S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide Doc. No. 002-08764 Rev. *A Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 http://www.cypress.com Copyrights Copyrights (c) Cypress Semiconductor Corporation, 2015-2016. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in lifesupport systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Trademarks All other trademarks or registered trademarks referenced herein are property of the respective corporations. Source Code Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign), United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress' product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 2 Preface This manual explains how to use the evaluation board. Be sure to read this manual before using the product. For this product, please consult with sales representatives or support representatives. Handling and Use Handling and use of this product and notes regarding its safe use are described in the manuals. Follow the instructions in the manuals to use this product. Keep this manual at hand so that you can refer to it anytime during use of this product. Notice on this Document All information included in this document is current as of the date it is issued. Such information is subject to change without any prior notice. Please confirm the latest relevant information with the sales representatives . S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 3 Cautions Caution of the Products Described in this Document The following precautions apply to the product described in this manual. WARNING Indicates a potentially hazardous situation which could result in death or serious injury and/or a fault in the user's system if the product is not used correctly. Electric Shock, Before performing any operation described in this manual, turn off all the power supplies to the system. Damage Electric Shock, Damage CAUTION Cuts, Damage Performing such an operation with the power on may cause an electric shock or device fault. Once the product has been turned on, do not touch any metal part of it. Doing so may cause an electric shock or device fault. Indicates the presence of a hazard that may cause a minor or moderate injury, damages to this product or devices connected to it, or may cause to lose software resources and other properties such as data, if the device is not used appropriately. Before moving the product, be sure to turn off all the power supplies and unplug the cables. Watch your step when carrying the product. Do not use the product in an unstable location such as a place exposed to strong vibration or a sloping surface. Doing so may cause the product to fall, resulting in an injury or fault. The product contains sharp edges that are left unavoidably exposed, such as jumper plugs. Cuts Damage Handle the product with due care not to get injured with such pointed parts. Do not place anything on the product or expose the product to physical shocks. Do not carry the product after the power has been turned on. Doing so may cause a malfunction due to overloading or shock. Damage Since the product contains many electronic components, keep it away from direct sunlight, high temperature, and high humidity to prevent condensation. Do not use or store the product where it is exposed to much dust or a strong magnetic or electric field for an extended period of time. Inappropriate operating or storage environments may cause a fault. Use the product within the ranges given in the specifications. Damage Operation over the specified ranges may cause a fault. Damage To prevent electrostatic breakdown, do not let your finger or other object come into contact with the metal parts of any of the connectors. Before handling the product, touch a metal object (such as a door knob) to discharge any static electricity from your body. S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 4 Cautions Damage When turning the power on or off, follow the relevant procedure as described in this document. Before turning the power on, in particular, be sure to finish making all the required connections. Furthermore, be sure to configure and use the product by following the instructions given in this document. Using the product incorrectly or inappropriately may cause a fault. Damage Always turn the power off before connecting or disconnecting any cables from the product. When unplugging a cable, unplug the cable by holding the connector part without pulling on the cable itself. Pulling the cable itself or bending it may expose or disconnect the cable core, resulting in a fault. Damage Because the product has no casing, it is recommended that it be stored in the original packaging. Transporting the product may cause a damage or fault. Therefore, keep the packaging materials and use them when re-shipping the product. S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 5 Contents 1. Description ..................................................................................................................................................................... 7 2. Evaluation Board Specification .................................................................................................................................... 8 3. PIN Descriptions ............................................................................................................................................................ 9 3.1 3.2 4. Setup............................................................................................................................................................................. 12 4.1 4.2 5. Input/OutputDescriptions ....................................................................................................................................... 9 JumperDescriptions ............................................................................................................................................. 11 Connecting .......................................................................................................................................................... 12 Verification ........................................................................................................................................................... 13 Layout ........................................................................................................................................................................... 14 5.1 5.2 Component Layout .............................................................................................................................................. 14 Wiring Layout ....................................................................................................................................................... 14 6. Circuit Schematic ........................................................................................................................................................ 16 7. Component List ........................................................................................................................................................... 17 8. Ordering Information ................................................................................................................................................... 19 Revision History ................................................................................................................................................................... 20 Document Revision History ........................................................................................................................................... 20 S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 6 1. Description S6SBP401AJ0SA1001 and S6SBP401AM2SA1001 are the evaluation kit for power block of automotive ADAS platform. These boards implement S6BP401A of power management IC. It is necessary to prepare DC power supply. Figure 1-1. Board Outline S6SBP401AJ0SA1001 S6SBP401AM2SA1001 DC Power Supply +5V 5V S6BP401A : PMIC CN_VIN DC/DC Converter DD1 EN1 EN2 CN2 EN3 EN4 CN_VOUT1 VOUT1 1.250V / 2A DD2 CN_VOUT2 VOUT2 1.250V / 3A: S6SBP401AJ0SA1001 1.125V / 3A: S6SBP401AM2SA1001 DD3 CN_VOUT3 VOUT3 1.850V / 2A: S6SBP401AJ0SA1001 2.550V / 2A: S6SBP401AM2SA1001 DD4 CN_VOUT4 VOUT4 3.375V / 1A CN_VOUTL1 VOUTL1 3.300V / 0.2A: S6SBP401AJ0SA1001 3.325V / 0.2A: S6SBP401AM2SA1001 CN_VOUTL2 VOUTL2 2.800V / 0.5A LDO ENL1 ENL2 WDI LDO1 LDO2 WatchDog Power Good RST PG1 PG2 PG3 PG4 PGL2 S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 7 2. Evaluation Board Specification Table 2-1. Evaluation Board Specification Item Input Voltage Min. Typ. Max. Unit VIN 4.5 5.0 5.5 V VOUT1 - 1.250 - V VOUT2 - 1.250 - V VOUT3 - 1.850 - V VOUT4 - 3.375 - V VOUTL1 - 3.300 - V VOUTL2 - 2.800 - V VOUT1 - 1.250 - V VOUT2 - 1.125 - V VOUT3 - 2.550 - V VOUT4 - 3.375 - V VOUTL1 - 3.325 - V VOUTL2 - 2.800 - V IOUT1 - - 2.0 A IOUT2 - - 3.0 A S6SBP401AJ0SA1001 IOUT3 - - 2.0 A S6SBP401AM2SA1001 IOUT4 - - 1.0 A IOUTL1 - - 0.2 A IOUTL2 - - 0.5 A S6SBP401AJ0SA1001 Output Voltage S6SBP401AM2SA1001 Output Current Symbol S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 8 3. PIN Descriptions 3.1 Input/OutputDescriptions Table 3-1. Input/OutputDescriptions ConnecterSymbol CN_VIN CN_VOUT1 CN_VOUT2 CN_VOUT3 CN_VOUT4 CN_VOUTL1 CN_VOUTL2 CN1 CN2 CN3 I/O Function Description VIN I +5Vdc power supply terminal GND - Ground terminal VOUT1 O CH1 DC/DC convertor output terminal GND - Ground terminal VOUT2 O CH2DC/DC convertor output terminal GND - Ground terminal VOUT3 O CH3DC/DC convertor output terminal GND - Ground terminal VOUT4 O CH4DC/DC convertor output terminal GND - Ground terminal VOUTL1 O CH1 LDO output terminal GND - Ground terminal VOUTL2 O CH2 LDO output terminal GND - Ground terminal SYNC I WDI I RST O NC - - EN1, EN2, EN3, EN4 I CH1 -CH4 DC/DC convertor enable terminal ENL1, ENL2 I CH1,CH2 LDO enable terminal PG1, PG2, PG3, PG4 O CH1 -CH4 DC/DC convertor power good terminal PGL2 O CH1,CH2 LDO power good terminal VCCPullUP I Voltage supply terminal for the pull up resistors of the power good External clock input terminal. Please use by referring to the data sheet of S6BP401A. Trigger input terminal of watchdog timer. Please use by referring to the data sheet of S6BP401A. Reset output terminal of watchdog timer. Please use by referring to the data sheet of S6BP401A. S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 9 PIN Descriptions Figure 3-1. Pin Layout CN_VOUT1 GND VOUT1 CN_VOUT2 VOUT2 GND GND CN_VIN VOUTL1 CN_VOUTL1 VIN GND CN3 PG1 PG2 PG3 PG4 PGL2 VCCPullUp EN1 EN2 EN3 EN4 ENL1 ENL2 VOUTL2 CN2 NC CN_VOUTL2 GND RST CN1 WDI SYNC GND VOUT3 GND VOUT4 CN_VOUT4 CN_VOUT3 S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 10 PIN Descriptions 3.2 JumperDescriptions Table 3-2. Jumper Descriptions Jumper Description Initial Setting Shorted between VIN and EN1 JP1 JP1Short: EN1 pin is set to the H level. JP1Open: EN1 pin isset to the L level. Input external signal to EN1 pin. Open Don'tinputexternal signal to EN1 pin with shorted JP1. Shorted between VIN and EN2 JP2 JP2 Short: EN2 pin is set to the H level. JP2 Open: EN2 pin isset to the L level. Input external signal toEN2pin. Open Don't inputexternal signal to EN2pin with shorted JP2. Shorted between VIN and EN3 JP3 JP3 Short: EN3 pin is set to the H level. JP3 Open: EN3 pin isset to the L level. Input external signal toEN3pin. Open Don't inputexternal signal to EN3pin with shorted JP3. Shorted between VIN and EN4 JP4 JP4 Short: EN4 pin is set to the H level. JP4 Open: EN4 pin isset to the L level. Input external signal toEN4pin. Open Don't inputexternal signal toEN4pin with shorted JP4. Shorted between VIN and ENL1 JP5 JP5 Short: ENL1 pin is set to the H level. JP5 Open: ENL1 pin isset to the L level. Input external signal toENL1 pin. Open Don't inputexternal signal to ENL1 pin with shorted JP5. Shorted between VIN and ENL2 JP6 JP6 Short: ENL2 pin is set to the H level. JP6 Open: ENL2 pin isset to the L level. Input external signal toENL2pin. Open Don't inputexternal signal toENL2pin with shorted JP6. JP7 Shorted VIN or VOUTL1 to power good pin through resistor. Open JP7Short: Shorted between VOUTL1andpower good pin through resistor. JP8Short: Shorted between VINandpower good pin through resistor. JP8 JP9 JP7 and JP8 must not be shorted simultaneously. Shorted VIN or VOUT4 to PVCCL2 of IC 37 pin. Short Short JP9 Short: Shorted between VINandPVCCL2. JP14 Short: Shorted between VOUT4andPVCCL2. JP14 JP9 and JP14 must not be shorted simultaneously. Open S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 11 4. Setup 4.1 Connecting 1. Connect the board to the power supply, load equipment and voltage meter as below. Figure 4-1. Connectingthe Board and Some Equipment VOUT1 Load + Voltage Meter + VOUT2 Voltage Meter + Load + Voltage Meter + + +5V Power Supply VIN pin VOUTL1 Load EN1 + EN2 EN3 + Load VOUTL2 Voltage Meter Enable pin EN4 - ENL1 + ENL2 - + Load VOUT4 + Voltage Meter + Voltage Meter + Load VOUT3 S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 12 Setup 4.2 Verification 1. Turn on +5V power supply. 2. Connect some enable pin to VIN, then, each DC/DC (or LDO) channel will start output. 3. Check that each output voltage is the same as the 'Output Voltage' ofFigure 2-1 Evaluation Board Specification. S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 13 5. Layout 5.1 Component Layout Figure 5-1. Evaluation Board Component Layout Layer1 Top View Layer4Top View Board size: 45.72mm x30.48mm 5.2 Wiring Layout S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 14 Layout Figure 5-2. Evaluation Board Wiring Layout layer 1 Top View layer 2 Top View layer 3 Top View layer 4 Top View S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 15 6. Circuit Schematic Figure 6-1. Evaluation Board Circuit Schematic M1 30 FB1 VOUT1 VIN PVCC1 29 C35 C1 L1 LX1 28 VOUT1 C40 C2 C3 C6 PGND1 27 CN_VOUT1 VOUT1 VIN 20 FB2 VOUT2 PVCC2a 21 PVCC2b 22 C36 C7 L2 LX2a 23 LX2b 24 PGND2a 25 PGND2b 26 VOUT2 C41 C8 C9 C10 C14 CN_VOUT2 VOUT2 VIN 9 FB3 VOUT3 PVCC3 8 C37 C15 L3 LX3 7 VOUT3 C42 C16 C17 C20 PGND3 6 CN_VOUT3 VOUT3 VIN 2 FB4 VOUT4 PVCC4 3 C38 C21 L4 LX4 4 VOUT4 C43 VIN C22 C23 C26 PGND4 5 JP6 JP5 JP4 JP3 JP2 JP1 CN_VOUT4 VOUT4 CN2 1 19 EN1 2 18 EN2 3 17 EN3 4 16 EN4 5 15 ENL1 6 14 ENL2 VIN PVCCL1 36 C27 LDO1 35 C28 VOUTL1 CN_VOUTL1 VOUTL1 JP14 VOUT4 VIN 34 VCC VIN CN_VIN C33 PVCCL2 37 C27 LDO2 38 JP9 C31 1 CN_VOUTL2 VIN VOUTL2 VOUTL2 2 JP7 VOUTL1 3 4 32 VREG JP8 C34 VIN R10 R9 R8 R7 R6 R5 CN3 42 CP1 PG1 33 PG2 31 1 PG3 10 PG4 1 3 PGL2 40 5 2 4 6 43 CP2 44 CP3 45 CP4 39 GND EP CN1 SYNC 11 WDI 12 1 RST 13 3 2 4 S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 16 7. Component List Table 7-1. Evaluation Board Component List No. Component Parts Number Vendor Value Rated Rated Voltage(V) Current(A) Remarks 1 C1 CGA5L1X7R1C106K160AC TDK 10F 16 - - 2 C2 CGA6P1X7R1C226M250AC TDK 22F 16 - - 3 C3 CGA6P1X7R1C226M250AC TDK 22F 16 - - 4 C6 CGA2B3X7R1H104K050BB TDK 0.1F 50 - - 5 C7 CGA5L1X7R1C106K160AC TDK 10F 16 - - 6 C8 CGA6P1X7R1C226M250AC TDK 22F 16 - - 7 C9 CGA6P1X7R1C226M250AC TDK 22F 16 - - 8 C10 CGA6P1X7R1C226M250AC TDK 22F 16 - - 9 C14 CGA2B3X7R1H104K050BB TDK 0.1F 50 - - 10 C15 CGA5L1X7R1C106K160AC TDK 10F 16 - - 11 C16 CGA6P1X7R1C226M250AC TDK 22F 16 - - 12 C17 CGA6P1X7R1C226M250AC TDK 22F 16 - - 13 C20 CGA2B3X7R1H104K050BB TDK 0.1F 50 - - 14 C21 CGA5L1X7R1C106K160AC TDK 10F 16 - - 15 C22 CGA6P1X7R1C226M250AC TDK 22F 16 - - 16 C23 CGA6P1X7R1C226M250AC TDK 22F 16 - - 17 C26 CGA2B3X7R1H104K050BB TDK 0.1F 50 - - 18 C27 CGA3E1X7R1C105M080AC TDK 1F 16 - - 19 C28 CGA3E1X7R1C105M080AC TDK 1F 16 - - 20 C30 CGA3E1X7R1C105M080AC TDK 1F 16 - - 21 C31 CGA5L1X7R1C106K160AC TDK 10F 16 - - 22 C33 CGA3E1X7R1C105M080AC TDK 1F 16 - - 23 C34 CGA3E1X7R1C105M080AC TDK 1F 16 - - 24 C35 CGA2B3X7R1H104K050BB TDK 0.1F 50 - - 25 C36 CGA2B3X7R1H104K050BB TDK 0.1F 50 - - 26 C37 CGA2B3X7R1H104K050BB TDK 0.1F 50 - - 27 C38 CGA2B3X7R1H104K050BB TDK 0.1F 50 - - 28 C40 CGA2B3X7R1H104K050BB TDK 0.1F 50 - - S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 17 Component List No. Component Parts Number Vendor Value Rated Rated Voltage(V) Current(A) Remarks 29 C41 CGA2B3X7R1H104K050BB TDK 0.1F 50 - - 30 C42 CGA2B3X7R1H104K050BB TDK 0.1F 50 - - 31 C43 CGA2B3X7R1H104K050BB TDK 0.1F 50 - - 32 L1 CLF6045T-1R5N-D TDK 1.5H - 4.2 - 33 L2 CLF6045T-1R5N-D TDK 1.5H - 4.2 - 34 L3 CLF6045T-1R5N-D TDK 1.5H - 4.2 - 35 L4 CLF6045T-1R5N-D TDK 1.5H - 4.2 S6SBP40 1AJ0SA10 01 S6BP401AJ0SN1B000 36 M1 Cypress - - - S6BP401AM2SN1B000 S6SBP40 1AM2SA1 001 37 R5 RG1608P-473-B SSM 47k - - - 38 R6 RG1608P-473-B SSM 47 k - - - 39 R7 RG1608P-473-B SSM 47 k - - - 40 R8 RG1608P-473-B SSM 47 k - - - 41 R9 RG1608P-473-B SSM 47 k - - - 42 R10 RG1608P-473-B SSM 47 k - - - TDK : TDK Corporation Cypress : Cypress Semiconductor Corp SSM : SUSUMU CO., LTD. NMT : No mount. These components are compliant with RoHS, and please ask each vendor for details if necessary. S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 18 8. Ordering Information Table 8-1. Ordering Information Part Number EVB Revision Note S6SBP401AJ0SA1001 S6SBP401A-SA1 Mounted IC: S6BP401AJ0SN1B000 S6SBP401AM2SA1001 Rev 2.0 Mounted IC: S6BP401AM2SN1B000 S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 19 Revision History Document Revision History Document Title: S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide Document Number: 002-08764 Revision Issue Date Origin of Description of Change Change ** 09/11/2015 TAOA Initial release *A 02/05/2016 TAOA Migrated Spansion Guide from S6SBP401AJ0SA1001_SS901-00045-1v0-E to Cypress format S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 20