1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3025_PMR209 • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
Benets
• Approvals: ENEC, UL, cUL
• Rated voltage: 250 VAC 50/60Hz
• Capacitance range: 0.047 – 0.47 µF
• Capacitance tolerance: ±20%
• Resistancerange:22–470Ω
• Resistance tolerance: ±30%
• Lead Spacing: 15.2 – 25.4 mm
• Climatic category: 40/085/56/B, IEC 60068–1
• Tape & Reel packaging in accordance with IEC 60286–2
• RoHS compliance and lead-free terminations
• Operatingtemperaturerangeof−40°Cto+85°C
Overview
Multilayer metallized paper encapsulated and impregnated
in self-extinguishing material that meets the requirements
of UL 94 V–0.
Applications
For worldwide use in contact protection, contact
interference suppression, and transient suppression.
AC Line EMI Suppression and RC Networks
PMR209, Metallized Impregnated Paper,
Class X2, 250 VAC
Legacy Part Number System
PMR209 M B 5470 M047 R30
Series Rated Voltage
(VAC)
Lead Spacing
(mm)
Capacitance
Code (pF)
Capacitance
Tolerance Resistance(Ω) Packaging
RC Snubber,
Metallized Paper
M = 250 B = 15.2
C = 20.3
E = 25.4
The last three
digits represent
signicantgures.
Therstdigit
speciesthetotal
number of digits.
M = ±20% Resistance Value
inΩ
See Ordering
Options Table
New KEMET Part Number System
P409 Q M 473 M250 AH470
Capacitor
Class Series Lead Spacing
(mm) Size Code Capacitance Code (pF) Capacitance
Tolerance
Rated Voltage
(VAC) Packaging Resistance(Ω)
P=
Metallized
Paper
RC Snubber Q = 15.2
C = 20.3
E = 25.4
See
Dimension
Table
First two digits
representsignicant
gures.Thirddigit
speciesnumberof
zeros.
M = ±20% 250 = 250 See Ordering
Options Table
Hplusrsttwo
digits represent
signicant
gures.Thirddigit
speciesnumber
of zeros.
Not recommended for new design. Replacement series P409 275VAC.
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3025_PMR209 • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR209, Metallized Impregnated Paper, Class X2, 250 VAC
Benets cont'd
• Excellent self-healing properties that ensure long life, even
when subjected to frequent over-voltages
• Good resistance to ionization due to impregnated paper
dielectric
• High dv/dt capability
• Impregnated paper ensures excellent stability and reliability
properties, particularly in applications with continuous
operation
Ordering Options Table
Lead
Spacing
Nominal
(mm)
Type of Leads and Packaging
Lead
Length
(mm)
KEMET
Lead and
Packaging
Code
Legacy
Lead and
Packaging
Code
15.2
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
6+0/−1
C
Bulk (Bag) – Maximum Length Leads
30+5/−0
A
Tape&Reel(StandardReelΦ=360mm)
H0= 18.5 ±0.5
L
20.3
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
6+0/−1
C
Bulk (Bag) – Maximum Length Leads
30+5/−0
A
Tape&Reel(StandardReelΦ=360mm)
H0= 18.5 ±0.5
L
25.4
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
6+0/−1
C
Bulk (Tray) – Maximumn Length Leads
30+5/−0
A
Not recommended for new design. Replacement series P409 275VAC.
3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3025_PMR209 • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR209, Metallized Impregnated Paper, Class X2, 250 VAC
Dimensions – Millimeters
L B
FRONT VIEW SIDE VIEW
H
LL
p
d
Size Code p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
QM
15.2
±0.4
7.3
Maximum
13.0
Maximum
18.5
Maximum
0.8
±0.05
CE
20.3
±0.4
7.6
Maximum
14.0
Maximum
24.0
Maximum
0.8
±0.05
CP
20.3
±0.4
11.3
Maximum
16.5
Maximum
24.0
Maximum
0.8
±0.05
EJ
25.4
±0.4
12.1
Maximum
19.0
Maximum
30.5
Maximum
1.0
±0.05
EL
25.4
±0.4
15.3
Maximum
22.0
Maximum
30.5
Maximum
1.0
±0.05
Note: See the Ordering Options Table for lead length (LL) options.
Not recommended for new design. Replacement series P409 275VAC.
4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3025_PMR209 • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR209, Metallized Impregnated Paper, Class X2, 250 VAC
Performance Characteristics
Rated Voltage 250 VAC 50/60 Hz
Capacitance Range 0.047 – 0.47 µF
Capacitance Tolerance ±20%
Resistance Range 22–470Ω
Resistance Tolerance ±30%
Temperature Range −40°Cto+85°C
Climatic Category 40/085/56/B
Approvals ENEC, UL, cUL
Peak Pulse Voltage 1,000 V
Series Resistance
Theseriesresistanceisdenedat1kHzforRC≥50µsandat
100 kHz for RC < 50 µs
Insulation Resistance
Minimum Values Between Terminals
C≤0.33µF ≥3,000MΩ
C > 0.33 µF ≥1,000MΩ•µF
Pulse Current
Maximum 12 A repetitive. Maximum 20 A peak for occasional
transients.
Test Voltage Between Terminals
The 100% screening factory test is carried out at 1,800 VDC. The
voltage level is selected to meet the requirements in applicable
equipment standards. All electrical characteristics are checked
after the test.
In DC Applications Recommendedvoltage≤630VDC
Power Ratings
Average losses may reach 0.5 W, provided the surface
temperaturedoesnotexceed+85°C.Formaximumpermitted
power dissipation versus temperature, see Derating Curves.
Derating Curves
Maximum Allowable Power Dissipation vs. Ambient
Temperature and Case Sizes.
40
Maximum Allowable Power Dissipation vs
Ambient Temperature & Case Sizes
1 2 3 4 5
0
0.5
50 60 70 80 85 °C
Tamb
Pmax
W
Curve Dimension B (mm)
1
7.3
2
7.6
3
11.3
4
15.3
Not recommended for new design. Replacement series P409 275VAC.
5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3025_PMR209 • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR209, Metallized Impregnated Paper, Class X2, 250 VAC
Environmental Test Data
Test IEC Publication Procedure
Endurance IEC 60384–14
1.25 x V
R
VAC 50 Hz, once every hour increased to 1,000 VAC for
0.1 second, 1,000 hours at upper rated temperature.
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each, 10 – 500 Hz at 0.75 mm or 98 m/s2
Bump IEC 60068–2–29 Test Eb 4,000 bumps at 390 m/s2
Change of Temperature IEC 60068-2-14 Test Na Upper and lower rated temperature 5 cycles
Active Flammability IEC 60384–14 VR+20surgepulsesat2.5kV(pulseevery5seconds)
Passive Flammability IEC 60384–14 IEC60384–1,IEC60695–11–5Needle-ametest
Damp Heat Steady State IEC 60068–2–78 Test Cab +40°Cand93%RH,56days
Approvals
Certication Body Mark Specication File Number
Intertek Semko AB EN/IEC 60384–14 SE/0140–28D
UL UL 60384–14
CAN/CSA–E60384–14–09 E73869
Environmental Compliance
All KEMET EMI capacitors are RoHS compliant.
Not recommended for new design. Replacement series P409 275VAC.
6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3025_PMR209 • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR209, Metallized Impregnated Paper, Class X2, 250 VAC
Table 1 – Ratings & Part Number Reference
Lead
Spacing (p)
Capacitance
Value (µF)
Resistance
(Ω)
Maximum Dimensions in mm New KEMET
Part Number
Legacy
Part Number
B H L
15.2 0.047 47 7.3 13.0 18.5 P409QM473M250(1)H470 PMR209MB5470M047(1)
15.2 0.047 100 7.3 13.0 18.5 P409QM473M250(1)H101 PMR209MB5470M100(1)
20.3 0.1 22 7.6 14.0 24.0 P409CE104M250(1)H220 PMR209MC6100M022(1)
20.3 0.1 33 7.6 14.0 24.0 P409CE104M250(1)H330 PMR209MC6100M033(1)
20.3 0.1 47 7.6 14.0 24.0 P409CE104M250(1)H470 PMR209MC6100M047(1)
20.3 0.1 68 7.6 14.0 24.0 P409CE104M250(1)H680 PMR209MC6100M068(1)
20.3 0.1 100 7.6 14.0 24.0 P409CE104M250(1)H101 PMR209MC6100M100(1)
20.3 0.1 150 11.3 16.5 24.0 P409CP104M250(1)H151 PMR209MC6100M150(1)
20.3 0.1 220 11.3 16.5 24.0 P409CP104M250(1)H221 PMR209MC6100M220(1)
20.3 0.1 330 11.3 16.5 24.0 P409CP104M250(1)H331 PMR209MC6100M330(1)
20.3 0.1 470 11.3 16.5 24.0 P409CP104M250(1)H471 PMR209MC6100M470(1)
20.3 0.22 22 11.3 16.5 24.0 P409CP224M250(1)H220 PMR209MC6220M022(1)
20.3 0.22 33 11.3 16.5 24.0 P409CP224M250(1)H330 PMR209MC6220M033(1)
20.3 0.22 47 11.3 16.5 24.0 P409CP224M250(1)H470 PMR209MC6220M047(1)
20.3 0.22 68 11.3 16.5 24.0 P409CP224M250(1)H680 PMR209MC6220M068(1)
20.3 0.22 100 11.3 16.5 24.0 P409CP224M250(1)H101 PMR209MC6220M100(1)
20.3 0.22 150 11.3 16.5 24.0 P409CP224M250(1)H151 PMR209MC6220M150(1)
20.3 0.22 220 11.3 16.5 24.0 P409CP224M250(1)H221 PMR209MC6220M220(1)
25.4 0.22 330 12.1 19.0 30.5 P409EJ224M250(1)H331 PMR209ME6220M330(1)
25.4 0.22 470 15.3 22.0 30.5 P409EL224M250(1)H471 PMR209ME6220M470(1)
25.4 0.47 33 15.3 22.0 30.5 P409EL474M250(1)H330 PMR209ME6470M033(1)
25.4 0.47 47 15.3 22.0 30.5 P409EL474M250(1)H470 PMR209ME6470M047(1)
25.4 0.47 68 15.3 22.0 30.5 P409EL474M250(1)H680 PMR209ME6470M068(1)
25.4 0.47 100 15.3 22.0 30.5 P409EL474M250(1)H101 PMR209ME6470M100(1)
25.4 0.47 150 15.3 22.0 30.5 P409EL474M250(1)H151 PMR209ME6470M150(1)
25.4 0.47 220 15.3 22.0 30.5 P409EL474M250(1)H221 PMR209ME6470M220(1)
Lead
Spacing (p)
Capacitance
Value (µF) Resistance Ω B (mm) H (mm) L (mm) New KEMET
Part Number
Legacy
Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
Not recommended for new design. Replacement series P409 275VAC.
7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3025_PMR209 • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR209, Metallized Impregnated Paper, Class X2, 250 VAC
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder.
This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a
result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave
temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC).
Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15 mm),
andgreatcaremustbetakenduringsoldering.TherecommendedsolderprolesfromKEMETshouldbeused.ConsultKEMET
with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for
successful soldering. See Figure 1.
Reowsolderingisnotrecommendedforthrough-holelmcapacitors.Exposingcapacitorstoasolderingproleinexcessofthe
recommended limits may result in degradation of or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface-mount components. Insert
through-holepartsaftercuringthesurface-mountparts.ConsultKEMETtodiscusstheactualtemperatureproleintheoven,if
through-hole components must pass through the adhesive curing process. A maximum of two soldering cycles is recommended.
Allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Manual Soldering Recommendations
Following is the recommendation for manual
soldering with a soldering iron.
Soldering iron tip temperature should be set at
350°C(+10°Cmaximum),withthesoldering
duration not to exceed more than 3 seconds.
Recommended Soldering Temperature
0
50
100
150
200
250
300
350
400
012345678
Soldering Time (seconds)
Soldering Iron Bit Temperature (°C)
Wave Soldering Recommendations
0
50
100
150
200
250
300
0
40
80
120
160
200
240
Temperature (°C)
Time (s)
ca 2°C/second
ca 3.5°C/second typical
ca 5°C/second
Cooling
2 +3 seconds maximum
115 °C max
T
preheat
∆T < 150°C
100 °C
Preheating
Typical
First wave
Second wave
260°C
Not recommended for new design. Replacement series P409 275VAC.
8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3025_PMR209 • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR209, Metallized Impregnated Paper, Class X2, 250 VAC
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1. The table indicates the maximum setup temperature for the soldering process.
Dielectric
lm
material
Maximum Preheat Temperature Maximum Peak Soldering
Temperature
Capacitor
Pitch≤10mm
Capacitor
Pitch = 15 mm
Capacitor
Pitch > 15 mm
Capacitor
Pitch≤15mm
Capacitor
Pitch > 15 mm
Polyester 130°C 130°C 130°C 270°C 270°C
Polypropylene 100°C 110°C 130°C 260°C 270°C
Paper 130°C 130°C 140°C 270°C 270°C
Polyphenylene
Sulphide 150°C 150°C 160°C 270°C 270°C
2. The maximum temperature measured inside the capacitor: set the temperature so that inside the element the maximum
temperature is below the limit.
Dielectric Film Material Maximum Temperature
Measured Inside the Element
Polyester 160°C
Polypropylene 110°C
Paper 160°C
Polyphenylene Sulphide 160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectivedipsolderingisavariationofreowsoldering.Inthismethod,theprintedcircuitboardwiththrough-hole
componentstobesolderedispreheatedandtransportedoverthesolderbath,asinnormalowsoldering,without
touching the solder. When the board is over the bath, it is stopped. Pre-designed solder pots are lifted from the bath
with molten solder, only at the places of the selected components, and pressed against the lower surface of the board
to solder the components.
Thetemperatureproleforselectivesolderingissimilartothedoublewaveowsolderingoutlinedinthisdocument.
However, instead of two baths, there is only one with a time from 3 to 10 seconds. In selective soldering, the risk of
overheatingisgreaterthanindoublewaveowsoldering.Greatcaremustbetakensothatthepartsdonotoverheat.
Not recommended for new design. Replacement series P409 275VAC.
9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3025_PMR209 • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR209, Metallized Impregnated Paper, Class X2, 250 VAC
Construction
Detailed Cross Section
Self-Extinguishing
Resin
Self-Extinguishing
Resin
Leads
Metal Contact
Layer
Metal Contact
Layer
Margin
Metallized Impregnated Paper
(First Layer)
Margin
Margin
Metallized Impregnated Paper
(Second Layer)
Resistor (Not Shown)
Integrated into Metallization
Single-sided
Metallized
Polypropylene
Film
FILM WINDING SCHEME OPTIONS
1 Section
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided Metallized Polypropylene Film
2 Sections
3 Sections 4 Sections
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
1 Section
Double-sided Metallized Polyester Film
3 Sections
Double-sided
Metallized
Polyester
Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester
Carrier
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
4 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
1 Section
Polypropylene Film/Foil
2 Sections
Metal Foil Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metallized Polyphenyl-
ene Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
1 Section
Metallized Polyphenylene
Sulfide Film (SMR)
Metallized
Impregnated
Paper
1 Section
Metallized Impregnated Paper
Single-sided
Metallized
Polyester
Film
1 Section
Single-sided Metallized Polyester Film
Polypropylene
Film Dielec-
tric
1 Section
AXIAL - Polypropylene Film/Foil
2 Sections
Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metal Foil
Single-sided
Metallized
Polypropylene
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
1 Section
AXIAL - Single-sided Metallized
Polypropylene Film
Single-sided
Metallized
Polyester
Film
1 Section
AXIAL - Single-sided Metallized
Polyester Film
AXIAL - Double-sided
Metallized Polyester Film
Winding Scheme
L
d
p
R
C
Series Connection
B
H
LL
Not recommended for new design. Replacement series P409 275VAC.
10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3025_PMR209 • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR209, Metallized Impregnated Paper, Class X2, 250 VAC
Marking
BACKFRONT
TOP
Capacitance Resistance,
Safety Class
Voltage
Series
IEC Climatic
Category
Manufacturing
Date Code
Approvals
RC Unit
Self Healing
Packaging Quantities
Size
Code
Lead
Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short
Leads
Bulk
Long
Leads
Standard
Reel
360 mm
Lead and Packaging Code
C/R06
A/R30
L/R19T0
QM
15.2
7.3
13.0
18.5
600
400
400
CE
20.3
7.6
14.0
24.0
1,530
250
250
CP
20.3
11.3
16.5
24.0
1,080
150
180
EJ
25.4
12.1
19.0
30.5
864
100
EL
25.4
15.3
22.0
30.5
648
75
Not recommended for new design. Replacement series P409 275VAC.
11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3025_PMR209 • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR209, Metallized Impregnated Paper, Class X2, 250 VAC
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm Standard IEC
60286–2
Lead Spacing +6/−0.1 FFormed 7.5 10.2 15.2 20.3 22.5 F
Carrier Tape Width ±0.5 W18.0 18.0 18.0 18.0 18.0 18+1/−0.5
Hold-Down Tape Width Minimum W
0
5.0 5.0 5.0 5.0 5.0
Position of Sprocket Hole ±0.5 W
1
9.0 9.0 9.0 9.0 9.0 9+0.75/−0.5
Distance Between Tapes Maximum W
2
3.0 3.0 3.0 3.0 3.0 3.0
Sprocket Hole Diameter ±0.2 D
0
4.0 4.0 4.0 4.0 4.0 4.0
Feed Hole Lead Spacing ±0.3 P
0
(1) 12.7(4) 12.7 12.7 12.7 12.7 12.7
Distance Lead – Feed Hole ±0.7 P
1
3.75 7.6 5.1 8.9 5.3 P1
Deviation Tape – Plane Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3
Lateral Deviation Maximum ∆h 2.0 2.0 2.0 2.0 2.0 2.0
Total Thickness ±0.2 t0.7 0.7 0.7 0.7 0.9 Maximum 0.9 Maximum
Sprocket Hole/Cap Body Nominal H
0
(2) 18+2/−0 18+2/−0 18+2/−0 18+2/−0 18.5 ±0.5 18+2/−0
Sprocket Hole/Top of Cap Body Maximum H
1
(3) 43 43 43 58 58 58 Maximum
(1) Maximum cumulative feed hole error, 1 mm per 20 parts
(2) 16.5 mm available on request
(3) Depending on case size
(4) 15 mm available on request
Lead Spacing 10.2 – 15.2 mm
Lead Spacing 20.3 – 22.5 mm
Formed Leads from 10.2 – 7.5 mm
H1
H0
H0
P0P1D0
W2W0W1
H1
P0
W2
W0
D0
W
t
W1
H1
H0
P0D0
W2
W1
W0
D0
P1
∆p∆p∆p
∆p∆p
∆p
∆h∆h
W
∆h∆h
t
∆h∆h
FF
F = 7.5
W
W
P1
Not recommended for new design. Replacement series P409 275VAC.
12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3025_PMR209 • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR209, Metallized Impregnated Paper, Class X2, 250 VAC
H
T
W
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Series Dimensions (mm)
H W T
R4x,R4x+R,R7x,RSB
360 340 59
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
330
330
50
Reel Speci cations
Series Dimensions (mm)
D H W
R4x,R4x+R,R7x,RSB 355
500
30
25 55 (Max)
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
360
500
30 46 (Max)
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year
Code
Month
Code
2010
A
January
1
2011
B
February
2
2012
C
March
3
2013
D
April
4
2014
E
May
5
2015
F
June
6
2016
H
July
7
2017
J
August
8
2018
K
September
9
2019
L
October
O
2020
M
November
N
2021
N
December
D
2022
P
2023
R
2024
S
2025
T
2026
U
2027
V
2028
W
2029
X
2030
A
D
W
H
Not recommended for new design. Replacement series P409 275VAC.
13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3025_PMR209 • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR209, Metallized Impregnated Paper, Class X2, 250 VAC
KEMET Electronics Corporation Sales Offi ces
Foracompletelistofourglobalsalesoffices,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
Not recommended for new design. Replacement series P409 275VAC.