IDC 2.54mm RA CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables (.100") pitch Features ----------------------- * Twin U-slot The twin U-slot is the most important IDC element in Beam B JST's RA connectors. As shown in the figure, wire conductors are connected Slot Beam A Beam supporter between the slots of U-shaped parallel beams, and the Conductor distance between each adjacent pair of beams is designed to be one third of the Double-leaf contact pitch of wire strands. * Two-die processing and selective gold plating Two precision dies are used to blank and form the contacts. After the first die blanks the contacts, they are gold plated at crucial points. Then, the contacts are formed by the second To keep pace with the rapid developments in electronics, internal and external connection systems are naturally increasing in density. At the same time, labor requirements and overall costs must be minimized. RA connectors meet all of these requirements, while providing increased reliability. These connectors, whose materials, shapes, dimensions, and surface treatments have been carefully selected, are based on the latest technological information that has been accumulated and improved over years of experience in crimping connection technology. die. This eliminates unnecessary gold-plating and overall costs are minimized. This innovation is another example of our industry-leading technology. * Selective gold-plated posts Header posts are also selectively gold-plated. While square wire material is used for production of conventional posts in loose pieces, continuous flat strip is used for production of our post in chain form. This allows selective gold-plating and provides cost reduction. * Cost-efficient JST's unique technology allows it to produce connectors that are extremely reliable and cost-efficient. * Interchangeable cables and connectors Short locking lever RA connectors fit commercially available 1.27mm (.050") pitch flat ribbon cables. A variety of ribbon cables are offered according to the purpose. Moreover, the RA series receptacles and header are interchangeable with the similar type of connectors commercially available. Contact JST before procuring cables and other manufacturer's mating connectors. Long locking lever Standards --------------------- 0 1 Recognized E60389 Certified LR20812 342 RA CONNECTOR Receptacle--------------------------------------------------------------- Specifications Characteristics Current rating Voltage rating Temperature range Materials 1.0A AC, DC 300V AC, DC Contact Phosphor bronze * Nickel-undercoated, gold-plated * Copper-undercoated, tin/lead-plated (including temperature rise in applying electrical current) -55C to +125C(gold-plated) -55C to +105C(tin-plated) Receptacle housing Glass-filled PBT, UL94V-0, black Cover housing Glass-filled PBT, UL94V-0, black Strain relief Glass-filled PBT, UL94V-0, black Contact resistance Initial value/10m max. (gold-plated) 40m max. (tin-plated) After environmental testing/ 15m max. (gold-plated) 50m max. (tin-plated) Insulation resistance 5,000M min. Withstanding voltage Applicable wire 500V AC/5 seconds *Contact JST details. AWG #28, 1.27mm(.050") pitch ribbon cable Applicable cables Ribbon cables conforming to the following specifications can be used with RA connector receptacles. Contact JST for details. P W 10 to 14 0.18(.007) 0.3(.012) 16 to 26 0.28(.011) 0.3(.012) 34 to 60 0.38(.015) 0.3(.012) 1.27(.050)X(n-1)= P Insulator Conductor Conductor 1.27(.050) X n= W 0.9(.035) 1.270.05 pitch (.050.002) Dimensional tolerance mm(in.) No.of conductors (n) AWG #28 stranded wire Construction: 7/0.127mm (.005")dia Material: Tin-plated annealed copper wire AWG #28 solid wire Construction:0.32mm (.013")dia. Material: Tin-plated annealed copper wire Insulator Soft vinyl chloride 343 RA CONNECTOR Model number identification RA -- S 50 1 T -- 1 2 00 * Series name * Product name: Receptacle * Number of circuits: 10, 14, 16, 20, 26, 34, 40, 50, 60 Note: The standard gold-plated type is identified by the suffix number [-1200], but this suffix number is usually omitted. The gold-plated type identified by [-0200] is indicated by [-0] for short. Other types must be identified by the full code number. Special types do not conform to the above coding system. * Number of guide ribs: 10 to 40 circuits ... 1 50 circuits ... 0, 1, 2 60 circuits ... 1, 2 * Connection method: T ... Through type S ... Short lock through type * With or without strain relief 0 ... Without 1 ... With * Contact material: 2 ... Phosphor bronze for spring * Surface finish 00... Gold-plated (flash) 02... 0.2micron(8micro-inch) gold-plated 03... 0.4micron(16micro-inch) gold-plated 04... 0.76micron(30micro-inch) gold-plated 90... Tin/lead-plated Receptacle for long locking lever header Receptacle for short locking lever header Polarizing identification 3.4 7.0(.276) (.133) 10.4(.409) Note 1 10.4(.409) 3.4 3.7 7.0(.276) (.134) (.146) 16.0(.630) Note 2 C Polarizing identification A B A B Guide rib Guide rib 1.0(.039) 2.54(.100) 4.0(.157) Cover housing 4.0(.157) 2.54(.100) Strain relief Receptacle housing 1.0(.039) 6.1(.240) 6.1(.240) Note 1: Height without strain relief Note 2: Height with strain relief Dimensions mm(in.) Model No. Circuits Type of cover housing No.of guide ribs Gold-plated receptacles With strain relief Without strain relief Tin-plated receptacles (With strain relief) A B C Q'ty / box 10 1 RA-S101T RA-S101T-0 RA-S101T-1290 10.16( .400) 17.30( .681) 13.00( .512) 300 14 1 RA-S141T RA-S141T-0 RA-S141T-1290 15.24( .600) 22.38( .881) 18.08( .712) 200 1 RA-S161T RA-S161T-0 RA-S161T-1290 17.78( .700) 24.92( .981) 20.62( .812) 200 20 1 RA-S201T RA-S201T-0 RA-S201T-1290 22.86( .900) 30.00(1.181) 25.70(1.012) 150 26 1 RA-S261T - RA-S261T-0 30.48(1.200) 37.62(1.481) 33.32(1.312) 150 RA-S341S-0 RA-S261T-1290 - RA-S341T RA-S341T-0 RA-S341T-1290 RA-S401T-0 16 34 Long type Short type 1 Long type 40 Long type 1 Short type 1 RA-S401T - RA-S502S-0 RA-S401T-1290 - 0 RA-S500T RA-S500T-0 RA-S500T-1290 1 RA-S501T RA-S501T-0 RA-S501T-1290 2 RA-S502T - RA-S502T-0 RA-S602S-0 RA-S502T-1290 - RA-S601T RA-S601T-0 RA-S601T-1290 RA-S602T RA-S602T-0 RA-S602T-1290 50 Long type Short type 1 60 Long type 2 344 - 40.64(1.600) 47.78(1.881) 100 43.48(1.712) 48.26(1.900) 60.96(2.400) 55.40(2.181) 51.10(2.012) 100 - 75 63.80(2.512) 75 68.10(2.681) - 73.66(2.900) 80.80(3.181) 76.50(3.012) 75 RA CONNECTOR Strain relief and cover housing Indicate the Model No. shown below when ordering strain relief and cover separately. Strain relief Dimensions mm(in.) Model No. 6.1(.240) 3.4(.134) JST 4.4(.173) A Circuits Strain relief Cover housing Long type A 10 RA-SR10T-1 RA-CH10T Short type - 14 RA-SR14T-3 RA-CH14T - 16 RA-SR16T-1 RA-CH16T - 24.92( .981) 20 RA-SR20T-3 RA-CH20T - 30.00(1.181) 26 RA-SR26T-3 RA-CH26T - 37.62(1.481) 34 RA-SR34T-3 RA-CH34T 47.78(1.881) 40 RA-SR40T-3 RA-CH40T RA-CH34S - 50 RA-SR50T-3 RA-CH50T RA-CH50S 68.10(2.681) 60 RA-SR60T-1 RA-CH60T RA-CH60S 80.80(3.181) 17.30( .681) 22.38( .881) 55.40(2.181) Cover housing For long locking lever header A 7.0(.276) 3.4(.134) 6.1(.240) Cover housing For short locking lever header A 7.0(.276) 3.4(.134) 6.1(.240) 345 RA CONNECTOR Shrouded header---------------------------------------------------------- With long locking lever With short locking lever Top entry type Side entry type Specifications Materials and Finish Characteristics Current rating Voltage rating Temperature range 1.0A AC, DC (including temperature rise in applying electrical current) -55C to+125C(gold-plated) -55C to+105C(tin-plated) Insulation resistance 5,000M min. Withstanding voltage 500V AC/5 seconds Applicable PC board thickness 1.6mm(.063") Note: Contact JST for details. 346 Post Brass * Nickel-undercoated Mating section: Gold-plated Solder tail: Tin/lead-plated * Copper-undercoated, tin/lead-plated Housing Glass-filled PBT, UL94V-0, black 300V AC, DC RA CONNECTOR Model number identification RA * Series name H 50 1 TD Note: The standard gold-plated type is identified by the suffix number [-1110], but this suffix number is usually omitted. Other types must be identified by the full code number. Special types do not conform to the coding system in the left. 1 1 10 * Product name: Header * Number of circuits: 10, 14, 16, 20, 26, 34, 40, 50, 60 * Number of guide grooves: 10 to 40 circuits...1 50 and 60 circuits...2 * PC board mounting method TD...Top entry SD...Side entry * Type of locking lever: 0...Without locking lever 1...Long locking lever 2...Short locking lever * Post material: 1...Brass * Surface finish: 10...Gold-plated (flash) 13...0.4micron(16micro-inch) gold-plated 90...Tin/lead-plated 12...0.2micron(8micro-inch) gold-plated 14...0.76micron(30micro-inch) gold-plated Long locking lever Side entry type Short locking lever Top entry type Top entry type 5.4(.213) Long locking lever 5.4(.213) 3.0(.118) [23.05(.907)] 17.5(.689) Polarizing mark 14.2(.559) 2.54(.100) 17.5(.689) [27.95(1.100)] Short locking lever 2.54(.100) 8.94(.352) 3.0(.118) 3.6(.142) 8.8(.346) max. (when unlocked) 5.85 (.230) 11.0(.433) 2.54(.100) A B 8.9(.350) 8.94(..352) Model number Circuits Type of locking lever No.of guide grooves Dimensions mm(in.) Tin-plated.header (With locking lever) Gold-plated header (With locking lever) Top entry type 2.54(.100) 0.5(.020) A B Q'ty / box Side entry type Top entry type Side entry type 10 1 RA-H101TD RA-H101SD RA-H101TD-1190 RA-H101SD-1190 10.16( .400) 32.16(1.266) 50 14 1 RA-H141TD RA-H141SD RA-H141TD-1190 RA-H141SD-1190 15.24( .600) 37.26(1.467) 50 1 RA-H161TD RA-H161SD RA-H161TD-1190 RA-H161SD-1190 17.78( .700) 39.78(1.566) 50 20 1 RA-H201TD RA-H201SD RA-H201TD-1190 RA-H201SD-1190 22.86( .900) 44.86(1.766) 50 26 1 RA-H261TD RA-H261SD - RA-H261TD-1190 - RA-H261SD-1190 - 30.48(1.200) 52.48(2.066) 25 40.64(1.600) 62.64(2.466) 25 RA-H341SD - RA-H341TD-1190 - RA-H341SD-1190 - 48.26(1.900) 70.26(2.766) 25 RA-H501TD-2110 RA-H401SD - RA-H401TD-1190 - RA-H401SD-1190 - RA-H501TD RA-H501SD RA-H501TD-1190 RA-H501SD-1190 60.96(2.400) 82.96(3.266) 25 RA-H502TD RA-H601TD-2110 RA-H502SD - RA-H502TD-1190 - RA-H502SD-1190 - RA-H601TD RA-H601SD RA-H601TD-1190 RA-H601SD-1190 73.66(2.900) 95.66(3.766) 25 RA-H602TD RA-H602SD RA-H602TD-1190 RA-H602SD-1190 16 Long type Short type 1 34 RA-H341TD Long type Short type 1 40 Short type 1 Long type 2 Short type 60 RA-H401TD-2110 RA-H401TD Long type 50 RA-H341TD-2110 1 Long type 2 Note: Headers with locking levers can be used only for receptacle with strain reliefs. 347 RA CONNECTOR PC board layout (viewed from component side) ------------------------------------ 2.540.05 (.100 .002 ) AH 8.90 0.1 (.350 .004) (Note 3) +.004 1.0 -+0.1 0.05 (.039 -.002 ) dia 2.540.05(.100.002) A-1 0.74(.290) 2.7(.106) dia.(Note 2) (Mounting screw hole) 2.540.05 (.100.002 ) (Note 3) 14.0 [ (.551) ] +.004 1.0 +0.1 -0.05 (.039 -.002 )dia Side entry type 2.54 0.05 (.100 .002 ) Top entry type 2.7(.106) dia.(Note 2) (Mounting screw hole) 5.850.1 (.230.004) (Edge of PC Board) BS Dimensions mm(in.) Circuits AH 10 10.16( .400) 21.86( .861) 14 15.24( .600) 26.94(1.061) 16 17.78( .700) 29.48(1.161) 20 22.86( .900) 34.56(1.361) 26 30.48(1.200) 42.18(1.661) 34 40.64(1.600) 52.34(2.061) 40 48.26(1.900) 59.96(2.361) 50 60.96(2.400) 72.66(2.861) 60 73.66(2.900) 85.36(3.361) 348 BS Note: 1. Tolerances are non-cumulative:0.05mm(.002" ) for all centers. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 2. The mounting screw holes are not required for standard headers. 3. This is normally No. 1 pin position.