TLCR5200, TLCY5200 www.vishay.com Vishay Semiconductors Ultrabright LED, O 5 mm Untinted Non-Diffused Package FEATURES * Untinted non-diffused lens * Utilizing ultrabright AllnGaP (AS) * High luminous intensity * High operating tempreature: Tj (chip junction temperature) up to 125 C for AllnGaP devices * Luminous intensity and color categorized for each packing unit 19223 DESCRIPTION * ESD-withstand voltage: Up to 2 kV according to JESD22-A114-B The TLC.52.. series are a clear, non-diffused 5 mm LED for high end applications where supreme luminous intensity required. * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 These lamps with clear untinted plastic case utilize the highly developed ultrabright AlInGaP (AS). APPLICATIONS The lens and the viewing angle is optimized to achieve best performance of light output and visibility. * Outdoor LED panels PRODUCT GROUP AND PACKAGE DATA * Central high mounted stop lights (CHMSL) for motor vehicles * Interior and exterior lighting * Instrumentation and front panel indicators * Product group: LED * Replaces incandescent lamps * Package: 5 mm * Traffic signals * Product series: power * Light guide design * Angle of half intensity: 15 PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) MIN. TYP. MAX. at IF (mA) WAVELENGTH (nm) MIN. TYP. MAX. at IF (mA) FORWARD VOLTAGE (V) MIN. TYP. MAX. at IF (mA) TECHNOLOGY TLCR5200 Red 1350 4000 - 50 611 616 622 50 - 2.1 2.7 50 AllnGaP on GaAs TLCY5200 Yellow 1350 4000 - 50 585 590 597 50 - 2.1 2.7 50 AllnGaP on GaAs ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) TLCR5200, TLCY5200 PARAMETER TEST CONDITION SYMBOL VALUE VR 5 V Tamb 85 C IF 50 mA tp 10 s IFSM 1 A PV 135 mW Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature UNIT Tj 125 C Operating temperature range Tamb - 40 to + 100 C Storage temperature range Tstg - 40 to + 100 C Tsd 260 C RthJA 300 K/W Soldering temperature t 5 s, 2 mm from body Thermal resistance junction/ambient Note (1) Driving the LED in reverse direction is suitable for a short term application Rev. 1.4, 24-Apr-13 Document Number: 81354 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCR5200, TLCY5200 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) TLCR5200, RED TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) PARAMETER IF = 50 mA TLCR5200 IV 1350 4000 - mcd Dominant wavelength IF = 50 mA d 611 616 622 nm Peak wavelength IF = 50 mA p - 622 - nm Spectral bandwidth at 50 % Irel max. IF = 50 mA - 18 - nm deg Angle of half intensity IF = 50 mA - 15 - Forward voltage IF = 50 mA VF - 2.1 2.7 V Reverse voltage IR = 10 A VR 5 - - V Temperature coefficient of VF IF = 50 mA TCVF - - 3.5 - mV/K Temperature coefficient of d IF = 50 mA TCd - 0.05 - nm/K Note (1) In one packing unit I Vmax./IVmin. 2.0 OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) TLCY5200, YELLOW TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) PARAMETER IF = 50 mA TLCY5200 IV 1350 4000 - mcd Dominant wavelength IF = 50 mA d 585 590 597 nm Peak wavelength IF = 50 mA p - 593 - nm Spectral bandwidth at 50 % Irel max. IF = 50 mA - 17 - nm deg Angle of half intensity IF = 50 mA - 15 - Forward voltage IF = 50 mA VF - 2.1 2.7 V Reverse voltage IR = 10 A VR 5 - - V Temperature coefficient of VF IF = 50 mA TCVF - - 3.5 - mV/K Temperature coefficient of d IF = 50 mA TCd - 0.1 - nm/K Note (1) In one packing unit I Vmax./IVmin. 2.0 LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD LIGHT INTENSITY (mcd) MIN. MAX. FF 1350 2700 GG 1800 3600 HH 2400 4800 II 3200 6400 KK 4300 8600 LL 5750 11 500 MM 7500 15 000 NN 10 000 20 000 PP 13 500 27 000 QQ 18 000 36 000 RR 24 000 48 000 SS 32 000 64 000 TT 43 000 86 000 UU 57 500 115 000 Rev. 1.4, 24-Apr-13 Note * Luminous intensity is tested at a current pulse duration of 25 ms. The type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each bag (there will be no mixing of two groups on each bag). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one bag. In order to ensure availability, single wavelength groups will not be orderable. COLOR CLASSIFICATION DOM. WAVELENGTH (nm) GROUP 0 1 2 3 YELLOW RED MIN. MAX. MIN. MAX. 585 587 589 592 588 591 594 597 611 614 618 622 Note * Wavelengths are tested at a current pulse duration of 25 ms. Document Number: 81354 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCR5200, TLCY5200 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 1.2 IV rel. - Relative Luminous Intensity IF - Forward Current (mA) 60 50 yellow red 40 30 20 10 yellow 1.0 0.8 0.6 0.4 0.2 0 0 0 20 40 60 80 100 Tamb - Ambient Temperature (C) 16710 540 120 Fig. 1 - Forward Current vs. Ambient Temperature 600 620 640 100 red 0.8 0.6 0.4 0.2 0.0 570 590 610 630 650 10 40 20 0 1.5 1.7 1.9 2.1 2.3 VF - Forward Voltage (V) 15974 Fig. 2 - Relative Intensity vs. Wavelength 0 60 670 - Wavelength (nm) 16007 red yellow 80 IF - Forward Current (mA) 1.0 2.5 Fig. 5 - Forward Current vs. Forward Voltage 10 20 30 40 1.0 0.9 50 0.8 60 70 0.7 80 IV rel - Relative Luminous Intensity Irel. - Relative Luminous Intensity 580 - Wavelength (nm) Fig. 4 - Relative Intensity vs. Wavelength 1.2 IV rel - Relative Luminous Intensity 560 16008 red 1 0.1 0.01 0.6 0.4 0.2 0 0.2 0.4 17534 Fig. 3 - Relative Intensity vs. Angular Displacement Rev. 1.4, 24-Apr-13 1 0.6 15978 10 100 IF - Forward Current (mA) Fig. 6 - Relative Luminous Flux vs. Forward Current Document Number: 81354 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCR5200, TLCY5200 www.vishay.com Vishay Semiconductors 10 IV rel - Relative Luminous Intensity yellow 1 0.1 0.01 1 10 IF - Forward Current (mA) 15979 100 Fig. 7 - Relative Luminous Flux vs. Forward Current PACKAGE DIMENSIONS in millimeters R 2.49 (sphere) < 0.7 0.15 7.7 8.7 0.3 35.1 0.55 12.1 0.3 O 5.8 0.15 C (4.3) A Area not plane 1.1 0.25 1 min. O 5 0.15 technical drawings according to DIN specifications 0.5 0.15 0.5 +- 0.05 + 0.15 - 0.05 2.54 nom. Drawing-No.: 6.544-5258.07-4 Issue: 4; 19.05.09 14339 Rev. 1.4, 24-Apr-13 Document Number: 81354 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: TLCR5200 TLCY5200