T9-711 Thermal (T- and TA-Line) www.schurter.com /PG17_18_19 Circuit Breaker for Equipment thermal, Snap-in rear side, 1 pole Description - Snap-in type from rear side (0.5...3.0mm) Thermal circuit breaker 1pole On request available with elevaled glow-wire ratings Quick connect terminals 6.3 x 0.8 mm Unique Selling Proposition - Reset type Cycling trip-free release Compact design Different mounting possibilities Applications - Designed for standard and medical applications Power supplies Uninterruptible power supply Power tools Industrial appliances HVAC Household appliances Weblinks pdf datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, DistributorStock-Check, Detailed request for product, Product News Standards - Approval Reference Type: T9 -IEC 60934 -UL 1077 -CSA C22.2 No. 235 -GB 17701 Technical Data Rated Voltage AC Rated Voltage DC Rated current Conditional short circuit capacity 240 V, 50 / 60 Hz 48 / 32 V, see approvals 3-16 A, see approbations IEC: Inc, PC1, AC 240 V: 2 kA Ambient temperature Weight 3 A: -5 C to 60 C 4 A: -5C to 50 C 5-16 A: -5 C to 60 C 9 - 13 g UL / CSA: SC, AC 240 V DC 48 / 32 V: 2 kA, C1 Degree of protection front side IP 40 Endurance minimum IEC: 200% Ir, cos 0.6: min. 50 switching cycles Endurance typical 3-8 A: 150% Ir, cos 0.9: 2500 switching cycles 10-16 A: 150% Ir, cos 0.9: 6000 switching cycles Dielectric Strength 1500 VAC Insulation Resistance 500 VDC > 1000 M Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in General Product Information Circuit Breakers 1 T9-711 Thermal (T- and TA-Line) www.schurter.com /PG17_18_19 Dimension [mm] T9-711 o 15.4 0.2 3.4 43.1 10 25 8 5 15.9 -0.1 0.0 o 15.5 11 13.6 0.2 0.0 13.9 -0.1 6.3x0.8 Pannel thickness s =0.5 - 3.0 mm Approval Rated current Rated voltage AC Rated voltage DC UL 1077 3 - 12 A 14 - 16 A 240 V 240 V 48 V 32 V CSA 22.2 235 3 - 12 A 14 - 16 A 240 V 240 V 48 V 32 V IEC 60934 3 - 12 A 14 - 16 A 240 V 240 V 48 V 32 V GB 17701 3 - 12 A 14 - 16 A 240 V 240 V 48 V 32 V Typical internal resistance Rated Current [A] Internal Resistance [m] 3 65.0 4 21.6 5 23.6 6 16.3 7 15.3 8 12.9 10 7.3 12 7.0 14 4.8 15 4.3 16 3.9 2 Circuit Breakers T9-711 Thermal (T- and TA-Line) www.schurter.com /PG17_18_19 Time-Current-Curves [min] [min] [sec] 10'000 [sec] 10'000 T9 T9 5 A -16 A (TC-1) 60 4A (TC-2) 30 20 1'000 10 10 5 5 3 1'000 3 Time in Seconds 100 1 10 100 1 10 1 2 1.35 1.45 1.05 0.1 1 1 3 4 5 6 7 8 0.1 1 10 1.5 Time in Seconds (TC-2) 30 1.05 20 3 A 60 2 Multiple of Rated Current In Multiple of Rated Current In Reference Temperature +23 Reference Temperature +23 3 4 5 6 7 8 10 Effect of ambient temperature The units are calibrated for an ambient temperature of +23C. To determine the rated current for a lower or higher ambient temperature, use a correction factor (typical value) from the table below: Ambient temperature [C] Correction factor -5 0,85 +10 0,95 +23 1,00 +40 1,08 +60 1,21 Example: Rated current = 10 A; Environmental temperature = 60 C; --> Correction factor = 1.21; Resulting current = 12.1 A --> Fount to next higher rated current: 13 A Accessory Part Number Type Resources / Description 4404.0039 TZZ31 Protection cover for IP 65 4400.0420 TZZ11 Knurled nut nickel-plated 4400.0559 TZZ11-414 Knurled nut black 4400.0425 TZZ12 Additional hexagonal nut nickel-plated 4404.0072 TZZ51 Additional hexagonal nut PA 66 Variants Mounting Front printing Rated current Order Number Snap-in mounting from rear side Rated current not printed on front 3.0 A 4404.0057 Snap-in mounting from rear side Rated current not printed on front 4.0 A 4404.0029 Snap-in mounting from rear side Rated current not printed on front 5.0 A 4404.0035 Snap-in mounting from rear side Rated current not printed on front 6.0 4404.0030 Snap-in mounting from rear side Rated current not printed on front 7.0 A 4404.0037 Circuit Breakers 3 T9-711 Thermal (T- and TA-Line) www.schurter.com /PG17_18_19 Mounting Front printing Rated current Order Number Snap-in mounting from rear side Rated current not printed on front 8.0 A 4404.0031 Snap-in mounting from rear side Rated current not printed on front 10.0 A 4404.0032 Snap-in mounting from rear side Rated current not printed on front 12.0 A 4404.0033 Snap-in mounting from rear side Rated current not printed on front 14.0 A 4404.0036 Snap-in mounting from rear side Rated current not printed on front 15.0 A 4404.0038 Snap-in mounting from rear side Rated current not printed on front 16.0 A 4404.0034 Most Popular. Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 100 Pcs 08.06.2017 Packaging Unit 4 Circuit Breakers The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schurter: T9-711C-15 T9-711C-12 T9-711C-10 T9-711C-7 T9-711C-14 T9-711C-6 T9-711C-4 T9-711C-5 T9-711C-8 T9711C-16