ESD7421, SZESD7421 ESD Protection Diode Micro-Packaged Diodes for ESD Protection The ESD7421 is designed to protect voltage sensitive components from ESD. Excellent clamping capability, low leakage, and fast response time provide best in class protection on designs that are exposed to ESD. Because of its small size, it is suited for use in cellular phones, automotive sensors, infotainment, MP3 players, digital cameras and many other applications where board space comes at a premium. www.onsemi.com Pin 1 Pin 2 Specification Features * * * * * * * Low Capacitance 0.3 pF Low Clamping Voltage Low Leakage 100 nA Response Time is < 1 ns IEC61000-4-2 Level 4 ESD Protection SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant MARKING DIAGRAM 5 M G = Specific Device Code = Date Code = Pb-Free Package ORDERING INFORMATION MAXIMUM RATINGS Rating IEC 61000-4-2 (ESD) 5M G XDFN2 (SOD-882) CASE 711AM Symbol Contact Air Value Unit 12 15 kV Total Power Dissipation on FR-5 Board (Note 1) @ TA = 25C Thermal Resistance, Junction-to-Ambient PD 300 mW RqJA 400 C/W Junction and Storage Temperature Range TJ, Tstg -55 to +150 C TL 260 C Lead Solder Temperature - Maximum (10 Second Duration) Package Shipping ESD7421N2T5G XDFN2 (Pb-Free) 8000 / Tape & Reel SZESD7421N2T5G XDFN2 (Pb-Free) 8000 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR-5 = 1.0 x 0.75 x 0.62 in. See Application Note AND8308/D for further description of survivability specs. (c) Semiconductor Components Industries, LLC, 2016 October, 2017 - Rev. 3 1 Publication Order Number: ESD7421/D ESD7421, SZESD7421 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) IPP Parameter Symbol IPP Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP VRWM IR IT VC VBR2 VRWM IR IR VRWM VBR1 VC IT Working Peak Reverse Voltage V Maximum Reverse Leakage Current @ VRWM VBR1 Breakdown Voltage @ IT VBR2 Breakdown Voltage @ IT IT I IPP Bi-Directional Test Current *See Application Note AND8308/D for detailed explanations of datasheet parameters. ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise specified) Symbol Conditions Reverse Working Voltage VRWM Pin 1 to GND Pin 2 to GND Breakdown Voltage VBR1 IT = 1 mA, Pin 1 to GND 16.5 Breakdown Voltage VBR2 IT = 1 mA, Pin 2 to GND 10.5 Reverse Leakage Current IR VRWM = 5 V, I/O Pin to GND VRWM = 16 V, Pin 1 to GND 100 Clamping Voltage (Note 2) VC IEC61000-4-2, 8 kV Contact See Figures 2 and 3 Clamping Voltage TLP (Note 3) VC IPP = 8 A IPP = 16 A IPP = -8 A IPP = -16 A 35 38.1 -21 -29.5 Junction Capacitance CJ VR = 0 V, f = 1 MHz between I/O Pins and GND 0.3 Parameter Min Typ Max Unit 5 5 16 10 V V 14 V 500 1.0 nA mA V 0.6 pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. For test procedure see Figure 5 and application note AND8307/D. 3. ANSI/ESD STM5.5.1 - Electrostatic Discharge Sensitivity Testing using Transmission Line Pulse (TLP) Model. TLP conditions: Z0 = 50 W, tp = 100 ns, tr = 4 ns, averaging window; t1 = 30 ns to t2 = 60 ns. www.onsemi.com 2 ESD7421, SZESD7421 1.0 0.9 CAPACITANCE (pF) 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -5 -4 -3 -2 -1 0 1 2 3 5 4 VBias (V) 120 20 100 0 80 -20 VOLTAGE (V) VOLTAGE (V) Figure 1. Typical CV Characteristic Curve Pin1 to GND (GND connected to Pin2) 60 40 20 -60 -80 -100 0 -20 -25 -40 0 25 50 75 TIME (ns) 100 125 150 -120 -25 Figure 2. IEC61000-4-2 +8 kV Contact ESD Clamping Voltage Pin1 to GND (GND connected to Pin2) 0 25 50 75 TIME (ns) 100 125 Figure 3. IEC61000-4-2 -8 kV Contact ESD Clamping Voltage Pin1 to GND (GND connected to Pin2) www.onsemi.com 3 150 ESD7421, SZESD7421 IEC61000-4-2 Waveform IEC 61000-4-2 Spec. Ipeak Level Test Voltage (kV) First Peak Current (A) Current at 30 ns (A) Current at 60 ns (A) 1 2 7.5 4 2 2 4 15 8 4 3 6 22.5 12 6 4 8 30 16 8 100% 90% I @ 30 ns I @ 60 ns 10% tP = 0.7 ns to 1 ns Figure 4. IEC61000-4-2 Spec Device ESD Gun Under Oscilloscope Test 50 W 50 W Cable Figure 5. Diagram of ESD Clamping Voltage Test Setup The following is taken from Application Note AND8308/D - Interpretation of Datasheet Parameters for ESD Devices. systems such as cell phones or laptop computers it is not clearly defined in the spec how to specify a clamping voltage at the device level. ON Semiconductor has developed a way to examine the entire voltage waveform across the ESD protection diode over the time domain of an ESD pulse in the form of an oscilloscope screenshot, which can be found on the datasheets for all ESD protection diodes. For more information on how ON Semiconductor creates these screenshots and how to interpret them please refer to AND8307/D. ESD Voltage Clamping For sensitive circuit elements it is important to limit the voltage that an IC will be exposed to during an ESD event to as low a voltage as possible. The ESD clamping voltage is the voltage drop across the ESD protection diode during an ESD event per the IEC61000-4-2 waveform. Since the IEC61000-4-2 was written as a pass/fail spec for larger www.onsemi.com 4 20 -20 18 -18 16 -16 14 -14 CURRENT (A) CURRENT (A) ESD7421, SZESD7421 12 10 8 6 -12 -10 -8 -6 4 -4 2 -2 0 0 NOTE: 5 10 15 20 25 30 35 40 0 45 0 -5 -10 -15 -20 -25 -30 VOLTAGE (V) VOLTAGE (V) Figure 6. Positive TLP IV Curve Figure 7. Negative TLP IV Curve -35 TLP parameter: Z0 = 50 W, tp = 100 ns, tr = 300 ps, averaging window: t1 = 30 ns to t2 = 60 ns. Transmission Line Pulse (TLP) Measurement L Transmission Line Pulse (TLP) provides current versus voltage (I-V) curves in which each data point is obtained from a 100 ns long rectangular pulse from a charged transmission line. A simplified schematic of a typical TLP system is shown in Figure 8. TLP I-V curves of ESD protection devices accurately demonstrate the product's ESD capability because the 10s of amps current levels and under 100 ns time scale match those of an ESD event. This is illustrated in Figure 9 where an 8 kV IEC 61000-4-2 current waveform is compared with TLP current pulses at 8 A and 16 A. A TLP I-V curve shows the voltage at which the device turns on as well as how well the device clamps voltage over a range of current levels. S Attenuator / 50 W Coax Cable 10 MW IM 50 W Coax Cable VM DUT VC Oscilloscope Figure 8. Simplified Schematic of a Typical TLP System Figure 9. Comparison Between 8 kV IEC 61000-4-2 and 8 A and 16 A TLP Waveforms www.onsemi.com 5 ESD7421, SZESD7421 PACKAGE DIMENSIONS XDFN2 1.0 x 0.6, 0.65P (SOD-882) CASE 711AM ISSUE O NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. EXPOSED COPPER ALLOWED AS SHOWN. 0.10 C A B D EE PIN 1 INDICATOR E DIM A A1 b D E e L 0.05 C TOP VIEW A NOTE 3 0.10 C 0.10 C A1 C SIDE VIEW RECOMMENDED SOLDER FOOTPRINT* SEATING PLANE 1.20 e 2X b e/2 MILLIMETERS MIN MAX 0.34 0.44 --- 0.05 0.43 0.53 1.00 BSC 0.60 BSC 0.65 BSC 0.20 0.30 0.05 M C A B L 0.05 0.60 PIN 1 1 2X 2X 0.47 DIMENSIONS: MILLIMETERS M *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. C A B BOTTOM VIEW ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative ESD7421/D