Light Touch Switches/EVQP0/P1/9P
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
E
1
V
2
Q
3 4
05M
5678 9
4th, 5th, 6th
P1K
P1Y
P19
P1F
P1D
P04
9P1
Operating Force
2.2 N
2.5 N
1.6 N
2.0 N
2.5 N
3.0 N
3.5 N
Travel
1.0 mm
1.3 mm
7th & 8th
05
Height from Bottom to Knob Top
5.0 mm
9th
M
Push Plate Color
Natural
■Specifi cations
Type Snap action/Push-on type SPST
Electrical
Rating 10 µA 2 Vdc to 50 mA 12 Vdc (Resistive load)
Contact Resistance 100 m액 max.
Insulation Resistance 100 M액 min. (at 100 Vdc)
Dielectric With stand ing Voltage
250 Vac for 1 minute
Bouncing 10 ms max. (ON, OFF)
Mechanical Operating Force
1.6 N±0.5 N, 2.0 N±0.6 N
2.5 N±0.6 N
3.0 N±0.8 N
3.5 N±1.0 N
2.2 N±0.6 N
2.5 N±0.6 N
Travel 1.3 mm±0.2 mm 1.0 mm±0.2 mm
Endurance Operating Life 3.5 N type: 30000 cycles min.
1.6 N, 2.0 N, 2.2 N, 2.5 N, 3.0 N types: 100000 cycles min.
Operating Temperature –40 °C to +85 °C
Storage Temperature –40 °C to +85 °C (Bulk)
–20 °C to +60 °C (Taping)
Minimum Quantity/Packing Unit 2000 pcs. Embossed Taping (Reel Pack)
Quantity/Carton 10000 pcs.
■Features
●External dimensions : 6.0 mm҂6.1 mm, Height 5.0 mm
(Including the push plate)
●Steady and low contact resistance (100 mΩ max.)
●Excellent solderability (J-bent-type terminals)
6 mm Square Long Travel SMD
Light Touch Switches
Type: EVQP0/EVQP1/EVQ9P
■Explanation of Part Numbers
■Recommended Applications
●Car electronics equipment
Oct. 201200
Light Touch Switches/EVQP0/P1/9P
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
PWB land pattern for reference
Circuit diagram
4.5±0.1
A'
A' B'
AB
B'
AB
6.1±0.1
1.01.0
4.5±0.1
3.6
10.0
0.75
6.0 3.5
H
(4.0)
φ4.6
1.0±0.3
R0.2
7.4 0
-
0.6
■Dimensions in mm (not to scale)
Part Numbers Operating Force Travel H=Height Push Plate Color Operating Life
EVQP1K05M2.2 N1.0 mm 5.0 mm Natural100000 cycles
EVQP1Y05M2.5 N1.0 mm 5.0 mm Natural100000 cycles
EVQP1905M1.6 N1.3 mm 5.0 mm Natural100000 cycles
EVQP1F05M2.0 N1.3 mm 5.0 mm Natural100000 cycles
EVQP1D05M2.5 N1.3 mm 5.0 mm Natural100000 cycles
EVQP0405M 3.0 N1.3 mm 5.0 mm Natural100000 cycles
EVQ9P105M3.5 N1.3 mm 5.0 mm Natural30000 cycles
EVQP0
EVQP1
EVQ9P
(Embossed Taping)
Oct. 201200
Light Touch Switches/EVQP0/P1/9P
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
T
WA
B
E
C
D
r
t
P2P0
P1
t2
t1
φD0
A
B
Feeding hole
Chip component Tape running direction
Chip pocket
F
W
E
Tape width=12.0 mm
180
260
MAX.
150
230
90±30 40±10
(Normal Temp.)
Operation Top (°C)
Soldering Time (s)
Fan or Normal Temp.
Part No. Height ABWFEP
1P2P0D0 Dia. t1t2
EVQP0
EVQP1
EVQ9P
5.0 6.4
±0.2
7.9
±0.2 12.0±0.3
5.5
±0.1 1.75±0.10 8.0±0.1 2.0±0.1 4.0±0.1 1.5+0.1 0.4±0.1 5.25±0.20
Unit: mm
–0
Item A B C D E
Rate (mm)
φ370.0±2.0 φ50.0 min. φ
13.0±0.5 φ21.0±1.0 2.0±0.5
Item W T t r
Rate (mm)
14.0±1.5 — 1.0 to 3.0 1.0±0.5
●Standard Reel Dimensions in mm (not to scale)
■Recommended Refl ow Soldering Conditions
●Embossed Carrier Tap ing
Oct. 201200
