpk Resistance : 10 GQ Capacitance 25 100 pF Lakage Current Vigo= 240VAC, 6OHz 2 8.5 pArms OUTPUT Rated Power 750 mw Voltage Setpoint Accuracy Rated Load, Nominal V,, +5 % Ripple & Noise BW = DC to 10MHz 45 mVp-p BW =10Hz to 2MHz 30 mVrms HPR103 BW = DC to 10MHz 90 mVp-p Voltage 1mA Load, V,,,,= 5V 7 . VDC 1mA Load, V,,, = 12V 15 VDC 1mA Load, V,,, = 15V 18 VDC Temperature Coefficent .01 %/Deg-C REGULATION Line Regulation High Line to Low Line 1 Bl%Vin | Load Regulation (5V out only) Rated Load to 1mA Load 10 % Load Regulation (All other Models) Rated Load to 1mA Load 3 % GENERAL Switching Frequency 170 kHz Fraquency Change Over Line and Load 24 % Package Weight * 2 9g MTTF per MIL-HDBK-217, Rev. E Circuit Stress Method Ground Benign T,= +25C 7.9 MHr Fixed Ground T,= +35C 1.9 MHr Navat Sheltered T,= 495C 12 MHr Airborne Uninhabited Fighter T,= +35C 300 kHr TEMPERATURE Specification 25 +25 +85 a} Operation -40 +100 C Storage -40 +110 C * For demonstrated MTTF results reference Power Convertibles Reliability Report HPR105 MB 9006050 0000430 97MECHANICAL SiP" Package/Pinout FRONT 0.77 jez 20070 _ O10" (19. [$f al 0.240 + 0.010" (6.09+0.25) j++ VIEW : RIGHT 0.400+0.010" SIDE (10.1640. (10.1640.25) VIEW 0.020 2.010" _ 1 *5}| 6 / (0.5140.25) | foe. MIN 0.01 40.002" : 0. sl 015 1-388 56) (0.25+0.05) (0.5120.05) (4.5720.38) 40.035 40,015" - *. | PIN CONNECTIONS (0.8940.38) BOTTOM F | aaVIN 2, -VIN VIEW 4. -vouT 5. com i o 6 9 : 6. VOUT * Common pin not present on single output models. Notes: All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) PINPLACEMENT TOLERANCE: +0.015" Marked with: specific model ordered, date code, job code. MATERIAL: Units are encapsulated in Iso- ThermoFlex, a low thermal resistance molding compound which has excellent chemical resis- tance, wide operating temperature range, and good electrical properties under high humidity environ- ments. The encapsulant and outer shell of the unit have UL94V-O ratings. Lead materialis phosphor bronze with a solder plated surface to allow ease of solderability. : MECHANICAL Package/Pinout "V" and "W" DIP PACKAGE 0.785+0.010" (19.9420.25) 1413 11109 8 pn a 0.52540.610" : | 9.695+0.015" (13.342:0.25) HPRIXXV (17.65+0.38) n TTT rt 1234567 0.37530.005" t (9.5240.13) Jy : 0.01530.005" 0.020+0.002" (0.38+0.13) 16.5120.08) 0.100+0.010" (2.54+0.25) . 0.125+0.030" 0-15 -0.000" Gs 18+0.76) | 0.600" -0.00) (15.24) NOTES: . NC = Do Not Connect. f Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. - SMD PACKAGE 0.785+0.010" (19.9420.25) 1413 . 11109 8 fo ft ff . 0.525+0.010" 0.695+0.015" TOP VIEWS. (13.3420.25) HPRiIXXW (17.6520.38) vy i VITRrTTTF 1234567 SIDE VIEWS 0.37520.005" + 1 (9.5240.13) Jy] pp nnn nnd 0.015+0.005" ~_F _>|[_ 9:02020.002" (0.38+0.13) (0.5120:.06) - _| (0.10030. 010" : (2.5440.25) . END VIEWS * 9.014#0:002" 4 S + Ne (0.3640.05) 4 . t -015+.010" PIN CONNECTIONS (384.26) PING | SINGLES | DUALS 1 ' 4VIN- 7 [) +VIN 2 -VIN -VIN a : 3 NG Ne | MATERIAL: Units are encapsulated with a wour -VOUT iow thermal resistance molding compound . g Vn UT cornnen which has excellent chemical resistance, wide operating temperature range, and good elec- 8 NC NC trical. properties even in high humidity 9 NC NC : 10 Ne NC .environments. The encapsulant and outer 1 NC NC shell of the unit have UL94V-0 ratings. Lead 13 NG NC material is phosphor bronze with a solder 14 NG NG plated surface to allow ease of solderability. RECOMMENDED LAND PATTERN __ J. |, 0-100" | (2.54) =H BBRE onde 0.980" (18.54) 0.040" (2.09) 02) "1 OOoOo0gdd 1 2 34567 | 0.680" | 16.51) MB 9006050 0000431 RECOMMENDED REFLOW PROFILE TIME (seconds)TYPICAL PERFORMANCE CURVES Specifications typical at T, = +25C, nominal input voltage, rated output current unless otherwise specified. VOUT VS LOAD VOUT VSLOAD | VOUT VS LOAD __ 45 Vout Models) (+5 Vout Models) . ( 12 Vout Models) 5.7 1 5.4 : 12.5 ; . NS 12.4 55 5.2 , NY 12.3 . * Pe, 12.2 3 5.3 M 3 5.0 : a 3 51 b ha aa ; rN 1 tat . ~ 12.0 49 4.6 - 11.9 - 6 400 80 120 160 20 #40 680 2 20 40 60 280 Output Current (mA) Output Current sach load (mA) Output Current each load (mA) VOUT VS LOAD "VOUT VS LOAD . VOUT VS LOAD (+12 Vout Models} (15 Vout Models) (15 Vout Modela) 12.6 15.9 16.5 12.5 15.7 16.0 12.4 15.5 15.5 5 3 123 3 $15.0 12.2 | 153 14.5 12.1 15.1 14.0 12.0 149 13.5 . a 10 20 3 40 0 20 40 60 80 . o 02 04 O68 08 1.0 Output Current each load (rMnA) Output Current each load (mA) Output Power each load (Watts) : OSCILLATION FREQUENCY VS EFFICIENCY VS LOAD TEMPERATURE 90 220 | : 75 J 200 8 / Efficiency (%) a am 30 160 5 16 140 7 7 Qo 20 40 60 80 86100 -30 Oo 30 60 90 % of Rated Load (%) Temperature (C) SAFE OPERATING AREA ~ LOAD CAPACITANCE ve INPUT RISE TIME : (S Vout models) LOAD ve INPUT RISE TIME 600 60. 500 sO v9 Sw | - i 3 SAFE OPERATING AREA z SAFE OPERATING AREA 3 200 3 20 r 100, 1a oO 6 10 185 20 28 30 38 40 45 80 . 5 19 18 20 26 20 35 40 45 50 Filge Time of input Voltage (mS) . Rlse.Time of Input Voltage (mS) LOAD CAPACITANCE ve INPUT RISE TIME NOTES: (12 Vaut models) . . : . nn 1.) When operated within the SAFE OPERATING AREA as defined g 0 by the above curves, the output voltage of HPR1XX devices is 5 @- guaranteed to be within 95% of its steady-state value within 100 50 milliseconds after the input voltage has reached 95% of its steady- Z 40 OPERATING AREA 5 state value. : z 2 2.) For dual output models, total (oad capacitance is the sum of the 10 capacitances on the plus and minus outputs. 0 . o 5 10 1s 20 25 30 36 40 as so Fise Time of Input Voltage (mS)