CLD-DS39 Rev 7G Product family data sheet Cree(R) XLamp(R) ML-B LEDs Product Description The Cree brings XLamp(R) lighting-class ML-B LED reliability and performance to 1/4-watt LEDs. The FEATURES Table of Contents * Available in white (2200K and Characteristics.......................................... 2 2600K to 8300K CCT) and 80-, 85- Flux Characteristics.................................. 2 and 90-CRI minimum Relative Spectral Power Distribution....... 3 XLamp ML-B LED expands Cree's * ANSI-compatible sub-bins Relative Flux vs. Junction Temperature... 3 lighting-class leadership to linear and * Maximum drive current: 175mA Electrical Characteristics.......................... 4 distributed lighting applications. With * 120 viewing angle, uniform Relative Flux vs. Current........................... 4 XLamp LED lighting-class reliability, a chromaticity profile Typical Spatial Distribution....................... 5 wide viewing angle, uniform light output, * Electrically neutral thermal path Thermal Design......................................... 5 and chromaticity * RoHS and REACh compliant Reflow Soldering Characteristics............. 6 binning in a 3.5-mm X 3.5mm package, * UL recognized component Notes......................................................... 7 the industry-leading XLamp Cree's history ML-B of LED continues (R) (E349212) Mechanical Dimensions........................... 9 segmentfocused Tape and Reel.......................................... 10 product innovation in LEDs for lighting Packaging................................................ 11 applications. The XLamp ML-B LED brings high performance and a smooth look to a wide range of lighting applications, including linear lighting, fluorescent www.cree.com/Xlamp retrofits and retail-display lighting. Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp (R) ML-B LED Characteristics Characteristics Unit Thermal resistance, junction to solder point C/W 25 degrees 120 mV/C -3.5 Viewing angle (FWHM) Temperature coefficient of voltage Minimum Typical ESD classification (HBM per Mil-Std-883D) Maximum Class 2 DC forward current mA 175 Reverse voltage V 5 Forward voltage (@ 80mA) V LED junction temperature C 3.3 3.5 150 Flux Characteristics (TJ=25C) The following table provides several base order codes for XLamp ML-B LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the ordercode nomenclature, please consult the XLamp ML LED Family Binning and Labeling document. Color Cool White Warm White 80-CRI Warm White 85-CRI Warm White 90-CRI Warm White CCT Range Minimum Luminous Flux (lm) @ 80mA Order Code Min. Max. Group Flux (lm) 4500 K 8300 K J0 23.5 MLBAWT-A1-0000-000W51 3700 K 4300 K J0 23.5 MLBAWT-A1-0000-000WE5 H0 18.1 MLBAWT-A1-0000-000VE5 2800 K 3200 K J0 23.5 MLBAWT-A1-0000-000WE7 H0 18.1 MLBAWT-A1-0000-000VE7 2000 K 2400 K G0 13.9 MLBAWT-A1-0000-000UEA 3700 K 4300 K H0 18.1 MLBAWT-H1-0000-000VE5 2800 K 3200 K H0 18.1 MLBAWT-H1-0000-000VE7 3700 K 4300 K H0 18.1 MLBAWT-P1-0000-000VE5 2800 K 3200 K H0 18.1 MLBAWT-P1-0000-000VE7 3700 K 4300 K H0 18.1 MLBAWT-U1-0000-000VE5 2800 K 3200 K H0 18.1 MLBAWT-U1-0000-000VE7 Notes: * Cree maintains a tolerance of 7% on flux measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2% for CRI measurements. See the Measurements section (page 7). * Typical CRI for Cool White (4300K - 8300K CCT) is 75. * Typical CRI for Warm White (2600K - 4300K CCT) is 80. * Minimum CRI for 80-CRI White is 80. * Minimum CRI for 85-CRI White is 85. * Minimum CRI for 90-CRI White is 90. Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 2 XLamp (R) ML-B LED Relative Spectral Power ML-B OK Relative Spectral Power Distribution Relative Radiant Power (%) 100 80 60 5000 K - 8300 K CCT 3500 K - 5000 K CCT 2600 K - 3500 K CCT 40 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (IF=80mA) 100% 90% Relative Luminous Flux 80% 70% 60% 50% 40% 30% 20% 10% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 3 XLamp (R) ML-B LED Electrical Characteristics (Tj = 25C) ML-B Good Electrical Characteristics (TJ=25C) 180 Forward Current (mA) 160 140 120 100 80 60 40 20 0 2.50 Relative Intensity vs. Current (Tj = 25C) 2.75 3.00 3.25 3.50 3.75 4.00 Forward Voltage (V) Relative Flux vs. Current (TJ=25C) 200% Relative Luminous Flux 180% 160% 140% 120% 100% 80% 60% 40% 20% 0% 0 25 50 75 100 125 150 175 Forward Current (mA) Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 4 XLamp (R) ML-B LED Typical Spatial Radiation Pattern Typical Spatial Distribution 100 Relative Luminous Intensity (%) 80 60 40 20 -90 -70 -50 -30 -10 0 10 30 50 70 90 Angle () Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life Thermal Design and optical characteristics. 200 180 Maximum Current (mA) 160 140 120 100 80 60 Rj-a = 30C/W 40 Rj-a = 40C/W 20 Rj-a = 50C/W 0 Rj-a = 60C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (C) Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 5 XLamp (R) ML-B LED Reflow Soldering Characteristics In testing, Cree has found XLamp ML-B LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak IPC/JEDEC J-STD-020C Time Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Lead-Free Solder 1.2C/second Preheat: Temperature Min (Tsmin) 120 C Preheat: Temperature Max (Tsmax) 170 C Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) 65-150 seconds 217 C 45-90 seconds 235 - 245 C Time Within 5C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 C/second Time 25C to Peak Temperature 4 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Note: While the high reflow temperatures (above) have been approved, Cree's best practice guideline for reflow is to use as low a temperature as possible during the reflow soldering process for these LEDs. Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 6 XLamp (R) ML-B LED Notes Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp ML-B LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp ML-B LEDs should be handled and Maximum Percent Relative Humidity stored as MSL 2a per JEDEC J-STD-033, meaning they have limited Temp. 30% 40% 50% 60% 70% 80% 90% exposure time before damage to the LED may occur during the soldering 35 C - - - 17 1 .5 .5 operation. The table on the right specifies the maximum exposure time 30 C - - - 28 1 1 1 in days depending on temperature and humidity conditions. LEDs with 25 C - - - - 2 1 1 exposure time longer than the specified maximums must be baked 20 C - - - - 2 1 1 according to the baking conditions listed below. Baking Conditions It is not necessary to bake all XLamp ML-B LEDs. Only the LEDs that meet all of the following criteria must be baked: 1. LEDs that have been removed from the original MBP. 2. LEDs that have been exposed to a humid environment longer than listed in the Moisture Sensitivity section above. 3. LEDs that have not been soldered. Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 7 XLamp (R) ML-B LED Notes - Continued LEDs should be baked at 70C for 24 hours. LEDs may be baked on the original reels. Remove LEDs from the MBP before baking. Do not bake parts at temperatures higher than 70C. This baking operation resets the exposure time as defined in the Moisture Sensitivity section above. Storage Conditions XLamp ML-B LEDs that have been removed from the original MBP but not soldered should be stored in one of the following ways: * Store the parts in a rigid metal container with a tight-fitting lid. Verify that the storage temperature is <30C, and place fresh desiccant and an RH indicator in the container to verify that the RH is no greater than 60%. * Store the parts in a dry, nitrogen-purged cabinet or container that actively maintains the temperature at <30 and the RH at no greater than 60%. * For short-term store only: LEDs can be resealed in the original MBP soon after opening. Fresh desiccant may be needed. Use the included humidity indicator card to verify <60% RH. If an environment of <60% RH is not available for storage, XLamp ML-B LEDs should be baked (described above) before reflow soldering. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of of www.cree.com. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL(R) Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING. Do not look at exposed LED lamps in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 8 XLamp (R) ML-B LED Mechanical Dimensions (TA=25C) MX3535 Pad Layout All measurements are .13mm unless otherwise indicated. Top View Top View Bottom View Side View Recommended FR4 Solder Pad Recommended MCPCB Solder Pad Alternative Solder Pad Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 9 6 5 4 3 2 1 REVISONS NOTICE E CONFIDENTIAL. THIS PLOT AND THE INFORMATION TAINED WITHIN ARE THE PROPRIETARY AND FIDENTIAL INFORMATION OF CREE, INC. THIS PLOT Y NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UTHORIZED PERSON WITHOUT THE WRITTEN CONSENT CREE INC. REV DESCRIPTION BY DATE A Released J.L. 7/1/09 DC 2/26/12 B ADDED CATHODE AND ANODE NOTES 1.5.1 4.0.1 XLamp (R) ML-B LED 8.0.1 1.75.10 APP'D 2.5.1 D Cathode Side Tape and Reel +.3 12.0 All Cree carrier tapes .0 conform to EIA-481D, Automated Component Handling Systems Standard. Except as noted, all dimensions in mm. Cathode Anode Side Mark (denoted by + and circle) (4 ) (8 ) (O1.5) C User Feed Direction (1.75 ) CATHODE SIDE END (1.65) START (12 ) Trailer 160mm (min) of empty Trailerpockets 160 mmwith (min) of sealed tape empty pockets (20sealed pockets with tapemin.) Loaded Pockets (1,000 Lamps) Loaded Pockets (1,400 pcs /Reel (20 pockets min.) ANODE SIDE Leader 400mm (min) of empty pockets with Leader 400 mm (min) of at least 100mm empty pockets with sealed by tape at least 100 mm sealed by tape (50 empty pockets min.) (50 empty pockets min.) B User Feed Direction Cover Tape THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .25 .XXX .125 X .5 FOR SHEET METAL PARTS ONLY .X 1.5 .XX .75 .XXX .25 X .5 SURFACE FINISH: 6 5 4 3 DATE DRAWN BY D. Seibel 7/1/09 CHECK DATE APPROVED DATE 4600 Silicon Drive Durham, N.C 27703 Phone (919) 313-5300 Fax (919) 313-5558 A TITLE Carrier Loading Specification-MX6 MATERIAL SIZE FINAL PROTECTIVE FINISH SCALE 1.6 Pocket Tape 2 C 4.000 REV. DRAWING NO. 2402-00005 SHEET 1 13mm 7" Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 10 B OF 1 /2 XLamp (R) ML-B LED Packaging Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Dessicant (inside bag) Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Humidity Indicator Card (inside bag) Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) Copyright (c) 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 11