TLCR5200, TLCY5200
www.vishay.com Vishay Semiconductors
Rev. 1.4, 24-Apr-13 1Document Number: 81354
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Ultrabright LED, Ø 5 mm Untinted Non-Diffused Package
DESCRIPTION
The TLC.52.. series are a clear, non-diffused 5 mm LED for
high end applications where supreme luminous intensity
required.
These lamps with clear untinted plastic case utilize the
highly developed ultrabright AlInGaP (AS).
The lens and the viewing angle is optimized to achieve best
performance of light output and visibility.
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
•Package: 5 mm
• Product series: power
• Angle of half intensity: ± 15°
FEATURES
• Untinted non-diffused lens
• Utilizing ultrabright AllnGaP (AS)
• High luminous intensity
• High operating tempreature: Tj (chip junction
temperature) up to 125 °C for AllnGaP devices
• Luminous intensity and color categorized for
each packing unit
• ESD-withstand voltage: Up to 2 kV according to
JESD22-A114-B
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Interior and exterior lighting
• Outdoor LED panels
• Instrumentation and front panel indicators
• Central high mounted stop lights (CHMSL) for motor
vehicles
• Replaces incandescent lamps
• Traffic signals
• Light guide design
Note
(1) Driving the LED in reverse direction is suitable for a short term application
19223
PARTS TABLE
PART COLOR
LUMINOUS INTENSITY
(mcd) at IF
(mA)
WAVELENGTH
(nm) at IF
(mA)
FORWARD VOLTAGE
(V) at IF
(mA) TECHNOLOGY
MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
TLCR5200 Red 1350 4000 - 50 611 616 622 50 - 2.1 2.7 50 AllnGaP on GaAs
TLCY5200 Yellow 1350 4000 - 50 585 590 597 50 - 2.1 2.7 50 AllnGaP on GaAs
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
TLCR5200, TLCY5200
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Reverse voltage (1) VR5V
DC forward current Tamb 85 °C IF50 mA
Surge forward current tp 10 μs IFSM 1A
Power dissipation PV135 mW
Junction temperature Tj125 °C
Operating temperature range Tamb - 40 to + 100 °C
Storage temperature range Tstg - 40 to + 100 °C
Soldering temperature t 5 s, 2 mm from body Tsd 260 °C
Thermal resistance junction/ambient RthJA 300 K/W
TLCR5200, TLCY5200
www.vishay.com Vishay Semiconductors
Rev. 1.4, 24-Apr-13 2Document Number: 81354
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) In one packing unit IVmax./IVmin. 2.0
Note
(1) In one packing unit IVmax./IVmin. 2.0
Note
• Luminous intensity is tested at a current pulse duration of 25 ms.
The type numbers represent the order groups which include only
a few brightness groups. Only one group will be shipped on each
bag (there will be no mixing of two groups on each bag).
In order to ensure availability, single brightness groups will not
be orderable.
In a similar manner for colors where wavelength groups are
measured and binned, single wavelength groups will be shipped
in any one bag.
In order to ensure availability, single wavelength groups will not
be orderable.
Note
• Wavelengths are tested at a current pulse duration of 25 ms.
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLCR5200, RED
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity (1) IF = 50 mA TLCR5200 IV1350 4000 - mcd
Dominant wavelength IF = 50 mA d611 616 622 nm
Peak wavelength IF = 50 mA p- 622 - nm
Spectral bandwidth at
50 % Irel max. IF = 50 mA -18-nm
Angle of half intensity IF = 50 mA -± 15- deg
Forward voltage IF = 50 mA VF-2.12.7V
Reverse voltage IR = 10 μA VR5--V
Temperature coefficient of VFIF = 50 mA TCVF -- 3.5-mV/K
Temperature coefficient of dIF = 50 mA TCd-0.05-nm/K
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLCY5200, YELLOW
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity (1) IF = 50 mA TLCY5200 IV1350 4000 - mcd
Dominant wavelength IF = 50 mA d585 590 597 nm
Peak wavelength IF = 50 mA p- 593 - nm
Spectral bandwidth at
50 % Irel max. IF = 50 mA -17-nm
Angle of half intensity IF = 50 mA -± 15- deg
Forward voltage IF = 50 mA VF-2.12.7V
Reverse voltage IR = 10 μA VR5--V
Temperature coefficient of VFIF = 50 mA TCVF -- 3.5-mV/K
Temperature coefficient of dIF = 50 mA TCd-0.1-nm/K
LUMINOUS INTENSITY CLASSIFICATION
GROUP LIGHT INTENSITY (mcd)
STANDARD MIN. MAX.
FF 1350 2700
GG 1800 3600
HH 2400 4800
II 3200 6400
KK 4300 8600
LL 5750 11 500
MM 7500 15 000
NN 10 000 20 000
PP 13 500 27 000
QQ 18 000 36 000
RR 24 000 48 000
SS 32 000 64 000
TT 43 000 86 000
UU 57 500 115 000
COLOR CLASSIFICATION
GROUP
DOM. WAVELENGTH (nm)
YELLOW RED
MIN. MAX. MIN. MAX.
0 585 588
1 587 591 611 618
2 589 594 614 622
3 592 597
TLCR5200, TLCY5200
www.vishay.com Vishay Semiconductors
Rev. 1.4, 24-Apr-13 3Document Number: 81354
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Forward Current vs. Ambient Temperature
Fig. 2 - Relative Intensity vs. Wavelength
Fig. 3 - Relative Intensity vs. Angular Displacement
Fig. 4 - Relative Intensity vs. Wavelength
Fig. 5 - Forward Current vs. Forward Voltage
Fig. 6 - Relative Luminous Flux vs. Forward Current
0
10
20
30
40
50
60
0 20 40 60 80 100 120
T
amb
- Ambient Temperature (°C)
16710
yellow
red
I
F
- Forward Current (mA)
0.0
0.2
0.4
0.6
0.8
1.0
1.2
570 590 610 630 650 670
λ- Wavelength (nm)
16007
I
rel.
- Relative Luminous Intensity
red
17534
0.4 0.2 0 0.2 0.4 0.6
0.6
0.9
0°
30°
10° 20°
40°
50°
60°
70°
80°
1.0
0.8
0.7
I
V rel
- Relative Luminous Intensity
0
0.2
0.4
0.6
0.8
1.0
1.2
540 560 580 600 620 640
λ - Wavelength (nm)
16008
I
V rel.
- Relative Luminous Intensity
yellow
0
20
40
60
80
100
1.5 1.7 1.9 2.1 2.3 2.5
V
F
- Forward Voltage (V)
15974
I
F
- Forward Current (mA)
red
yellow
0.01
0.1
1
10
1 10 100
I
F
- Forward Current (mA)
15978
I
V rel
- Relative Luminous Intensity
red
TLCR5200, TLCY5200
www.vishay.com Vishay Semiconductors
Rev. 1.4, 24-Apr-13 4Document Number: 81354
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 7 - Relative Luminous Flux vs. Forward Current
PACKAGE DIMENSIONS in millimeters
0.01
0.1
1
10
1 10 100
I
F
- Forward Current (mA)
15979
yellow
I
V rel
- Relative Luminous Intensity
14339
(4.3)
12.1 ± 0.3
AC
35.1 ± 0.55
< 0.7
1.1 ± 0.25
0.5 + 0.15
- 0.05
Ø 5 ± 0.15
2.54 nom.
0.5 + 0.15
- 0.05
Ø 5.8 ± 0.15
8.7 ± 0.3
7.7 ± 0.15
1 min.
R 2.49 (sphere)
Drawing-No.: 6.544-5258.07-4
Area not plane
specifications
according to DIN
technical drawings
Issue: 4; 19.05.09
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
