2www.irf.com
IRHM7064IRHM7064
IRHM7064IRHM7064
IRHM7064 Pre-IrradiationPre-Irradiation
Pre-IrradiationPre-Irradiation
Pre-Irradiation
Note: Corresponding Spice and Saber models are available on the G&S Website.Note: Corresponding Spice and Saber models are available on the G&S Website.
Note: Corresponding Spice and Saber models are available on the G&S Website.Note: Corresponding Spice and Saber models are available on the G&S Website.
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
Source-Drain Diode Ratings and CharacteristicsSource-Drain Diode Ratings and Characteristics
Source-Drain Diode Ratings and CharacteristicsSource-Drain Diode Ratings and Characteristics
Source-Drain Diode Ratings and Characteristics
ParameterParameter
ParameterParameter
Parameter MinMin
MinMin
Min TypTyp
TypTyp
Typ MaxMax
MaxMax
Max UnitsUnits
UnitsUnits
Units Test ConditionsTest Conditions
Test ConditionsTest Conditions
Test Conditions
ISContinuous Source Current (Body Diode) 35*
ISM Pulse Source Current (Body Diode) ➀284
VSD Diode Forward Voltage 1.5 V Tj = 25°C, IS = 35A, VGS = 0V ➃
trr Reverse Recovery Time 360 nS Tj = 25°C, IF = 35A, di/dt ≤ 100A/µs
QRR Reverse Recovery Charge 3.1 µC VDD ≤ 50V ➃
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
A
Thermal ResistanceThermal Resistance
Thermal ResistanceThermal Resistance
Thermal Resistance
ParameterParameter
ParameterParameter
Parameter MinMin
MinMin
Min TypTyp
TypTyp
Typ MaxMax
MaxMax
Max UnitsUnits
UnitsUnits
Units Test ConditionsTest Conditions
Test ConditionsTest Conditions
Test Conditions
RthJC Junction-to-Case 0.50
RthJA Junction-to-Ambient 48 °C/W Typical socket mount
RthCS Case-to-Sink 0.21
Electrical CharacteristicsElectrical Characteristics
Electrical CharacteristicsElectrical Characteristics
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)@ Tj = 25°C (Unless Otherwise Specified)
@ Tj = 25°C (Unless Otherwise Specified)@ Tj = 25°C (Unless Otherwise Specified)
@ Tj = 25°C (Unless Otherwise Specified)
ParameterParameter
ParameterParameter
Parameter MinMin
MinMin
Min TypTyp
TypTyp
Typ MaxMax
MaxMax
Max UnitsUnits
UnitsUnits
Units Test ConditionsTest Conditions
Test ConditionsTest Conditions
Test Conditions
BVDSS Drain-to-Source Breakdown Voltage 60 V VGS = 0V, ID = 1.0mA
∆BVDSS/∆TJTemperature Coefficient of Breakdown 0.056 V/°C Reference to 25°C, ID = 1.0mA
Voltage
RDS(on) Static Drain-to-Source On-State 0.021 ΩVGS = 12V, ID = 35A
Resistance
VGS(th) Gate Threshold Voltage 2.0 4.0 V VDS = VGS, ID = 1.0mA
gfs Forward Transconductance 18 S ( )V
DS > 15V, IDS = 35A ➃
IDSS Zero Gate Voltage Drain Current 25 VDS= 48V ,VGS=0V
250 VDS = 48V,
VGS = 0V, TJ = 125°C
IGSS Gate-to-Source Leakage Forward 100 VGS = 20V
IGSS Gate-to-Source Leakage Reverse -100 VGS = -20V
QgTotal Gate Charge 270 VGS =12V, ID = 35A
Qgs Gate-to-Source Charge 60 nC VDS = 30V
Qgd Gate-to-Drain (Miller) Charge 110
td(on) Turn-On Delay Time 27 VDD =30V, ID = 35A
trRise Time 120 VGS =12V, RG = 2.35Ω
td(off) Turn-Off Delay Time 120
tfFall Time 100
LS + LDTotal Inductance 6.8 Measured from Drain lead (6mm /0.25in from
package) to Source lead (6mm /0.25in. from
Package) with Source wires internally
bonded from Source Pin to Drain Pad
Ciss Input Capacitance 4900 VGS = 0V, VDS = 25V
Coss Output Capacitance 2800 pF f = 1.0MHz
Crss Reverse Transfer Capacitance 860
nA
Ω
➃
nH
ns
µA
*Current is limited by pin diameter