TCME336M025R0060E - AVX - Datasheet.Live

210 092419

TCM

Type

Case Size

See table

above

108

Capacitance Code

pF code: 1st two digits

represent significant figures,

3rd digit represents multiplier

(number of zeros to follow)

Tolerance

M=±20%

004

Rated DC Voltage

002 = 2.5Vdc

004 = 4Vdc

006 = 6.3Vdc

010 = 10Vdc

016 = 16Vdc

020 = 20Vdc

025 = 25Vdc

035 = 35Vdc

100 = 100Vdc

HOW TO ORDER

Packaging

R = Pure Tin 7" Reel

S = Pure Tin 13" Reel

H = Tin Lead 7" Reel

K = Tin Lead 13" Reel

Technical Data: All technical data relate to an ambient temperature of +25ºC

Capacitance Range: 10μF to1000μF

Capacitance Tolerance: ±20%

Leakage Current DCL: 0.1CV

Temperature Range: -55ºC to +125ºC

Reliability:

1% per 1000 hours at 85°C, VRwith 0.1Ω/V series impedance, 60% confidence level

Termination Finish: Sn Plating (standard) and SnPb Plating

TECHNICAL SPECIFICATIONS

TCM Series

Conductive Polymer Solid Electrolytic Chip Multianode Capacitors

CASE DIMENSIONS: millimeters (inches)

Code EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012) S Min.

Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)

E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)

V 2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.120) 1.30 (0.051) 4.40 (0.173)

W1dimension applies to the termination width for A dimensional area only.

0010

ESR in mΩ

Elektra Award 2010

XXXXX

337 A

AVX LOGO

Polymer Capacitance Value in pF

337 = 330µF

Rated Voltage

A = 10V

ID Code

Polarity

Band

(Anode+)

MARKING

E, V CASE

FEATURES

• Conductive polymer electrode,

multianode design

• Benign failure mode under

recommended use conditions

• Extremely Low ESR

• 3x reflow 260°C compatible

• Volumetric efficiency

• High frequency capacitance retention

APPLICATIONS

• Telecommunication routers

• Basestations with high power DC/DCs

NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously

at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These

changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their

general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temper-

ature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the AVX Conductive Polymer

Capacitor Guidelines for more information or contact factory for application assistance.

LEAD-FREE COMPATIBLE

COMPONENT

SnPb termination option is not

RoHS compliant.

Additional

Character

E = Black resin

092419 211

TCM Series

Conductive Polymer Solid Electrolytic Chip Multianode Capacitors

Capacitance Rated Voltage DC (VR) to 85°C

μF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 100V (A)

10 106 V(50)

22 226 E(25)

33 336 E(60) E(60)

47 476 E(60)

68 686 E(25)

100 107 E(25)

150 157

220 227 E(40)

330 337 E(10,15) E(10,15) E(25)

470 477 E(7,10)

680 687 E(12) E(12)

1000 108 E(6,10) E(6,8,10,12)

CAPACITANCE AND RATED VOLTAGE RANGE

(LETTER DENOTES CASE SIZE)

Released ratings, (ESR ratings in mOhms in parentheses)

Engineering samples - please contact AVX

Note: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards.

RATINGS & PART NUMBER REFERENCE

Moisture Sensitivity Level (MSL) is defined according to J-STD-020.

All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at

rated voltage after 5 minutes.

ESR allowed to move up to 1.25 times catalog limit post mounting.

For typical weight and composition see page 274.

NOTE: AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards.

Rated Maximum DCL DF ESR

AVX Case Capacitance Voltage Operating Max. Max. Max. 100kHz RMS Current (mA)

MSL

Part No. Size (μF) (V) Temperature (μA) (%) @ 100kHz 45ºC 85ºC 125ºC

(ºC) (mΩ)

2.5 Volt @ 105°C

TCME108M002#0006E E 1000 2.5 125 250 10 6 8300 5800 2100 3

TCME108M002#0010E E 1000 2.5 125 250 10 10 6400 4500 1600 3

4 Volt @ 105°C

TCME687M004#0012E E 680 4 125 272 8 12 5800 4100 1500 3

TCME108M004#0006E E 1000 4 125 400 8 6 8300 5800 2100 3

TCME108M004#0008E E 1000 4 125 400 8 8 7200 5000 1800 3

TCME108M004#0010E E 1000 4 125 400 8 10 6400 4500 1600 3

TCME108M004#0012E E 1000 4 125 400 8 12 5800 4100 1500 3

6.3 Volt @ 105°C

TCME337M006#0010E E 330 6.3 125 198 8 10 6400 4500 1600 3

TCME337M006#0015E E 330 6.3 125 198 8 15 5200 3600 1300 3

TCME477M006#0007E E 470 6.3 125 296 10 7 7700 5400 1900 3

TCME477M006#0010E E 470 6.3 125 296 10 10 6400 4500 1600 3

TCME687M006#0012E E 680 6.3 125 408 8 12 5800 4100 1500 3

10 Volt @ 105°C

TCME337M010#0010E E 330 10 125 330 8 10 6400 4500 1600 3

TCME337M010#0015E E 330 10 125 330 8 15 5200 3600 1300 3

16 Volt @ 105°C

TCME107M016#0025E E 100 16 125 160 8 25 4000 2800 1000 3

TCME227M016#0040E E 220 16 125 352 8 40 3200 2200 800 3

TCME337M016#0025E E 330 16 125 528 8 25 4000 2800 1000 3

20 Volt @ 105°C

TCME686M020#0025E E 68 20 125 136 8 25 4000 2800 1000 3

25 Volt @ 105°C

TCME336M025#0060E E 33 25 125 82.5 8 60 2600 1800 700 3

TCME476M025#0060E E 47 25 125 117.5 8 60 2600 1800 700 3

35 Volt @ 105°C

TCME226M035#0025E E 22 35 125 77 8 25 4000 2800 1000 3

TCME336M035#0060E E 33 35 125 115.5 8 60 2600 1800 700 3

100 Volt @ 105°C

TCMV106M100#0050E V 10 100 125 100 8 50 2900 2000 700 3

212 092419

TCM Series

Conductive Polymer Solid Electrolytic Chip Multianode Capacitors

QUALIFICATION TABLE

TCM series (Temperature range -55°C to +125°C)

TEST Condition Characteristics

Visual examination no visible damage

DCL 1.25 x initial limit

ΔC/C within ±20% of initial value

DF 1.5 x initial limit

ESR 2 x initial limit

Visual examination no visible damage

DCL 2 x initial limit

ΔC/C within ±20% of initial value

DF 1.5 x initial limit

ESR 2 x initial limit

Visual examination no visible damage

DCL 3 x initial limit

ΔC/C within +30/-20% of initial value

DF 1.5 x initial limit

ESR 2 x initial limit

+20ºC -55ºC +20ºC +85ºC +125ºC +20ºC

DCL

IL* n/a IL* 10 x IL* 12.5 x IL* IL*

ΔC/C

n/a +0/-20% ±10% +20/-0% +30/-0% ±10%

IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL*

Visual examination no visible damage

DCL initial limit

ΔC/C within +20/-30% of initial value

DF 1.25 x initial limit

Apply rated voltage (Ur) at 105°C and category volt-

age (Uc) at 125°C for 2000 hours through a circuit

impedance of ≤0.1Ω/V. Stabilize at room temperature

for 1-2 hours before measuring.

Store at 125ºC, no voltage applied, for 2000 hours.

Stabilize at room temperature for 1-2 hours before

measuring.

Store at 65ºC and 95% relative humidity for 500

hours, with no applied voltage. Stabilize at room

temperature and humidity for 1-2 hours before

measuring.

Apply 1.3x category voltage (Uc) at 125ºC for

1000 cycles of duration 6 min (30 sec charge,

5 min 30 sec discharge) through a charge /

discharge resistance of 1000Ω

Step Temperature°C Duration(min)

1 +20 15

2 -55 15

3 +20 15

4 +85 15

5 +125 15

6 +20 15

*Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours.

Endurance

Storage Life

Humidity

Temperature

Stability

Surge

Voltage

RECOMMENDED DERATING FACTOR

Voltage and temperature

derating as percentage of Vr.

For Vr ≤ 10V For Vr ≥ 16V

Recommended

Application Voltage

100%

95%

90%

85%

80%

75%

70%

65%

60%

55%

50%

-55% 85ºC 105ºC 125ºC

67%

60%

Recommended

Application Voltage

Rated VoltageRated Voltage

100%

95%

90%

85%

80%

75%

70%

65%

60%

55%

50%

-55% 85ºC 105ºC 125ºC

67%

54%

Rated Operating Temperature

voltage ≤85°C 105°C 125°C

≤10V 90% 90% 60%

≥16V 80% 80% 54%

F39

high humidity

undertab

092419 213

TCM Series

Conductive Polymer Solid Electrolytic Chip Multianode Capacitors

AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP

SERIES LINE UP: CONDUCTIVE POLYMER