SmartConnect SAM B11
BLE 4.1 Wireless MCU
The Atmel® SmartConnect SAM B11 is an ultra-low-power Bluetooth® SMART (BLE 4.1) system on a chip (SoC) with
integrated microcontroller (MCU), transceiver, modem, MAC, PA, TR switch, and power management unit (PMU). It is
a standalone applications processor with 256KB of Flash memory and with embedded BLE connectivity.
The qualified Bluetooth Smart protocol stack is stored in dedicated ROM and includes L2CAP service layer protocol, security
manager, attribute protocol (ATT), generic attribute profile (GATT) and the generic access profile (GAP). Additionally,
application profiles such as Proximity, Thermometer, Heart Rate, Blood Pressure, and many others are supported and
included in the protocol stack.
The SAM B11 provides a cost-effective solution for
many Bluetooth Smart based applications by integrating
the Bluetooth Low Energy Radio and Baseband with
an ARM® Cortex® M0-based microcontroller. The need
for very few external components minimizes the total
system solution cost.
Accelerating RF Design
To help accelerate design development, Atmel offers the
SAM B11 as a single-chip module for fast integration,
and on an Xplained Pro evaluation board for fast and easy
application development within Atmel Studio.
Power Architecture and Consumption
The SAM B11 uses an innovative radio and DSP
architecture that delivers extremely low power
consumption along with high performance.
The SAM B11 has the lowest power consumption
available in the market.
• TX peak current: < 3mA @ 3.6V, 0dBm pout
• RX peak current: < 4mA @ 3.6V
• Sleep current: < 1uA with 8KB RAM retention
and RTC
• Advertise: > 4-year battery life with CR2032 coin cell
battery when advertising every 1-second as a beacon
SAM B11 SoC Target Applications
• Wearable with health and fitness sensors
• Smart appliances
• Security and proximity tags
• Home automation
• Smartphone accessories
• HID keyboards, mice and remote controls
© 2015 Atmel Corporation. / Rev.: Atmel-45139B-SmartConnect-SAM-B11_E_US_092015
Atmel,® Atmel logo and combinations thereof, Enabling Unlimited Possibilities,® and others are registered trademarks or trademarks of Atmel Corporation in U. S. and other
countries. ARM,® ARM Connected® logo and others are the registered trademarks or trademarks of ARM Ltd. Other terms and product names may be trademarks of others.
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel
products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RE-
LATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE
THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to
make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall
not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
Atmel Corporation 1600 Technology Drive, San Jose, CA 95110 USA T : (+1)(408) 441. 0311 F : (+1)(408) 436. 4200 | www.atmel.com
SmartConnect SAM B11
BLE 4.1 Wireless MCU
Ordering Code Description
Atmel SAMB11G18A-MU-T Cortex M0 with 256KB of stacked Flash and BLE 4.1, 6x6 QFN
Atmel ATSAMB11-MR210CA Certified Module with ATSAMB11A-MU chip and chip antenna
Atmel ATSAMB11-MR510CA Certified Module with SAMB11 Soc, chip antenna and Crypto memory ECC508A
Atmel ATSAMB11-XPRO Starter kit with XPlained Pro SAM B11 board, demonstrating BLE health thermometer application
with LED control and temperature measurements
Key Features
• BLE4.1 SoC with fully embedded stack (link and host layer,
including ATT/GATT/GAP) in ROM (128KB)
• Cortex M0-based MCU with 128KB RAM and 256KB Flash
(stacked die with SPI interface)
• Onboard ADC (11b) and PWM generator and general purpose
timers
• Superior sensitivity (-96dBm) and range (TX pout = 4dBm max)
• Ultra-low power Consumption in advertising, connection,
scanning modes
• SPI, UART and I2C as host interfaces
• Integrated PMU with buck DC/DC allows for vbat range of
2.3V-3.6V
