on your Raspberry Pi and download project samples!
This pack is certified for use with Microsoft Azure as well as other compatible Azure certified
operating systems.
This pack does NOT come with a Raspberry Pi 3 Computer! Click here for the version with a
Pi.
This pack contains:
Adafruit Raspberry Pi B+ Case - Smoke Base / Clear Top - We think it's the Single Greatest
Raspberry Pi Case Ever - though our Pi Box Plus is also nothing to scoff at.
Full Size Breadboard - In the past, we've used the half-size breadboard for a lot of Pi
projects - but no longer! WIth 40 pins to break out, you're going to need some space - and
that's why we're including a full size breadboard in this pack.
Premium Male/Male Jumper Wires - 20 x 6" (150mm) - These jumper wires are great for
making wire harness or jumpering between headers on PCBs. We include the longer ones so
they work well with the full-size breadboard.
Premium Female/Male 'Extension' Jumper Wires - 20x6" - These jumper wires are handy
equivalents of the male/male jumper wires - but with female connectors.
5V 2.5A Switching Power Supply w/ 6' MicroUSB Cable - The 5V 2.5A power adapter is
the perfect choice for powering your Raspberry Pi B+ with 2 Amps of current output, and an
extra long cord.
Assembled Adafruit BME280 Temperature, Pressure & Humidity sensor - The assembled
verison of an Adafruit Instant Classic. This breakout board has a powerful BME280 sensor
from Bosch that's good for temperature, barometric pressure, AND humidity sensing. This
version comes with headers already soldered on.
Assembled TCS34725 RGB Color Sensor - The assembled version of a longstanding
Adafruit classic. This RGB Color Sensor with IR filter and White LED comes fully assembled -
with headers already soldered on.
MCP3008 - 8 Channel 10-Bit ADC With SPI Interface - Easy to use, SPI enabled chip that's
perfect for adding 8 channels of 10-bit analog input to your microcontroller or microcomputer
project.
Ethernet Cable - 5 foot long - An ethernet cable.
16GB SD/MicroSD Memory Card w/ NOOBS - This SD card comes pre-loaded with NOOBS
which now supports running Windows 10 on your Raspberry Pi 3.
Electronic components
1x Photo Cell
2x Breadboard Trim Potentiometer
5x 10K 5% 1/4W Resistor
5x 560 ohm 5% 1/4W Resistor
2x Diffused 10mm Blue LED
2x Diffused 10mm Red LED
2x Diffused 10mm Green LED
3x 12mm Tactile Switches
May include extras!
You can also use this pack with Raspbian Linux & Python, Here's a few Raspbian-based learn
guides that are worth checking out to start. While they're for the Model B, they will all apply to
the Raspberry Pi Model B+ and the Raspberry Pi 2 and 3.
Introduction to outputs - light up an LED when you get an e-mail
Introduction to inputs - play MP3 audio files when three different buttons are pressed
Introduction to sensors - reading a photo cell sensor with RC timing to detect light changes