DC/DC Converters TEN 6WIN Series, 6 Watt CB Features Wide 4:1 input voltage range High efficiency Operating temperature range Scheme IEC 60950-1 UL 60950-1 IEC 62368-1 UL 62368-1 -40C to +85C No minimum load required Models with 1'500 VDC and 3'000 VDC I/O isolation (functional insulation) Input filter meets EN 55022, class A Overload protection DIP-24 plastic package Industry standard pinout 3-year product warranty The TEN-6WIN series is designed for an optimized cost/performance ratio of DC/DC converters with output power of 6 Watt. General features like no minimum load requirement, overload protection, internal filter for EN55022 class A and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Models Order code Input voltage Output voltage Output current range Efficiency typ. max. 1`500 VDC isolation 3`000 VDC isolation TEN 6-2410WIN TEN 6-2410WIN-HI 3.3 VDC 1200 mA 77 % TEN 6-2411WIN TEN 6-2411WIN-HI 5 VDC 1200 mA 80 % TEN 6-2412WIN TEN 6-2412WIN-HI 12 VDC 500 mA 84 % TEN 6-2413WIN TEN 6-2413WIN-HI 9 - 36 VDC 15 VDC 400 mA 84 % TEN 6-2415WIN TEN 6-2415WIN-HI (24 VDC nominal) 24 VDC 250 mA 84 % TEN 6-2421WIN TEN 6-2421WIN-HI 5 VDC 500 mA 80 % TEN 6-2422WIN TEN 6-2422WIN-HI 12 VDC 250 mA 84 % TEN 6-2423WIN TEN 6-2423WIN-HI 15 VDC 200 mA 84 % TEN 6-4810WIN TEN 6-4810WIN-HI 3.3 VDC 1200 mA 77 % TEN 6-4811WIN TEN 6-4811WIN-HI 5 VDC 1200 mA 80 % TEN 6-4812WIN TEN 6-4812WIN-HI 12 VDC 500 mA 84 % TEN 6-4813WIN TEN 6-4813WIN-HI 18 - 75 VDC 15 VDC 400 mA 84 % TEN 6-4815WIN TEN 6-4815WIN-HI (48 VDC nominal) 24 VDC 250 mA 84 % TEN 6-4821WIN TEN 6-4821WIN-HI 5 VDC 500 mA 80 % TEN 6-4822WIN TEN 6-4822WIN-HI 12 VDC 250 mA 84 % TEN 6-4823WIN TEN 6-4823WIN-HI 15 VDC 200 mA 84 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TEN 6WIN Series 6 Watt Input Specifications Input current at no load Input current at full load 24 48 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. Vin, 3.3VDC 24 Vin other Vin, 3.3VDC 48 Vin other models: models: models: models: 215 mA typ. 300 mA typ. 110 mA typ. 150 mA typ. Recommended input fuse (slow blow) 24 Vin models: 1500 mA 48 Vin models: 800 mA Start-up voltage / under voltage shut down 24 Vin models: 9 VDC / 8.5 VDC (or lower) 48 Vin models: 18 VDC / 16 VDC (or lower) Surge voltage (1 sec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise EN 55022 class A Output Specifications Voltage set accuracy 2 % Regulation - Input variation Vin min. to Vin max. - Load variation 0 - 100 % single output models: dual output models balanced load: dual output models 50%/100% unbalanced load: 0.5 % max. 1.2 % max. 1.2 % max. 3.0 % max. Minimum load not required Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) 80 mVp-p max. Dynamic load response (change from 75 % to 100 % load) 3 % peak variation typ. 300 S response time typ. Current limitation 150 % of Iout max. typ., constant power Short circuit protection continuous, automatic recovery Capacitive load 3.3 & 5.0 VDC 12 & 15 VDC 24 VDC dual output models: models: models: models: 470 F max. 100 F max. 47 F max. 100 F max. (each output) General Specifications Temperature ranges - Operating -40C to +85C - Case temperature +100C max. - Storage -50C to +125C Derating 3.3 & 5.0 VDC models: 2.5 %/K above +60C other models: 3.3 %/K above +70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >800`000 h Isolation voltage (input/output, 60 sec., functional insulation) standard models: 1'500 VDC models with suffix -H: 3`000 VDC Isolation capacitance (input/output, 100 KHz, 1 V) 1000 pF typ. Isolation resistance (input/output, 500 VDC) >1`000 M Ohm Altitude during operation 6`000 m max. Switching frequency 330 kHz typ. All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 6WIN Series 6 Watt General Specifications Safety approvals - CSA certificate of compliance CAN/CSA-C22.2 No 60950-1-07, Am 1:2011 ANSI/UL Std No 60950-1, 2nd Ed, AM 1:2011 - CB test certificate IEC 60950-1:2005 2nd Ed, Am 1:2009 EN 60950-1:2006, +A11:2009, +A1:2010, +A12:2011 IEC/EN 62368-1, UL 62368-1 - certification documents www.tracopower.com/overview/ten6win Environmental compliance - Reach www.tracopower.com/info/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU Physical Specifications Casing material non conductive plastic (UL 94V-0-rated) Potting material epoxy (XM-2109 & XY-2110, UL 94V-0-rated) Weight 13.0 g (0.46 oz) Soldering temperature (1.5mm from case for 10 sec.) max. 260C Supporting documents: www.tracopower.com/overview/ten6win Outline Dimensions (0.60) Pin Single Dual 2 -Vin (GND) -Vin (GND) 3 -Vin (GND) -Vin (GND) 9 No pin Common 11 No function -Vout 14 +Vout +Vout 16 -Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) (1.25) 4.1 (0.16) 10.2 (0.40) 31.8 (0.80) 14 2.54 16 15.24 Bottom view 23 22 Pin-Out 11 20.3 9 (0.10) 2 3 4.5 (0.18) 2.54 (0.10) 15.24 (0.60) 5.08 (0.20) Dimensions in [mm], () = Inch Pin diameter o 0.5 0.05 (0.02 0.002) Tolerances 0.25 (0.01) Pin pich tolerances 0.13 (0.0005) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. February 3, 2021 Page 3 of 3