MADL-011012 360 W CW Power Limiter 0.3 - 1.0 GHz Rev. V1 Features Functional Schematic 55.6 dBm CW Power Handling @ +25C 54 dBm CW Power Handling @ +85C 0.2 dB Insertion Loss (400 - 500 MHz) 25 dB Return Loss (400 - 500 MHz) 21 dBm Flat Leakage Power Lead-Free 10.1 x 6.2 x 3.2 mm3 Package RoHS* Compliant Hermetic Seal1 2 1 RFIN RFOUT Description The MADL-011012 is a lead-free surface mount, high power limiter which integrates the equivalent of 20 PIN, Schottky, limiter diodes, capacitors, inductors, and resistors in a compact ceramic package. This device provides superior low and high signal performance from 0.3 - 1.0 GHz without DC bias. 3 Top view Pin Configuration The MADL-011012 is ideally suitable for higher peak and CW power receiver-protector microwave circuits applications where higher performance surface mount limiter assemblies are required. Ordering Information GND Pin No. Pin Name Description 1 RFIN RF Input 2 RFOUT RF Output 3 Paddle2 Ground 2. The exposed paddle centered on the package bottom must be connected to RF, DC, and thermal ground. Part Number Package MADL-011012-001 bulk MADL-011012-001SMB Sample Test Board 1. Hermetic Seal provides fine leak rate < 5x10-8 atm*cc/s. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADL-011012 360 W CW Power Limiter 0.3 - 1.0 GHz Rev. V1 Electrical Specifications: TA = +25C, Z0 = 50 (unless otherwise defined) Parameter Test Conditions Units Min. Typ. Max. Insertion Loss -10 dBm, 300 MHz -10 dBm, 500 MHz -10 dBm, 1000 MHz dB -- -- -- 0.25 0.20 0.55 -- 0.35 -- Return Loss 10 dBm, 300 MHz -10 dBm, 500 MHz -10 dBm, 1000 MHz dB -- -- -- 20 25 11 -- -- -- P1dB Input Compression Power 500 MHz dBm -- 13 -- CW Incident Power3 500 MHz dBm -- 55.6 -- Peak Incident Power3 1 ms pulse, 10% duty cycle, 500 MHz dBm -- 55.6 -- Flat Leakage Power 1 ms pulse, 10% duty cycle, 500 MHz dBm -- 20 -- Spike Leakage Power +55.6 dBm, 1 ms pulse, 10% duty cycle, 500 MHz dBm -- 29 -- Spike Leakage Energy +55.6 dBm, 1 ms pulse, 10% duty cycle, 500 MHz ergs -- 0.5 -- Recovery Time (3 dB of Insertion Loss) +55.6 dBm, 1 ms pulse, 10% duty cycle, 500 MHz s -- 3 -- Input 3rd Order Intermodulation (IIP3) -10 dBm, F1 = 500 MHz, F2 = 510 MHz dBm -- 29 -- 3. Incident power ratings defined with 1.2:1 source VSWR and 1.2:1 maximum load VSWR. Absolute Maximum Ratings4,5 Typical Performance Curve Pulse Width vs. Peak Input Power @ +85C (10% Duty Cycle, 500 MHz) Absolute Maximum Peak Incident Power 2 ms pulse, 10% duty @ +85C 55.6 dBm 6 CW Incident Power @ +85C 54 dBm 5 Junction Temperature6 175C Operating Temperature -65C to +125C Storage Temperature -65C to +150C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 6. Operating at nominal conditions with TJ +175C will ensure MTTF > 1 x 106 hours. RF Pulse Width (ms) Parameter 4 3 2 1 0 54 55 56 Peak Incident Power (dBm) 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 57 MADL-011012 360 W CW Power Limiter 0.3 - 1.0 GHz Rev. V1 Typical Performance Curves Insertion Loss vs. Frequency Input Return Loss vs. Frequency 0.0 0 -10 -0.2 S11 (dB) S21 (dB) -0.1 -0.4 -20 -30 -0.5 -0.6 0.3 0.4 0.5 0.6 0.7 0.8 0.9 -40 0.3 1.0 0.4 0.5 Frequency (GHz) Pulsed Flat Leakage Power vs. PIN 25 20 20 Output Power (dBm) Output Power (dBm) 25 15 10 15 25 35 45 1.0 15 25 35 45 55 Input Power (dBm) Pulsed 1 dB Recovery Time vs. PIN (1 ms Pulse, 10% Duty Cycle, 500 MHz) (1 ms Pulse, 10% Duty Cycle, 500 MHz) 5 1 dB Recovery Time (s) 30 Spike Leakage Power (dBm) 0.9 10 5 55 Pulsed Spike Leakage Power vs. PIN 3 0.8 15 Input Power (dBm) 28 26 24 22 20 0.7 CW Flat Leakage Power vs. PIN @ 500 MHz (1 ms Pulse, 10% Duty Cycle, 500 MHz) 5 0.6 Frequency (GHz) 45 47 49 51 Input Power (dBm) 53 55 4 3 2 1 0 45 47 49 51 53 Input Power (dBm) M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 55 MADL-011012 360 W CW Power Limiter 0.3 - 1.0 GHz SMB Layout Rev. V1 SMB Layout Part Quantity Part Number RF Connector 2 Johnson 142-0701-851 Limiter 1 MADL-011012 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity These devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these HBM Class 1B devices. Lead-Free 10.1 x 6.2 x 3.2 mm3 2-Lead package NOTES: REFERENCE JEDEC MO-153-AB FOR ADDITIONAL DIMENSIONAL AND TOLERANCE INFORMATION. ALL DIMENSIONS SHOWN AS INCHES/MM. Reference Application Note S2083 for lead-free solder reflow recommendations. Plating is Au over Ni over Cu. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADL-011012 360 W CW Power Limiter 0.3 - 1.0 GHz Rev. V1 Application Section Transmit-Receive Block Diagram using the UHF Band MADL-011012 Limiter Ant Circulator Circulator LNA PA 50 High Power Load MADL-011012 Limiter 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADL-011012 360 W CW Power Limiter 0.3 - 1.0 GHz Rev. V1 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support