TCM Series Conductive Polymer Solid Electrolytic Chip Multianode Capacitors FEATURES * Conductive polymer electrode, multianode design * Benign failure mode under recommended use conditions * Extremely Low ESR * 3x reflow 260C compatible * Volumetric efficiency * High frequency capacitance retention LEAD-FREE COMPATIBLE COMPONENT SnPb termination option is not RoHS compliant. Elektra Award 2010 APPLICATIONS * Telecommunication routers * Basestations with high power DC/DCs CASE DIMENSIONS: millimeters (inches) MARKING E, V CASE Code AVX LOGO Polymer Polarity Band (Anode+) Capacitance Value in pF 337 = 330F V 337 A XXXXX Case Size See table above EIA Metric 7343-43 7361-38 Rated Voltage A = 10V L0.20 W+0.20 (0.008) (0.008) -0.10 (0.004) 7.30 (0.287) 4.30 (0.169) 7.30 (0.287) 6.10 (0.240) H+0.20 (0.008) -0.10 (0.004) 4.10 (0.162) 3.55 (0.140) W10.20 (0.008) 2.40 (0.094) 3.10 (0.120) A+0.30 (0.012) S Min. -0.20 (0.008) 1.30 (0.051) 4.40 (0.173) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. ID Code HOW TO ORDER TCM E Type E EIA Code 2917 2924 108 M 004 Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M=20% Rated DC Voltage 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc 100 = 100Vdc R Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel H = Tin Lead 7" Reel K = Tin Lead 13" Reel 0010 E ESR in m Additional Character E = Black resin TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Temperature Range: Reliability: Termination Finish: All technical data relate to an ambient temperature of +25C 10F to1000F 20% 0.1CV -55C to +125C 1% per 1000 hours at 85C, VR with 0.1/V series impedance, 60% confidence level Sn Plating (standard) and SnPb Plating NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the AVX Conductive Polymer Capacitor Guidelines for more information or contact factory for application assistance. 210 092419 TCM Series Conductive Polymer Solid Electrolytic Chip Multianode Capacitors CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance F Code 10 106 22 226 33 336 47 476 68 686 100 107 150 157 220 227 330 337 470 477 680 687 1000 108 2.5V (e) 4V (G) Rated Voltage DC (VR) to 85C 10V (A) 16V (C) 20V (D) 6.3V (J) 25V (E) E(60) E(60) 35V (V) 100V (A) V(50) E(25) E(60) E(25) E(25) E(6,10) E(12) E(6,8,10,12) E(10,15) E(7,10) E(12) E(10,15) E(40) E(25) Released ratings, (ESR ratings in mOhms in parentheses) Engineering samples - please contact AVX Note: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE AVX Part No. Case Capacitance Size (F) Rated Voltage (V) TCME108M002#0006E TCME108M002#0010E E E 1000 1000 2.5 2.5 TCME687M004#0012E TCME108M004#0006E TCME108M004#0008E TCME108M004#0010E TCME108M004#0012E E E E E E 680 1000 1000 1000 1000 4 4 4 4 4 TCME337M006#0010E TCME337M006#0015E TCME477M006#0007E TCME477M006#0010E TCME687M006#0012E E E E E E 330 330 470 470 680 6.3 6.3 6.3 6.3 6.3 TCME337M010#0010E TCME337M010#0015E E E 330 330 10 10 TCME107M016#0025E TCME227M016#0040E TCME337M016#0025E E E E 100 220 330 16 16 16 TCME686M020#0025E E 68 20 TCME336M025#0060E TCME476M025#0060E E E 33 47 25 25 TCME226M035#0025E TCME336M035#0060E E E 22 33 35 35 TCMV106M100#0050E V 10 100 Maximum Operating Temperature (C) DCL Max. (A) 2.5 Volt @ 105C 125 250 125 250 4 Volt @ 105C 125 272 125 400 125 400 125 400 125 400 6.3 Volt @ 105C 125 198 125 198 125 296 125 296 125 408 10 Volt @ 105C 125 330 125 330 16 Volt @ 105C 125 160 125 352 125 528 20 Volt @ 105C 125 136 25 Volt @ 105C 125 82.5 125 117.5 35 Volt @ 105C 125 77 125 115.5 100 Volt @ 105C 125 100 DF Max. (%) ESR Max. @ 100kHz (m) 45C 85C 125C 10 10 6 10 8300 6400 5800 4500 2100 1600 3 3 8 8 8 8 8 12 6 8 10 12 5800 8300 7200 6400 5800 4100 5800 5000 4500 4100 1500 2100 1800 1600 1500 3 3 3 3 3 8 8 10 10 8 10 15 7 10 12 6400 5200 7700 6400 5800 4500 3600 5400 4500 4100 1600 1300 1900 1600 1500 3 3 3 3 3 8 8 10 15 6400 5200 4500 3600 1600 1300 3 3 8 8 8 25 40 25 4000 3200 4000 2800 2200 2800 1000 800 1000 3 3 3 8 25 4000 2800 1000 3 8 8 60 60 2600 2600 1800 1800 700 700 3 3 8 8 25 60 4000 2600 2800 1800 1000 700 3 3 8 50 2900 2000 700 3 100kHz RMS Current (mA) MSL Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 274. NOTE: AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards. 092419 211 TCM Series Conductive Polymer Solid Electrolytic Chip Multianode Capacitors RECOMMENDED DERATING FACTOR For Vr 10V Voltage and temperature derating as percentage of Vr. 100% 95% For Vr 16V 100% Rated Voltage 95% 90% 85% Rated voltage 10V 16V Operating Temperature 85C 105C 125C 90% 90% 60% 80% 80% 54% 80% Rated Voltage 90% Recommended Application Voltage 85% 80% 75% 75% 70% 70% 67% 65% 60% 60% 60% 55% 50% 50% 85C 105C 125C 67% 65% 55% -55% Recommended Application Voltage -55% 54% 85C 105C 125C QUALIFICATION TABLE TEST Endurance Storage Life Humidity Temperature Stability Surge Voltage *Initial Limit 212 TCM series (Temperature range -55C to +125C) Characteristics Visual examination no visible damage Apply rated voltage (Ur) at 105C and category voltDCL 1.25 x initial limit age (Uc) at 125C for 2000 hours through a circuit C/C within 20% of initial value impedance of 0.1/V. Stabilize at room temperature DF 1.5 x initial limit for 1-2 hours before measuring. ESR 2 x initial limit Visual examination no visible damage DCL 2 x initial limit Store at 125C, no voltage applied, for 2000 hours. Stabilize at room temperature for 1-2 hours before C/C within 20% of initial value measuring. DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage Store at 65C and 95% relative humidity for 500 DCL 3 x initial limit hours, with no applied voltage. Stabilize at room C/C within +30/-20% of initial value temperature and humidity for 1-2 hours before DF 1.5 x initial limit measuring. ESR 2 x initial limit Condition Step 1 2 3 4 5 6 TemperatureC +20 -55 +20 +85 +125 +20 Duration(min) 15 15 15 15 15 15 Apply 1.3x category voltage (Uc) at 125C for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000 DCL C/C DF +20C -55C IL* n/a n/a +0/-20% IL* 1.5 x IL* +20C +85C +125C +20C IL* 10 x IL* 12.5 x IL* IL* 10% +20/-0% +30/-0% 10% IL* 1.5 x IL* 2 x IL* IL* Visual examination no visible damage DCL initial limit C/C within +20/-30% of initial value DF 1.25 x initial limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85C for 24 hours. 092419 TCM Series Conductive Polymer Solid Electrolytic Chip Multianode Capacitors AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP: CONDUCTIVE POLYMER F39 high humidity undertab 092419 213