…...………………..……………………………………………………………………………………………………………………………………………
…...………………..……………………………………………………………………………………………………………………………………………
Fujian Lilliput Optoelectronics Technology Co., Ltd
1. XDS3204AE introduce 14 bits hardware ADC, the precision is 64 times against other oscilloscope on market.
Equipping with OWON’s original magnifier function, it can observe the signal low down to 31.25μV/div.
2. platform - restore the waveform detail fully
3. multi-level grayscale, and color temperature display
+ 200MHz Bandwidth，1GS/s sample rate
+ 14-bit high resolution ADC
+ 40M record length 70,000 wfms/s waveform refresh rate
+ low back ground noise
+ 8 inch 800 x 600 multi-touch LCD, more user-friendly operation
experience
+ SCPI, and LabVIEW supported
+ multi- trigger, and bus decoding function
+ multi-interface integration - USB host, USB device, USB port for
PictBridge, LAN, AUX, and VGA
XDS3204AE 4CH DSO
…...………………..……………………………………………………………………………………………………………………………………………
…...………………..……………………………………………………………………………………………………………………………………………
Fujian Lilliput Optoelectronics Technology Co., Ltd
4. multi-trigger supported - Logic, Time-out, I2C, SPI，
RS232, Runt, Windows, Nth Edge, and CAN
5. serial bus coding available in I2C, SPI, RS232, and CAN
7. its built-in WiFi module facilitates mobile device
connecting with XDS seris product, to get access
to remote control, together with simultaneous
measurement result display
via app s/w, waveform data-saving,checking,
co-sharing is possible, co-analyzing hence realizes
10. optional battery makes floating measurement possible,
advancing the operation convenience
8. Its multi-point touch function improves operation
efficiency considerably
6. built-in multimeter module, with auto-scale,
and data logging function
…...………………..……………………………………………………………………………………………………………………………………………
…...………………..……………………………………………………………………………………………………………………………………………
Fujian Lilliput Optoelectronics Technology Co., Ltd
＋Performance Specifications
Model
XDS3204AE
Bandwidth
200MHz
Sample Rate
1GS/s
Vertical Resolution (A/D))
14 bits
Record length
40M
Waveform Refresh Rate
70,000 wfms/s
Horizontal Scale (s/div))
2ns/div - 1000s/div, step by 1 - 2 - 5
Rise Time (at input, typical)
≤1.7ns
Channel
4
Display
8" color LCD, 800 x 600 pixels display
Input Impedance
1MΩ ± 2%, in parallel with 15pF ± 5pF
Channel Isolation
50Hz : 100 : 1, 10MHz : 40 : 1
Max Input Voltage
1MΩ ≤ 300Vrms;
DC Gain Accuracy
±3%
DC Accuracy
average≥16：±（3% +0.05div) for △V
Probe Attenuation Factor
0.001X - 1000X, step by 1 - 2 - 5
LF Respond (AC, -3dB)
≥5Hz
Sample Rate / Relay Time
Accuracy
±2.5ppm
Interpolation
(sinx) / x，x
Interval (△T) Accuracy
(full bandwidth)
Single: ±(1 interval time + 1ppm x reading + 0.6ns);
Average > 16: ±(1 interval time + 1ppm x reading + 0.4ns)
Input Coupling
DC, AC, GND
Vertical Sensitivity
1mV/div - 10V/div (at input)
Trigger Type
Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, RS232,
and CAN (optional)
Bus Decoding(optional)
I2C, SPI, RS232, CAN
Trigger Mode
Auto, Normal, and Single
Vertical Range
±2V(1mV/div～50mV/div)；±20V(100mV/div～1V/div)；±200V(2V/div～10V/div)
Line / Field Frequency (video)
NTSC, PAL and SECAM standard
Cursor Measurement
△V, and △T between cursors, △V and △T between cursors, and auto- cursors
Automatic Measurement
Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp,
Overshoot, Phase A→B ↑, Phase A→B↓, Preshoot, Rise Time, Fall Time,+Width, -Width, +Duty, -
Duty, Duty Cycle, Delay A→B ↑, Delay A→B↓, +Pulse Count, -Pulse Count, Rise Edge Count, Fall
Edges Count, Area, Cycle Area
Waveform Math
＋, －, ×, ÷, FFT
Waveform Storage
100 waveforms
Lissajou's
Figure
full bandwidth
Full bandwidth
±3 degrees
±3 degrees
Communication Interface
USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN, and VGA (optional)
Frequency Counter
available
Power Supply
100V - 240V AC, 50/60Hz, CAT II
Fuse
2A, T class, 250V
Battery (optional)
3.7V, 13200mA
Dimension (W x H x D)
340mmx177mmx90mm
…...………………..……………………………………………………………………………………………………………………………………………
…...………………..……………………………………………………………………………………………………………………………………………
Fujian Lilliput Optoelectronics Technology Co., Ltd
＋Multimeter (optional) Specifications
Full Scale Reading
3¾ digits (max 4000 count)
Diode
0V -1.5V
Input Impedance
10MΩ
Continuity Test
<50 (±30) beeping
Capacitance
51.2nF - 100uF: ±(3% ± 3 digits)
Voltage
DCV: 400mV, 4V, 400V: ±(1 ± 1 digit); max input: DC 1000V
ACV: 4V, 40V, 400V: ±(1 ± 3 digits); frequency: 40Hz - 400Hz; max input: AC 750V (virtual value)
Current
DCA: 40mA, 400mA: ±(1.5% ± 1 digit); 10A: ±(3% ± 3 digits)
ACA: 40mA: ±(1.5% ± 3 digits), 400mA: ±(2% ± 1 digit), 10A: ±(3% ± 3 digits)
Impedance
400Ω: ±(1% ± 3 digits),4KΩ - 40MΩ: ±(1% ± 1 digit)
＋Optional Module / Function
VGA
VGA+AV port
WIF
Wifi
AWG
1ch 25MHz arb waveform
generator
DMM
digital multimeter
MTS
Touch screen(capacitor-type)
＋Application
electronic circuit debugging circuit testing design and manufacture
education and training automobile maintenance and testing
＋Accessories The accessories subject to final delivery.
Power Cord CD Rom Manual USB Probe Probe Adjust
optional accessories:
Multimeter Q9 Capacitance Battery Soft Bag
Lead Ext Module
＋Standard Decoding Kit
RS232
RS232
SPI
SPI
I2C
I2C
CAN
CAN
Specifications subject to change without prior notice
