Switches and Indicators Swisstac Switches and Indicators Index Series Swisstac Description Page 583 Product Assembly Page 584 Mounting Instruction Page 585 Product Range - pushbuttons for standard mounting - pushbuttons for flush mounting - accessories / spare parts 582 01.2000 Page 591 Page 608 Page 622 Technical Data Page 638 Drawing / Dimension / Layouts Page 642 Circuit Drawing Page 657 Marking Page 667 Swisstac Description SWISSTAC - Three crucial advantages! Marking Easy storage in minimum space Every SWISSTAC switch can be altered very simply any number of times, and afterwards added to, modified or adapted. This highly modular concept means that only a few subassemblies reducing storage costs. Engraved, printed film inlay see under `Marking" page 667. All connections on one plane All the terminals are arranged at the same level, are clearly laid out and fully accessible even when in close-packed arrays. Three colours provide optical help to make connections easier. Illumination Perfect illumination of the lenses supplied in various colours is guaranteed by the incandescent lamps midget grooved T 1 3/4 and T 5.5 (660V9). Where supply voltages are over 60 V, a voltage-reduction element (ext. protective series resistor or capacitor) must be used. Because of high surface temperature, the protective series resistor may not be soldered direct onto the connections of the pushbuttons. Multi-LED midget grooved T 1 3/4 and T 5.5 (6, 12, 24, 48 V) are available in the colours red, yellow and green. Ideal for switch interlock systems SWISSTAC switches can be mechanically combined in many ways to form switch interlock systems and in fact in rows of up 20 switches. This means that complicated protection and relay interlocks are unnecessary. Individual and irregular spacings between the switches of an array are no problem either. Switch position indicator When the pushbutton with latch function is operated, the lens latches in mechanically. The position of the lens makes the switch position evident at all the times. CE Keylock switches Our products are marked with the internationally approved CE lowvoltage safety standard. Standard lock 1 Standard number is B2 300. We supply B2 300 without specifications of the lock numbers. Four further standard locks are B2 301 - B2 304. This additional designation should be quoted when ordering. A further 95 locks are available in or without passepartout version on request. 2 keys are supplied per keylock switch. Spare keys for a standard lock can be ordered under Type no. 2402001-00 ( plaese quote lock number). Example: 240-200-00 B2 300. General information Swisstac, a modularly constructed control switch system, offers the user a wide range of products: buzzers, illuminated pushbuttons and pushbuttons, indicators, emergency stop switches, push-pull illuminated switches, keylock switches and selector switches, as well as switch interlock systems in the front-facing protection classes IP 40 and IP 65. The front dimensions of the switch units are: 18 mm dia., 18 x 18 mm, 24 mm dia., 24 x 24 mm. For flush mounting, dimensions 25 mm dia., 24 x 24 mm, 24 x 30 mm are also available. Emergency stop switch with key to unlock Standard lock is B2 390. Four further standard locks are B2 391 B2-394. When ordering this additional designation should be quoted. Spare keys for standard lock can be ordered under Type no. 240-300100 (please quote lock). Example: 240-3001-00 B2 390. Two keys are supplied per emergency stop switch. Construction SWISSTAC switches are of modular construction and are divided into the following three groups: - Front section: Man/switch interface and status indicator two-part lens for engraving, film insert or printing - Intermediate section: Latching/ pulse facility, lamp holder, latch function - Intermediate section with switching mechanism and lamp holder, which is available in two versions: T: 5.5 max., 1.2 W and midget grooved T 1 3/4 max. Emergency Stop Switch, foolproof with key to unlock Kaba safety switch. Standard lock number is 1001. Spare keys can be ordered under Type no. 240.4001-00 1001. 2 keys are supplied per emergency stop switches. 1.2 W. - Terminal block: up to a max. of five switching elements can be joined together in one switch terminal block. Are supplied mounted serially on intermediate sections. Can be disassembled easily for wiring. All measurements in mm Technical specifications subject to modification. 583 01.2002 Swisstac product assembly illuminated-/pushbutton 1 2 3 4 5 6 7 8 lens front bezel fixing nut spring with pin for changing from maintained to momentary intermediate section holder for switching element switching element block switching element 0 pushbutton-/illuminated pushbutton for flush mounting 1 2 3 4 5 6 7 8 9 10 0 584 01.2002 lens front bezel front bezel set f. fl. mounting front panel fixing nut spring with pin f. changing from main to mom intermediate section holder f. switching element switching element block switching element Mounting Instruction Swisstac illuminated-/pushbutton 35mm The switch is mounted in a fascia or control panel in three steps: 1. Detach terminal block as in drawing, remove fixing nut 2. Insert switch from the front in fascia/control panel 3. Reassemble the switch in the reverse order To detach terminal block Note: Type-identification on legs of actuator illuminated-/pushbutton 55 - 70 mm The switch is mounted in a fascia/control panel in two steps: 1. Insert switch from back side in fascia/control panel 2. Snap on bezel and tighten fixing nut Lens Bezel Illuminated pushbutton illuminated-/pushbutton 55 - 70 mm sealing gland and -ring The first time the button is pressed, the gland is forced into its groove and becomes effective. 585 01.2002 Swisstac Mounting Instruction indicator 30 - 70 mm The indicator is mounted in a fascia/control panel in two steps: 1. Insert indicator from back side in fascia/control panel 2. Snap on bezel and tighten fixing nut 2 Lens Bezel Indicator indicator 30 - 70 mm sealing gland, -ring and press ring The press ring is fitted between gland and lens. The seal is effective when the lens is snapped into place. emergency stop switch turn to release 55 - 70 mm The switch is mounted in a fascia or control panel in three steps: 1. Detach front section just in released position, as in drawing 2. Insert switch from back side in fascia/control panel 3. Snap on front section and tighten fixing nut Important for IP 65 With models to IP 65, the sealing ring 1) is already fitted This must be removed if the SWISSTAC emergency Stop identity plate (IP 65 model) is used. Zero position Identity plate 586 01.2002 Wiring diagram Sealing ring2) is fitted as standard in models to IP 65. Swisstac Mounting Instruction emergency stop switch with key release 55 - 70 mm The switch is mounted in a fascia or control panel in three steps: 1. Detach front section, just in released position, as in drawing, remove fixing nut 2. Insert switch from back side in fascia/control panel 3. Snap on front section and tighten fixing nut Important for IP 65 With models to IP 65, the sealing ring1)is already fitted This must be removed if the SWISSTAC emergency Stop identity plate (IP 65 model) is used. Zero position Identity plate Sealing ring2) is fitted as standard in models to IP 65. Wiring diagram emergency stop switch foolproof Hint for mounting: the torque with which the fixing nut is tightened must not exceed 50 Ncm. Hint for dismounting: dismantling of switching element just with dismantling tool. keylock switch 45mm The switch is mounted in a fascia or control panel in three steps: 1. Detach terminal block as in drawing, remove fixing nut 2. Insert switch from front side in fascia/control panel 3. Reassemble the switch in the reverse order To detach terminal block 587 01.2002 Mounting Instruction Swisstac keylock switch 55 mm The switch is mounted in a fascia/control panel in three steps: 1. Remove front section as in drawing 2. Insert switch from back side in fascia/control panel 3. Snap on front section (see Note) and tighten fixing nut Zero position Wiring diagram To assemble, the key must be at the zero position, the symbol 0 is at the top, and on the terminal block the circuit diagram is uppermost. keylock switch 70 mm The switch is mounted in a fascia/control panel in three steps: 1. Remove front section as in drawing 2. Insert switch from back side in fascia/control panel 3. Snap on front section (see Note) and tighten fixing nut. Zero position Wiring diagram To assemble, the key must be at the zero position, the symbol 0 is at the top, and on the terminal block the circuit diagram is uppermost. selector switch 45 mm The switch is mounted in a fascia or control panel in three steps: 1. Detach terminal block as in drawing, remove fixing nut 2. Insert switch from front side in fascia/control panel 3. Reassemble the switch in the reverse order To detach terminal block 588 01.2002 Mounting Instruction Swisstac selector switch 55 mm The switch is mounted in a fascia/control panel in three steps: 1. Remove front section as in drawing 2. Insert switch from back side in fascia/control panel 3. Snap on front section (see Note) and tighten fixing nut Zero position Wiring diagram To assemble, the lever must be at the zero position, the symbol 0 is as the top, and on the terminal block the circuit diagram is uppermost. selector switch 70 mm The switch is mounted in a fascia/control panel in three steps: 1. Remove front section as in drawing 2. Insert switch from back side in fascia/control panel 3. Snap on front section (see Note) and tighten fixing nut Zero position Wiring diagram To assemble, the lever must be at the zero position, the symbol 0 is at the top, and on the terminal block the circuit diagram is uppermost. push pull illuminated switch The switch is mounted in a fascia or control panel in three steps: 1. Detach terminal block as in drawing, remove fixing nut 2. Insert switch from back side in fascia/control panel 3. Reassemble the switch in the reverse order Push-Pull knob To detach terminal block Push-pull knob can be mounted in only one position. Zero position Wiring diagram 589 01.2002 Swisstac Mounting Instruction buzzer 30 - 55 mm The alarmbuzzer is mounted in a fascia/control panel in two steps: 1. Insert alarmbuzzer from backside in fascia/control panel 2. snap on bezel and tighten fixing nut buzzerelement bezel 590 01.2002 buzzerhousing Swisstac Pushbuttons for standard mounting indicator actuator 35 mm 18 x 18 mm Typ-Nr. 690-4000-00 690-4000-W0 18 mm dia. Typ-Nr. 690-2000-00 690-2000-W0 component layout b mounting dimensions indicator actuator 35 mm lampholder MG T 1 3/4 degree of protection IP 40 IP 65 18 x 24 mm Typ-Nr. 690-6000-00 690-6000-W0 technical drawing a circuit drawing d lens for 35 mm page 622 d lamp element block for 35 mm page 632 d filament lamp MG T 1 3/4 page 634 d LED MG T 1 3/4 page 634 e 1 1 1 1 1 2 1 1 0,004 0,005 circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 indicator 30 - 70 mm protection degree IP 40/IP 65 is determined by front bezel and lens part no. 990-.000-K0 890-.000-K0 990-.000-0P 990-.000-00 890-.000-0P 890-.000-00 1 1 1 1 1 1 2 3 4 5 6 7 3 3 3 3 3 3 component layout lamp socket MG T 1 3/4 T 5.5 MG T 1 3/4 MG T 1 3/4 T 5.5 T 5.5 mounting dimensions P P - technical drawing mounting depth 30 mm 45 mm 52 mm 55 mm 67 mm 70 mm circuit drawing indicator 30 - 70 mm connection method d lens page 623 d front bezel for illuminated-/pushbutton 55 - 70 mm and indicator 30 - 70 mm page 627 d pressure ring page 630 d filament lamp MG T 1 3/4 page 634 d LED MG T 1 3/4 page 634 d filament lamp T 5.5 page 634 d LED T 5.5 page 635 1 1 e 0,004 0,006 0,007 0,007 0,010 0,010 connection method : soldering-/plug-in terminal = -, PCB terminal = P The indicators 55 mm and 70 mm are as long as the corresponding illuminated pushbuttons and fit to the PCB plug-in base and multi-plug housing. circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 591 01.2002 Swisstac Pushbuttons for standard mounting pushbutton-/illuminated pushbutton actuator 35 mm 18 x 18 mm Typ-Nr. 680-4000-00 600-4000-00 680-4000-W0 600-4000-W0 18 mm dia. Typ-Nr. 680-2000-00 600-2000-00 680-2000-W0 600-2000-W0 component layout b mounting dimensions 18 x 24 mm Typ-Nr. 680-6000-00 600-6000-00 680-6000-W0 600-6000-W0 technical drawing IP 65 M MA M MA a circuit drawing pushbutton-/illuminated pushbutton actuator 35 mm lampholder MG T 1 3/4 degree of protection IP 40 switching action d lens for 35 mm page 622 d filament lamp MG T 1 3/4 page 634 d LED MG T 1 3/4 page 634 d snap-action switching element block for 35 mm page 631 e 2 3 2 3 1 1 1 1 1 1 2 2 1 1 1 1 0,004 0,004 0,005 0,005 switching action : momentary action = M, maintained action = MA (changeable to momentary action, reversible) circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 592 01.2002 Swisstac Pushbuttons for standard mounting illuminated-/pushbutton 55 - 70 mm protection degree IP 40/IP 65 is determined by front bezel and lens MA P 3 NC + 3 NO MA P 4 NC + 4 NO MA P 5 NC + 5 NO MA P 1 NC + 1 NO MA - 2 NC + 2 NO MA - 3 NC + 3 NO MA - 4 NC + 4 NO MA - 5 NC + 5 NO MA - 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO MA MA MA MA MA MA MA MA MA MA P P P P P - component layout 2 NC + 2 NO contacts P mounting dimensions 70 mm MA technical drawing 67 mm 1 NC + 1 NO lamp socket MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 T 5.5 T 5.5 T 5.5 T 5.5 T 5.5 T 5.5 T 5.5 T 5.5 T 5.5 T 5.5 circuit drawing 55 mm connection method illuminated-/pushbutton 55 - 70 mm mounting depth 52 mm switching action d lens page 623 d front bezel for illuminated-/pushbutton 55 - 70 mm and indicator 30 - 70 mm page 627 d fialement lamp MG T 1 3/4 page 634 d filament lamp T 5.5 page 634 d LED T 5.5 page 635 e 4 8 3 1 0,013 902-.000-0P 5 8 3 1 0,014 903-.000-0P 6 8 3 1 0,014 904-.000-0P 7 8 3 1 0,018 905-.000-0P 8 8 3 1 0,021 901-.000-00 4 9 3 0,013 902-.000-00 5 9 3 0,014 903-.000-00 6 9 3 0,015 904-.000-00 7 9 3 0,019 905-.000-00 8 9 3 0,022 801-.000-0P 802-.000-0P 803-.000-0P 804-.000-0P 805-.000-0P 801-.000-00 802-.000-00 803-.000-00 804-.000-00 805-.000-00 4 5 6 7 8 4 5 6 7 8 10 10 10 10 10 11 11 11 11 11 3 3 3 3 3 3 3 3 3 3 part no. 901-.000-0P 1 1 1 1 1 0,015 0,016 0,017 0,020 0,023 0,015 0,016 0,017 0,021 0,024 contacts : normally closed = NC, normally open = NO switching action : maintained action = MA (changeable to momentary action, reversible) connection method : PCB terminal = P, soldering-/plug-in terminal = circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 593 01.2002 Swisstac Pushbuttons for standard mounting emergency stop switch 55 - 70 mm 67 mm 70 mm IP 65 52 mm 55 mm 67 mm 70 mm Continued on next page 594 01.2002 9 10 11 9 10 11 9 10 11 9 10 11 9 10 11 9 10 11 9 10 11 9 10 11 12 12 12 13 13 13 14 14 14 15 15 15 12 12 12 13 13 13 14 14 14 15 15 15 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 component layout P P P P P P P P P P P P - mounting dimensions 55 mm 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 24 mm dia. Typ-Nr. 951+2000-0P 952+2000-0P 953+2000-0P 951+2000-00 952+2000-00 953+2000-00 851+2000-0P 852+2000-0P 853+2000-0P 851+2000-00 852+2000-00 853+2000-00 951+2000-WP 952+2000-WP 953+2000-WP 951+2000-W0 952+2000-W0 953+2000-W0 851+2000-WP 852+2000-WP 853+2000-WP 851+2000-W0 852+2000-W0 853+2000-W0 technical drawing mounting depth 52 mm circuit drawing degree of protection IP 40 connection method emergency stop switch 55 - 70 mm according to VDE max. 2 NC are permitted unlocking twist to release contacts d label for emergency stop switch page 636 1 1 1 1 1 1 1 1 1 1 1 1 e 0,018 0,019 0,020 0,018 0,019 0,020 0,021 0,022 0,023 0,021 0,022 0,023 0,018 0,019 0,020 0,018 0,019 0,020 0,021 0,022 0,023 0,021 0,022 0,023 67 mm 70 mm IP 65 52 mm 55 mm 67 mm 70 mm 9 10 11 9 10 11 9 10 11 9 10 11 9 10 11 9 10 11 9 10 11 9 10 11 12 12 12 13 13 13 14 14 14 15 15 15 12 12 12 13 13 13 14 14 14 15 15 15 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 component layout P P P P P P P P P P P P - mounting dimensions 55 mm 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 1 NC 2 NC 3 NC 24 mm dia. Typ-Nr. 961+2401-0P 962+2401-0P 963+2401-0P 961+2401-00 962+2401-00 963+2401-00 861+2401-0P 862+2401-0P 863+2401-0P 861+2401-00 862+2401-00 863+2401-00 961+2401-WP 962+2401-WP 963+2401-WP 961+2401-W0 962+2401-W0 963+2401-W0 861+2401-WP 862+2401-WP 863+2401-WP 861+2401-W0 862+2401-W0 863+2401-W0 technical drawing mounting depth 52 mm connection method degree of protection IP 40 contacts emergency stop switch 55 70 mm standard lock B2 390, other lock numbers on request according to VDE max. 2 NC are permitted unlocking key to release circuit drawing Swisstac Pushbuttons for standard mounting 1 1 1 1 1 1 1 1 1 1 1 1 e 0,030 0,031 0,032 0,030 0,031 0,032 0,033 0,034 0,035 0,033 0,034 0,035 0,030 0,031 0,032 0,030 0,031 0,032 0,033 0,034 0,035 0,033 0,034 0,035 contacts : 1 normally closed = 1 NC, normally closed = NC connection method : PCB terminal = P, soldering-/plug-in terminal = hint: - we recommend to use location strip no. 260-0020-00 for anti-twisting of the front bezel. - at momentary position the overturning force is max. 60 Ncm. circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 595 01.2002 Swisstac Pushbuttons for standard mounting emergency stop switch foolproof 41 mm according to EN 418 IP 65 41 mm 1 NC 1 NC + 1 NO 2 NC 1 NC 1 NC + 1 NO 2 NC - contacts : 1 normally closed = 1 NC, normally closed = NC, normally open = NO connection method : soldering-/plug-in terminal = Mounting hint: starting torque for fixing nut max. 50 Ncm circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652 596 01.2002 27 mm dia. Typ-Nr. 551-8000-W0 553-8000-W0 552-8000-W0 561-8101-W0 563-8101-W0 562-8101-W0 mounting dimensions key to release connection method mounting depth 41 mm technical drawing standard lock 1001 degree of protection IP 65 circuit drawing emergency stop switch foolproof 41 mm unlocking twist to release contacts d label for emergency stop switch page 636 e 12 13 14 12 13 14 16 16 16 16 16 16 6 6 6 6 6 6 0,025 0,025 0,025 0,047 0,047 0,047 Swisstac Pushbuttons for standard mounting pushbutton with mushroom-head cap 55 - 70 mm 70 mm part no. 901-.000-0P 902-.000-0P 903-.000-0P 904-.000-0P 905-.000-0P 901-.000-00 902-.000-00 903-.000-00 904-.000-00 905-.000-00 801-.000-0P 802-.000-0P 803-.000-0P 804-.000-0P 805-.000-0P 801-.000-00 802-.000-00 803-.000-00 804-.000-00 805-.000-00 15 16 17 18 19 15 16 17 18 19 15 16 17 18 19 15 16 17 18 19 17 17 17 17 17 18 18 18 18 18 19 19 19 19 19 20 20 20 20 20 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 component layout connection method P P P P P P P P P P - mounting dimensions 67 mm maintained maintained maintained maintained maintained maintained maintained maintained maintained maintained maintained maintained maintained maintained maintained maintained maintained maintained maintained maintained technical drawing 55 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO switching action mounting depth 52 mm circuit drawing pushbutton with mushroom-head cap 55 - 70 mm degree of protection IP 40 contacts d mushroom-head cap page 625 d front bezel for mushroon-head pushbutton 55 - 70 mm page 628 1 1 1 1 1 1 1 1 1 1 e 0,013 0,014 0,014 0,018 0,021 0,013 0,014 0,015 0,019 0,022 0,015 0,016 0,017 0,020 0,023 0,015 0,016 0,017 0,021 0,024 contacts : normally closed = NC, normally open = NO switching action: maintained action = MA (changeable to momentary action, reversible) connection method : PCB terminal = P, soldering-/plug-in terminal = circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 597 01.2002 Swisstac Pushbuttons for standard mounting keylock switch 2 positions 45 - 70 mm 0 keylock switch 2 positions 45 - 70 mm standard lock B2 300, other lock numbers on request M MA P P 2 NC + 2 NO M MA P P 45 mm 1 NC + 1 NO M MA - 2 NC + 2 NO M MA - 52 mm 1 NC + 1 NO M MA P P 2 NC + 2 NO M MA P P 3 NC + 3 NO M MA P P 4 NC + 4 NO M MA P P 5 NC + 5 NO M MA P P Continued on next page 598 01.2002 key removable in A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C part no. 781-.401-0P 771-.401-0P 761-.401-0P 782-.401-0P 772-.401-0P 762-.401-0P 781-.401-00 771-.401-00 761-.401-00 782-.401-00 772-.401-00 762-.401-00 931-.401-0P 921-.401-0P 911-.401-0P 932-.401-0P 922-.401-0P 912-.401-0P 933-.401-0P 923-.401-0P 913-.401-0P 934-.401-0P 924-.401-0P 914-.401-0P 935-.401-0P 925-.401-0P 915-.401-0P 21 20 20 23 22 22 21 20 20 23 22 22 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 21 21 21 21 21 21 22 22 22 22 22 22 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 component layout mounting depth 42 mm contacts degree of protection IP 40 mounting dimensions 1 NC + 1 NO C C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing d front cap for keylock-/selector switch 2 positions page 625 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e 0,022 0,022 0,022 0,023 0,023 0,023 0,022 0,022 0,022 0,023 0,023 0,023 0,024 0,024 0,024 0,025 0,025 0,025 0,026 0,026 0,026 0,029 0,029 0,029 0,032 0,032 0,032 0 keylock switch 2 positions 45 - 70 mm standard lock B2 300, other lock numbers on request M MA - 2 NC + 2 NO M MA - 3 NC + 3 NO M MA - 4 NC + 4 NO M MA - 5 NC + 5 NO M MA - 67 mm 1 NC + 1 NO M MA P P 2 NC + 2 NO M MA P P 3 NC + 3 NO M MA P P 4 NC + 4 NO M MA P P 5 NC + 5 NO M MA P P 70 mm 1 NC + 1 NO M MA - 2 NC + 2 NO M MA - 3 NC + 3 NO M MA - 4 NC + 4 NO M MA - 5 NC + 5 NO M MA - key removable in A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C part no. 931-.401-00 921-.401-00 911-.401-00 932-.401-00 922-.401-00 912-.401-00 933-.401-00 923-.401-00 913-.401-00 934-.401-00 924-.401-00 914-.401-00 935-.401-00 925-.401-00 915-.401-00 831-.401-0P 821-.401-0P 811-.401-0P 832-.401-0P 822-.401-0P 812-.401-0P 833-.401-0P 823-.401-0P 813-.401-0P 834-.401-0P 824-.401-0P 814-.401-0P 835-.401-0P 825-.401-0P 815-.401-0P 831-.401-00 821-.401-00 811-.401-00 832-.401-00 822-.401-00 812-.401-00 833-.401-00 823-.401-00 813-.401-00 834-.401-00 824-.401-00 814-.401-00 835-.401-00 825-.401-00 815-.401-00 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 Continued on next page 599 01.2002 component layout mounting depth 55 mm contacts degree of protection mounting dimensions 1 NC + 1 NO C C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing Swisstac Pushbuttons for standard mounting 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e 0,024 0,024 0,024 0,025 0,025 0,025 0,027 0,027 0,027 0,030 0,030 0,030 0,033 0,033 0,033 0,026 0,026 0,026 0,027 0,027 0,027 0,028 0,028 0,028 0,031 0,031 0,031 0,034 0,034 0,034 0,026 0,026 0,026 0,027 0,027 0,027 0,029 0,029 0,029 0,032 0,032 0,032 0,035 0,035 0,035 0 keylock switch 2 positions 45 - 70 mm standard lock B2 300, other lock numbers on request M MA P P 2 NC + 2 NO M MA P P 45 mm 1 NC + 1 NO M MA - 2 NC + 2 NO M MA - 52 mm 1 NC + 1 NO M MA P P 2 NC + 2 NO M MA P P 3 NC + 3 NO M MA P P 4 NC + 4 NO M MA P P 5 NC + 5 NO M MA P P 55 mm 1 NC + 1 NO M MA - 2 NC + 2 NO M MA - 3 NC + 3 NO M MA - 4 NC + 4 NO M MA - 5 NC + 5 NO M MA - Continued on next page 600 01.2002 key removable in A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C part no. 781-.401-WP 771-.401-WP 761-.401-WP 782-.401-WP 772-.401-WP 762-.401-WP 781-.401-W0 771-.401-W0 761-.401-W0 782-.401-W0 772-.401-W0 762-.401-W0 931-.401-WP 921-.401-WP 911-.401-WP 932-.401-WP 922-.401-WP 912-.401-WP 933-.401-WP 923-.401-WP 913-.401-WP 934-.401-WP 924-.401-WP 914-.401-WP 935-.401-WP 925-.401-WP 915-.401-WP 931-.401-W0 921-.401-W0 911-.401-W0 932-.401-W0 922-.401-W0 912-.401-W0 933-.401-W0 923-.401-W0 913-.401-W0 934-.401-W0 924-.401-W0 914-.401-W0 935-.401-W0 925-.401-W0 915-.401-W0 21 20 20 23 22 22 21 20 20 23 22 22 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 21 21 21 21 21 21 22 22 22 22 22 22 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 component layout mounting depth 42 mm contacts degree of protection IP 65 mounting dimensions 1 NC + 1 NO C C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing Swisstac Pushbuttons for standard mounting 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e 0,022 0,022 0,022 0,023 0,023 0,023 0,022 0,022 0,022 0,023 0,023 0,023 0,024 0,024 0,024 0,025 0,025 0,025 0,026 0,026 0,026 0,029 0,029 0,029 0,032 0,032 0,032 0,024 0,024 0,024 0,025 0,025 0,025 0,027 0,027 0,027 0,030 0,030 0,030 0,033 0,033 0,033 0 keylock switch 2 positions 45 - 70 mm standard lock B2 300, other lock numbers on request M MA P P 2 NC + 2 NO M MA P P 3 NC + 3 NO M MA P P 4 NC + 4 NO M MA P P 5 NC + 5 NO M MA P P 70 mm 1 NC + 1 NO M MA - 2 NC + 2 NO M MA - 3 NC + 3 NO M MA - 4 NC + 4 NO M MA - 5 NC + 5 NO M MA - key removable in A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C part no. 831-.401-WP 821-.401-WP 811-.401-WP 832-.401-WP 822-.401-WP 812-.401-WP 833-.401-WP 823-.401-WP 813-.401-WP 834-.401-WP 824-.401-WP 814-.401-WP 835-.401-WP 825-.401-WP 815-.401-WP 831-.401-W0 821-.401-W0 811-.401-W0 832-.401-W0 822-.401-W0 812-.401-W0 833-.401-W0 823-.401-W0 813-.401-W0 834-.401-W0 824-.401-W0 814-.401-W0 835-.401-W0 825-.401-W0 815-.401-W0 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 component layout mounting depth 67 mm contacts degree of protection mounting dimensions 1 NC + 1 NO C C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing Swisstac Pushbuttons for standard mounting 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e 0,026 0,026 0,026 0,027 0,027 0,027 0,028 0,028 0,028 0,031 0,031 0,031 0,034 0,034 0,034 0,026 0,026 0,026 0,027 0,027 0,027 0,029 0,029 0,029 0,032 0,032 0,032 0,035 0,035 0,035 contacts : normally closed = NC, normally open = NO switching action : maintained action = MA, momentary action = M connection method : PCB terminal = P, soldering-/plug-in terminal = other key removable combination on request hint: - we recommend to use location strip no. 260-0020-00 for anti-twisting of the front bezel. - at momentary position the overturning force is max. 60 Ncm. circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 601 01.2002 Swisstac Pushbuttons for standard mounting keylock switch 3 positions 45 mm 0 keylock switch 3 positions 45 mm standard lock B2 300, other lock numbers on request mounting depth 42 mm 45 mm IP 65 42 mm 45 mm 2 NC + 2 NO 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA 2 NC + 2 NO 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA 2 NC + 2 NO 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA 2 NC + 2 NO 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA P P P P P P P P P P - key removable in B+A+C A A+C B+A B+A+C B+A+C A A+C B+A B+A+C B+A+C A A+C B+A B+A+C B+A+C A A+C B+A B+A+C part no. 722-.401-0P 732-.401-0P 752-.401-0P 742-.401-0P 712-.401-0P 722-.401-00 732-.401-00 752-.401-00 742-.401-00 712-.401-00 722-.401-WP 732-.401-WP 752-.401-WP 742-.401-WP 712-.401-WP 722-.401-W0 732-.401-W0 752-.401-W0 742-.401-W0 712-.401-W0 32 33 35 34 32 32 33 35 34 32 32 33 35 34 32 32 33 35 34 32 21 21 21 21 21 22 22 22 22 22 21 21 21 21 21 22 22 22 22 22 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 component layout degree of protection IP 40 mounting dimensions C contacts B technical drawing A B circuit drawing mom. 60 A switching action maint. 90 connection method d front cap for keylock-/selector switch 3 positions page 626 1 1 1 1 1 1 1 1 1 1 e 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 contacts : normally closed = NC, normally open = NO switching action: maintained action = MA, momentary action = M connection method : PCB terminal = P, soldering-/plug-in terminal = other key removable combination on request hint: - we recommend to use location strip no. 260-0020-00 for anti-twisting of the front bezel. - at momentary position the overturning force is max. 60 Ncm. circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 602 01.2002 Swisstac Pushbuttons for standard mounting selector switch 2 positions 45 - 70 mm selector switch 2 positions 45 - 70 mm mounting depth 42 mm 1 NC + 1 NO 2 NC + 2 NO 45 mm 1 NC + 1 NO 2 NC + 2 NO 52 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 55 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 67 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA P P P P P P P P P P P P P P P P P P P P P P P P part no. 781-.700-0P 761-.700-0P 782-.700-0P 762-.700-0P 781-.700-00 761-.700-00 782-.700-00 762-.700-00 931-.700-0P 911-.700-0P 932-.700-0P 912-.700-0P 933-.700-0P 913-.700-0P 934-.700-0P 914-.700-0P 935-.700-0P 915-.700-0P 931-.700-00 911-.700-00 932-.700-00 912-.700-00 933-.700-00 913-.700-00 934-.700-00 914-.700-00 935-.700-00 915-.700-00 831-.700-0P 811-.700-0P 832-.700-0P 812-.700-0P 833-.700-0P 813-.700-0P 834-.700-0P 814-.700-0P 835-.700-0P 815-.700-0P 37 36 39 38 37 36 39 38 41 40 39 38 43 42 45 44 47 46 41 40 39 38 43 42 45 44 47 46 41 40 39 38 43 42 45 44 47 46 27 27 27 27 28 28 28 28 29 29 29 29 29 29 29 29 29 29 30 30 30 30 30 30 30 30 30 30 31 31 31 31 31 31 31 31 31 31 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Continued on next page 603 01.2002 component layout degree of protection IP 40 contacts 0 mounting dimensions C C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing d front cap for keylock-/selector switch 2 positions page 625 d lever page 627 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e 0,011 0,011 0,012 0,012 0,011 0,011 0,012 0,012 0,013 0,013 0,014 0,014 0,015 0,015 0,018 0,018 0,022 0,022 0,013 0,013 0,014 0,014 0,015 0,015 0,019 0,019 0,023 0,023 0,015 0,015 0,016 0,016 0,017 0,017 0,020 0,020 0,024 0,024 selector switch 2 positions 45 - 70 mm degree of protection IP 40 mounting depth 70 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO IP 65 42 mm 1 NC + 1 NO 2 NC + 2 NO 45 mm 1 NC + 1 NO 2 NC + 2 NO 52 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 55 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 67 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO Continued on next page 604 01.2002 M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA P P P P P P P P P P P P P P P P P P P P P P P P part no. 831-.700-00 811-.700-00 832-.700-00 812-.700-00 833-.700-00 813-.700-00 834-.700-00 814-.700-00 835-.700-00 815-.700-00 781-.700-WP 761-.700-WP 782-.700-WP 762-.700-WP 781-.700-W0 761-.700-W0 782-.700-W0 762-.700-W0 931-.700-WP 911-.700-WP 932-.700-WP 912-.700-WP 933-.700-WP 913-.700-WP 934-.700-WP 914-.700-WP 935-.700-WP 915-.700-WP 931-.700-W0 911-.700-W0 932-.700-W0 912-.700-W0 933-.700-W0 913-.700-W0 934-.700-W0 914-.700-W0 935-.700-W0 915-.700-W0 831-.700-WP 811-.700-WP 832-.700-WP 812-.700-WP 833-.700-WP 813-.700-WP 834-.700-WP 814-.700-WP 835-.700-WP 815-.700-WP 41 40 39 38 43 42 45 44 47 46 37 36 39 38 37 36 39 38 41 40 39 38 43 42 45 44 47 46 41 40 39 38 43 42 45 44 47 46 41 40 39 38 43 42 45 44 47 46 32 32 32 32 32 32 32 32 32 32 27 27 27 27 28 28 28 28 29 29 29 29 29 29 29 29 29 29 30 30 30 30 30 30 30 30 30 30 31 31 31 31 31 31 31 31 31 31 10 10 10 10 10 10 10 10 10 10 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 component layout 0 contacts C mounting dimensions C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing Swisstac Pushbuttons for standard mounting 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e 0,015 0,015 0,016 0,016 0,017 0,017 0,021 0,021 0,025 0,025 0,011 0,011 0,012 0,012 0,011 0,011 0,012 0,012 0,013 0,013 0,014 0,014 0,015 0,015 0,018 0,018 0,022 0,022 0,013 0,013 0,014 0,014 0,015 0,015 0,019 0,019 0,023 0,023 0,015 0,015 0,016 0,016 0,017 0,017 0,020 0,020 0,024 0,024 selector switch 2 positions 45 - 70 mm degree of protection IP 65 mounting depth 70 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO M MA M MA M MA M MA M MA - part no. 831-.700-W0 811-.700-W0 832-.700-W0 812-.700-W0 833-.700-W0 813-.700-W0 834-.700-W0 814-.700-W0 835-.700-W0 815-.700-W0 41 40 39 38 43 42 45 44 47 46 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 11 component layout 0 contacts C mounting dimensions C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing Swisstac Pushbuttons for standard mounting e 0,015 0,015 0,016 0,016 0,017 0,017 0,021 0,021 0,025 0,025 contacts : normally closed = NC, normally open = NO switching action : maintained action = MA, momentary action = M connection method : PCB terminal = P, soldering-/plug-in terminal = hint: - we recommend to use location strip no. 260-0020-00 for anti-twisting of the front bezel. - at momentary position the overturning force is max. 60 Ncm. circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 605 01.2002 Swisstac Pushbuttons for standard mounting selector switch 3 positions 45 mm selector switch 3 positions 45 mm IP 65 mounting depth 42 mm 2 NC + 2 NO 45 mm 2 NC + 2 NO 42 mm 2 NC + 2 NO 45 mm 2 NC + 2 NO 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA P P P P P P P P P P - part no. 722-.700-0P 732-.700-0P 752-.700-0P 742-.700-0P 712-.700-0P 722-.700-00 732-.700-00 752-.700-00 742-.700-00 712-.700-00 722-.700-WP 732-.700-WP 752-.700-WP 742-.700-WP 712-.700-WP 722-.700-W0 732-.700-W0 752-.700-W0 742-.700-W0 712-.700-W0 48 49 51 50 48 48 49 51 50 48 48 49 51 50 48 48 49 51 50 48 27 27 27 27 27 28 28 28 28 28 27 27 27 27 27 28 28 28 28 28 10 10 10 10 10 10 10 10 10 10 11 11 11 11 11 11 11 11 11 11 component layout degree of protection IP 40 mounting dimensions C 0 technical drawing B C connection method A B switching action mom. 60 A contacts maint. 90 circuit drawing d front cap for keylock-/selector switch 3 positions page 626 d lever page 627 1 1 1 1 1 1 1 1 1 1 e 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 contacts : normally closed = NC, normally open = NO switching action: maintained action = MA, momentary action = M connection method : PCB terminal = P, soldering-/plug-in terminal = hint: - we recommend to use location strip no. 260-0020-00 for anti-twisting of the front bezel. - at momentary position the overturning force is max. 60 Ncm. circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 606 01.2002 Pushbuttons for standard mounting Swisstac buzzer 30 - 55 mm part no. 970-.000-K0 970-.000-0P 970-.000-00 52 52 52 2 4 5 12 12 12 component layout buzzer socket MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 P - mounting dimensions mounting depth 30 mm 52 mm 55 mm technical drawing degree of protection IP 40 circuit drawing buzzer 30 - 55 mm connection method d buzzer element page 627 d front bezel for buzzer 30 - 55 mm page 628 1 e 0,004 0,007 0,007 connection method : soldering-/plug-in terminal = -, PCB terminal = P the buzzer 55 mm is as long as the corresponding illuminated pushbutton and fits to the PCB plug-in base and multi plug housing circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 push-pull illuminated switch 45 mm 45 mm 2 NC + 2 NO M-0-M - 53 53 53 53 33 33 34 34 13 13 13 13 component layout P mounting dimensions M-0-M 18 mm dia. Typ-Nr. 792-1000-0P 792-2000-0P 792-1000-00 792-2000-00 technical drawing connection method 2 NC + 2 NO colour of front bezel grey black grey black circuit drawing switching action push-pull illuminated switch 45 mm IP 40, lampholder MG T 1 3/4 mounting depth 42 mm contacts d push-pull knob page 627 d filament lamp MG T 1 3/4 page 634 d LED MG T 1 3/4 page 634 1 1 e 0,015 0,015 0,015 0,015 contacts : normally closed = NC, normally open = NO switching action: maintained action = MA, momentary action = M connection method : PCB terminal = P, soldering-/plug-in terminal = circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 607 01.2002 Swisstac Pushbuttons for Flush mounting indicator actuator 41-44 mm for flush mounting 25 mm dia. part no. components layout IP 40 IP 65 b 24 x 24 mm part no. mounting dimension indicator actuator 41-44 mm for flush mounting lamp socket MG T 1 3/4 a 24 x 30 mm part no. technical drawing degree of protection circuit drawing d lens for 35 mm page 622 d front bezel-set for flush mounting page 628 d filament lamp MG T 1 3/4 page 634 d LED MG T 1 3/4 page 634 d lamp element block for 35 mm page 632 690-6000-00 690-4000-00 690-2000-00 1 35 14 - 0,004 690-6000-W0 690-4000-W0 690-2000-W0 1 35 14 - 0,005 circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652 608 01.2002 e Swisstac Pushbuttons for Flush mounting indicator for flush mounting 39 - 79 mm protection degree IP 40 part no. 990-.000-K0 890-.000-K0 990-.000-0P 990-.000-00 890-.000-0P 890-.000-00 1 1 1 1 1 1 36 37 38 39 40 41 14 14 14 14 14 14 component layout lamp socket MG T 1 3/4 T 5.5 MG T 1 3/4 MG T 1 3/4 T 5.5 T 5.5 mounting dimensions P P - technical drawing mounting depth 39 mm 54 mm 61 mm 64 mm 76 mm 79 mm circuit drawing indicator for flush mounting 39 - 79 mm connection method d lens page 623 d front bezel for indicator 39 - 79 mm page 627 d front bezel-set for flush mounting page 628 d filament lamp MG T 1 3/4 page 634 d LED MG T 1 3/4 page 634 d filament lamp T 5.5 page 634 d LED T 5.5 page 635 1 1 e 0,004 0,006 0,007 0,007 0,010 0,010 connection method : soldering-/plug-in terminal = -, PCB terminal = P The indicators 55 mm and 70 mm are as long as the corresponding illuminated pushbuttons and fit to the PCB plug-in base and multi-plug housing. circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 609 01.2002 Swisstac Pushbuttons for Flush mounting illuminated-/pushbutton actuator 41-44 mm for flush mounting b 24 x 24 mm Typ-Nr. M 25 mm dia. Typ-Nr. 680-2000-00 680-4000-00 680-6000-00 MA (M) 600-2000-00 600-4000-00 600-6000-00 IP 65 M 680-2000-W0 680-4000-W0 680-6000-W0 MA (M) 600-2000-W0 600-4000-W0 600-6000-W0 switching action : momentary action = M, maintained action = MA circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652 610 01.2002 mounting dimensions 24 x 30 mm Typ-Nr. technical drawing component layout a circuit drawing illuminated-/pushbutton actuator 41-44 mm for flush mounting degree of protection IP 40 switching action d lens page 623 d filament lamp MG T 1 3/4 page 634 d LED MG T 1 3/4 page 634 d snap-action switching element block for 35 mm page 631 e 54 54 54 55 55 55 54 54 54 55 55 55 35 35 35 35 35 35 35 35 35 35 35 35 14 14 14 14 14 14 14 14 14 14 14 14 0,004 0,004 0,004 0,004 0,004 0,004 0,005 0,005 0,005 0,005 0,005 0,005 Swisstac Pushbuttons for Flush mounting pushbutton-/illuminated pushbutton for flush mounting 61 - 79 mm protection degree IP 40 2 NC + 2 NO maintained P 3 NC + 3 NO maintained P 4 NC + 4 NO maintained P 5 NC + 5 NO maintained P 1 NC + 1 NO maintained - 2 NC + 2 NO maintained - 3 NC + 3 NO maintained - 4 NC + 4 NO maintained - 5 NC + 5 NO maintained - 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO maintained maintained maintained maintained maintained maintained maintained maintained maintained maintained P P P P P - component layout P mounting dimensions maintained technical drawing 79 mm 1 NC + 1 NO lamp socket MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 T 5.5 T 5.5 T 5.5 T 5.5 T 5.5 T 5.5 T 5.5 T 5.5 T 5.5 T 5.5 circuit drawing 76 mm connection method 64 mm switching action pushbutton-/illuminated pushbutton for flush mounting 61 - 79 mm mounting depth 61 mm contacts d lens page 623 d front bezel for illuminated-/pushbutton 61 - 79 mm page 627 d front bezel-set for flush mounting page 628 d filament lamp MG T 1 3/4 page 634 d LED MG T 1 3/4 page 634 d filament lamp T 5.5 page 634 d LED T 5.5 page 635 e 4 42 14 1 0,013 902-.000-0P 5 42 14 1 0,014 903-.000-0P 6 42 14 1 0,014 904-.000-0P 7 42 14 1 0,018 905-.000-0P 8 42 14 1 0,021 901-.000-00 4 43 14 0,013 902-.000-00 5 43 14 0,014 903-.000-00 6 43 14 0,015 904-.000-00 7 43 14 0,019 905-.000-00 8 43 14 0,022 801-.000-0P 802-.000-0P 803-.000-0P 804-.000-0P 805-.000-0P 801-.000-00 802-.000-00 803-.000-00 804-.000-00 805-.000-00 4 5 6 7 8 4 5 6 7 8 44 44 44 44 44 45 45 45 45 45 14 14 14 14 14 14 14 14 14 14 part no. 901-.000-0P 1 1 1 1 1 0,015 0,016 0,014 0,020 0,023 0,015 0,016 0,017 0,021 0,024 contacts : normally closed = NC, normally open = NO switching action: (changeable to momentary, reversible) connection method : PCB terminal = P, soldering-/plug-in terminal = circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 611 01.2002 Swisstac Pushbuttons for Flush mounting keylock switch 2 positions for flush mounting 51 - 79 mm 0 keylock switch 2 positions for flush mounting 51 - 79 mm M MA P P 2 NC + 2 NO M MA P P 54 mm 1 NC + 1 NO M MA - 2 NC + 2 NO M MA - 61 mm 1 NC + 1 NO M MA P P 2 NC + 2 NO M MA P P 3 NC + 3 NO M MA P P 4 NC + 4 NO M MA P P 5 NC + 5 NO M MA P P Continued on next page 612 01.2002 key removable in A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C part no. 781-.401-0P 771-.401-0P 761-.401-0P 782-.401-0P 772-.401-0P 762-.401-0P 781-.401-00 771-.401-00 761-.401-00 782-.401-00 772-.401-00 762-.401-00 931-.401-0P 921-.401-0P 911-.401-0P 932-.401-0P 922-.401-0P 912-.401-0P 933-.401-0P 923-.401-0P 913-.401-0P 934-.401-0P 924-.401-0P 914-.401-0P 935-.401-0P 925-.401-0P 915-.401-0P 21 20 20 23 22 22 21 20 20 23 22 22 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 46 46 46 46 46 46 47 47 47 47 47 47 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 component layout mounting depth 51 mm contacts degree of protection IP 40 mounting dimensions 1 NC + 1 NO C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing d front cap for keylock-/selector switch 2 positions page 625 d front bezel-set for flush mounting page 628 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e 0,022 0,022 0,022 0,023 0,023 0,023 0,022 0,022 0,022 0,023 0,023 0,023 0,024 0,024 0,024 0,025 0,025 0,025 0,026 0,026 0,026 0,029 0,029 0,029 0,032 0,032 0,032 0 keylock switch 2 positions for flush mounting 51 - 79 mm M MA - 2 NC + 2 NO M MA - 3 NC + 3 NO M MA - 4 NC + 4 NO M MA - 5 NC + 5 NO M MA - 76 mm 1 NC + 1 NO M MA P P 2 NC + 2 NO M MA P P 3 NC + 3 NO M MA P P 4 NC + 4 NO M MA P P 5 NC + 5 NO M MA P P 79 mm 1 NC + 1 NO M MA - 2 NC + 2 NO M MA - 3 NC + 3 NO M MA - 4 NC + 4 NO M MA - 5 NC + 5 NO M MA - IP 65 51 mm 1 NC + 1 NO M MA P P 2 NC + 2 NO M MA P P key removable in A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C part no. 931-.401-00 921-.401-00 911-.401-00 932-.401-00 922-.401-00 912-.401-00 933-.401-00 923-.401-00 913-.401-00 934-.401-00 924-.401-00 914-.401-00 935-.401-00 925-.401-00 915-.401-00 831-.401-0P 821-.401-0P 811-.401-0P 832-.401-0P 822-.401-0P 812-.401-0P 833-.401-0P 823-.401-0P 813-.401-0P 834-.401-0P 824-.401-0P 814-.401-0P 835-.401-0P 825-.401-0P 815-.401-0P 831-.401-00 821-.401-00 811-.401-00 832-.401-00 822-.401-00 812-.401-00 833-.401-00 823-.401-00 813-.401-00 834-.401-00 824-.401-00 814-.401-00 835-.401-00 825-.401-00 815-.401-00 781-.401-WP 771-.401-WP 761-.401-WP 782-.401-WP 772-.401-WP 762-.401-WP 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 21 20 20 23 22 22 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 46 46 46 46 46 46 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Continued on next page 613 01.2002 component layout mounting depth 64 mm contacts degree of protection IP 40 mounting dimensions 1 NC + 1 NO C C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing Swisstac Pushbuttons for Flush mounting 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e 0,024 0,024 0,024 0,025 0,025 0,025 0,027 0,027 0,027 0,030 0,030 0,030 0,033 0,033 0,033 0,026 0,026 0,026 0,027 0,027 0,027 0,028 0,028 0,028 0,031 0,031 0,031 0,034 0,034 0,034 0,026 0,026 0,026 0,027 0,027 0,027 0,029 0,029 0,029 0,032 0,032 0,032 0,035 0,035 0,035 0,022 0,022 0,022 0,023 0,023 0,023 0 keylock switch 2 positions for flush mounting 51 - 79 mm M MA - 2 NC + 2 NO M MA - 61 mm 1 NC + 1 NO M MA P P 2 NC + 2 NO M MA P P 3 NC + 3 NO M MA P P 4 NC + 4 NO M MA P P 5 NC + 5 NO M MA P P 64 mm 1 NC + 1 NO M MA - 2 NC + 2 NO M MA - 3 NC + 3 NO M MA - 4 NC + 4 NO M MA - 5 NC + 5 NO M MA - 76 mm 1 NC + 1 NO M MA P P 2 NC + 2 NO M MA P P 3 NC + 3 NO M MA P P 4 NC + 4 NO M MA P P 5 NC + 5 NO M MA P P Continued on next page 614 01.2002 key removable in A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C A A A+C part no. 781-.401-W0 771-.401-W0 761-.401-W0 782-.401-W0 772-.401-W0 762-.401-W0 931-.401-WP 921-.401-WP 911-.401-WP 932-.401-WP 922-.401-WP 912-.401-WP 933-.401-WP 923-.401-WP 913-.401-WP 934-.401-WP 924-.401-WP 914-.401-WP 935-.401-WP 925-.401-WP 915-.401-WP 931-.401-W0 921-.401-W0 911-.401-W0 932-.401-W0 922-.401-W0 912-.401-W0 933-.401-W0 923-.401-W0 913-.401-W0 934-.401-W0 924-.401-W0 914-.401-W0 935-.401-W0 925-.401-W0 915-.401-W0 831-.401-WP 821-.401-WP 811-.401-WP 832-.401-WP 822-.401-WP 812-.401-WP 833-.401-WP 823-.401-WP 813-.401-WP 834-.401-WP 824-.401-WP 814-.401-WP 835-.401-WP 825-.401-WP 815-.401-WP 21 20 20 23 22 22 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 47 47 47 47 47 47 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 component layout mounting depth 54 mm contacts degree of protection IP 65 mounting dimensions 1 NC + 1 NO C C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing Swisstac Pushbuttons for Flush mounting 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e 0,022 0,022 0,022 0,023 0,023 0,023 0,024 0,024 0,024 0,025 0,025 0,025 0,026 0,026 0,026 0,029 0,029 0,029 0,032 0,032 0,032 0,024 0,024 0,024 0,025 0,025 0,025 0,027 0,027 0,027 0,030 0,030 0,030 0,033 0,033 0,033 0,026 0,026 0,026 0,027 0,027 0,027 0,028 0,028 0,028 0,031 0,031 0,031 0,034 0,034 0,034 0 keylock switch 2 positions for flush mounting 51 - 79 mm M MA - 2 NC + 2 NO M MA - 3 NC + 3 NO M MA - 4 NC + 4 NO M MA - 5 NC + 5 NO M MA - key removable in A A A+C A A A+C A A A+C A A A+C A A A+C part no. 831-.401-W0 821-.401-W0 811-.401-W0 832-.401-W0 822-.401-W0 812-.401-W0 833-.401-W0 823-.401-W0 813-.401-W0 834-.401-W0 824-.401-W0 814-.401-W0 835-.401-W0 825-.401-W0 815-.401-W0 25 24 24 23 22 22 27 26 26 29 28 28 31 30 30 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 component layout mounting depth 79 mm contacts degree of protection IP 65 mounting dimensions 1 NC + 1 NO C C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing Swisstac Pushbuttons for Flush mounting e 0,026 0,026 0,026 0,027 0,027 0,027 0,029 0,029 0,029 0,032 0,032 0,032 0,035 0,035 0,035 contacts : normally closed = NC, normally open = NO switching action : maintained action = MA, momentary action = M connection method : PCB terminal = P, soldering-/plug-in terminal = other key removable combination on request hint: - we recommend to use location strip no. 260-0020-00 for anti-twisting of the front bezel. - at momentary position the overturning force is max. 60 Ncm. circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 615 01.2002 Swisstac Pushbuttons for Flush mounting keylock switch with 3 positions for flush mounting 51 - 54 mm 0 keylock switch with 3 positions for flush mounting 51 - 54 mm IP 65 mounting depth 51 mm 2 NC + 2 NO 54 mm 2 NC + 2 NO 51 mm 2 NC + 2 NO 54 mm 2 NC + 2 NO 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA P P P P P P P P P P - key removable in B+A+C A A+C B+A B+A+C B+A+C A A+C B+A B+A+C B+A+C A A+C B+A B+A+C B+A+C A A+C B+A B+A+C part no. 722-.401-0P 732-.401-0P 752-.401-0P 742-.401-0P 712-.401-0P 722-.401-00 732-.401-00 752-.401-00 742-.401-00 712-.401-00 722-.401-WP 732-.401-WP 752-.401-WP 742-.401-WP 712-.401-WP 722-.401-W0 732-.401-W0 752-.401-W0 742-.401-W0 712-.401-W0 32 33 35 34 32 32 33 35 34 32 32 33 35 34 32 32 33 35 34 32 46 46 46 46 46 47 47 47 47 47 46 46 46 46 46 47 47 47 47 47 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 component layout degree of protection IP 40 mounting dimensions C contacts B technical drawing A B connection method mom. 60 A switching action maint. 90 circuit drawing d front cap for keylock-/selector switch 3 positions 626 d front bezel-set for flush mounting page 628 1 1 1 1 1 1 1 1 1 1 e 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 0,023 contacts : normally closed = NC, normally open = NO switching action : maintained action = MA, momentary action = M connection method : PCB terminal = P, soldering-/plug-in terminal = other key removable combination on request hint: - we recommend to use location strip no. 260-0020-00 for anti-twisting of the front bezel. - at momentary position the overturning force is max. 60 Ncm. circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 616 01.2002 Swisstac Pushbuttons for Flush mounting selector switch 2 positions for flush mounting 51 - 79 mm selector switch 2 positions for flush mounting 51 - 79 mm degree of protection IP 40 mounting depth 51 mm 1 NC + 1 NO 2 NC + 2 NO 54 mm 1 NC + 1 NO 2 NC + 2 NO 61 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 64 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA P P P P P P P P P P P P P P - part no. 781-.700-0P 761-.700-0P 782-.700-0P 762-.700-0P 781-.700-00 761-.700-00 782-.700-00 762-.700-00 931-.700-0P 911-.700-0P 932-.700-0P 912-.700-0P 933-.700-0P 913-.700-0P 934-.700-0P 914-.700-0P 935-.700-0P 915-.700-0P 931-.700-00 911-.700-00 932-.700-00 912-.700-00 933-.700-00 913-.700-00 934-.700-00 914-.700-00 935-.700-00 915-.700-00 37 36 39 38 37 36 39 38 41 40 39 38 43 42 45 44 47 46 41 40 39 38 43 42 45 44 47 46 52 52 52 52 53 53 53 53 54 54 54 54 54 54 54 54 54 54 55 55 55 55 55 55 55 55 55 55 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 Continued on next page 617 01.2002 component layout 0 contacts C mounting dimensions C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing d front cap for keylock-/selector switch 2 positions page 625 d lever page 627 d front bezel-set for flush mounting page 628 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e 0,011 0,011 0,012 0,012 0,011 0,011 0,012 0,012 0,013 0,013 0,014 0,014 0,015 0,015 0,018 0,018 0,022 0,022 0,013 0,013 0,014 0,014 0,015 0,015 0,019 0,019 0,023 0,023 selector switch 2 positions for flush mounting 51 - 79 mm degree of protection IP 65 mounting depth 76 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 79 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 51 mm 1 NC + 1 NO 2 NC + 2 NO 54 mm 1 NC + 1 NO 2 NC + 2 NO 61 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 64 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO Continued on next page 618 01.2002 M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA P P P P P P P P P P P P P P P P P P P P P P P P - part no. 831-.700-0P 811-.700-0P 832-.700-0P 812-.700-0P 833-.700-0P 813-.700-0P 834-.700-0P 814-.700-0P 835-.700-0P 815-.700-0P 831-.700-00 811-.700-00 832-.700-00 812-.700-00 833-.700-00 813-.700-00 834-.700-00 814-.700-00 835-.700-00 815-.700-00 781-.700-WP 761-.700-WP 782-.700-WP 762-.700-WP 781-.700-W0 761-.700-W0 782-.700-W0 762-.700-W0 931-.700-WP 911-.700-WP 932-.700-WP 912-.700-WP 933-.700-WP 913-.700-WP 934-.700-WP 914-.700-WP 935-.700-WP 915-.700-WP 931-.700-W0 911-.700-W0 932-.700-W0 912-.700-W0 933-.700-W0 913-.700-W0 934-.700-W0 914-.700-W0 935-.700-W0 915-.700-W0 41 40 39 38 43 42 45 44 47 46 41 40 39 38 43 42 45 44 47 46 37 36 39 38 37 36 39 38 41 40 39 38 43 42 45 44 47 46 41 40 39 38 43 42 45 44 47 46 56 56 56 56 56 56 56 56 56 56 57 57 57 57 57 57 57 57 57 57 52 52 52 52 53 53 53 53 54 54 54 54 54 54 54 54 54 54 55 55 55 55 55 55 55 55 55 55 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 component layout 0 contacts C mounting dimensions C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing Swisstac Pushbuttons for Flush mounting 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e 0,015 0,015 0,016 0,016 0,017 0,017 0,020 0,020 0,024 0,024 0,015 0,015 0,016 0,016 0,017 0,017 0,021 0,021 0,025 0,025 0,011 0,011 0,012 0,012 0,011 0,011 0,012 0,012 0,013 0,013 0,014 0,014 0,015 0,015 0,018 0,018 0,022 0,022 0,013 0,013 0,014 0,014 0,015 0,015 0,019 0,019 0,023 0,023 selector switch 2 positions for flush mounting 51 - 79 mm degree of protection IP 65 mounting depth 76 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO 79 mm 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO 5 NC + 5 NO M MA M MA M MA M MA M MA M MA M MA M MA M MA M MA P P P P P P P P P P - part no. 831-.700-WP 811-.700-WP 832-.700-WP 812-.700-WP 833-.700-WP 813-.700-WP 834-.700-WP 814-.700-WP 835-.700-WP 815-.700-WP 831-.700-W0 811-.700-W0 832-.700-W0 812-.700-W0 833-.700-W0 813-.700-W0 834-.700-W0 814-.700-W0 835-.700-W0 815-.700-W0 41 40 39 38 43 42 45 44 47 46 41 40 39 38 43 42 45 44 47 46 56 56 56 56 56 56 56 56 56 56 57 57 57 57 57 57 57 57 57 57 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 component layout 0 contacts C mounting dimensions C technical drawing A connection method mom. 60 A switching action maint. 90 circuit drawing Swisstac Pushbuttons for Flush mounting 1 1 1 1 1 1 1 1 1 1 e 0,015 0,015 0,016 0,016 0,017 0,017 0,020 0,020 0,024 0,024 0,015 0,015 0,016 0,016 0,017 0,017 0,021 0,021 0,025 0,025 contacts : normally closed = NC, normally open = NO switching action : maintained action = MA, momentary action = M connection method : PCB terminal = P, soldering-/plug-in terminal = hint: - we recommend to use location strip no. 260-0020-00 for anti-twisting of the front bezel. - at momentary position the overturning force is max. 60 Ncm. circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 619 01.2002 Swisstac Pushbuttons for Flush mounting selector switch 3 positions for flush mounting 51 - 54 mm selector switch 3 positions for flush mounting 51 - 54 mm degree of protection IP 40 IP 65 mounting depth 51 mm 2 NC + 2 NO 54 mm 2 NC + 2 NO 51 mm 2 NC + 2 NO 54 mm 2 NC + 2 NO 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA 0 - MA - MA M-0-M M - 0 - MA MA - 0 - M MA - 0 - MA P P P P P P P P P P - part no. 722-.700-0P 732-.700-0P 752-.700-0P 742-.700-0P 712-.700-0P 722-.700-00 732-.700-00 752-.700-00 742-.700-00 712-.700-00 722-.700-WP 732-.700-WP 752-.700-WP 742-.700-WP 712-.700-WP 722-.700-W0 732-.700-W0 752-.700-W0 742-.700-W0 712-.700-W0 48 49 51 50 48 48 49 51 50 48 48 49 51 50 48 48 49 51 50 48 52 52 52 52 52 53 53 53 53 53 52 52 52 52 52 53 53 53 53 53 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 component layout 0 mounting dimensions C technical drawing C connection method A switching action B mom. 60 B A contacts maint. 90 circuit drawing d front cap for keylock-/selector switch 3 positions page 626 d lever page 627 d front bezel-set for flush mounting page 628 1 1 1 1 1 1 1 1 1 1 e 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 0,012 contacts : normally closed = NC, normally open = NO switching action: maintained action = MA, momentary action = M connection method : PCB terminal = P, soldering-/plug-in terminal = hint: - we recommend to use location strip no. 260-0020-00 for anti-twisting of the front bezel. - at momentary position the overturning force is max. 60 Ncm. circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 620 01.2002 Swisstac Pushbuttons for Flush mounting buzzer for flush mounting 39 - 64 mm P - part no. 970-.000-K0 970-.000-0P 970-.000-00 52 52 52 36 38 39 16 16 16 component layout buzzer socket MG T 1 3/4 MG T 1 3/4 MG T 1 3/4 mounting dimensions mounting depth 39 mm 61 mm 64 mm technical drawing degree of protection IP 40 circuit drawing buzzer for flush mounting 39 - 64 mm connection method d buzzer element page 627 d front bezel for buzzer 30 - 55 mm page 628 d front bezel set for flush mounting for buzzer page 628 1 e 0,004 0,007 0,007 connection method : soldering-/plug-in terminal = -, PCB terminal = P the buzzer 55 mm is as long as the corresponding illuminated pushbutton and fits to the PCB plug-in base and multi plug housing circuit drawings from page 657, technical drawings from page 642, mounting dimensions from page 652, component layouts from page 657 621 01.2002 Swisstac accessories at front lens for 35 mm for pushbuttons 35 mm a shape flat lens/support transparent/translucent of plastic (not recommended for film insert) flat transparent/transparent of plastic (not for film insert and illumination) flat opaque/translucent lens for 35 mm of plastic 622 01.2002 colour blue yellow green orange red white blue yellow green orange red white grey black 18 x 24 mm Typ-Nr. 600-5150-00 600-5170-00 600-5140-00 600-5110-00 600-5120-00 600-5160-00 600-5250-00 600-5270-00 600-5240-00 600-5210-00 600-5220-00 600-5260-00 600-5180-00 600-5190-00 b 18 x 18 mm Typ-Nr. 600-3150-00 600-3170-00 600-3140-00 600-3110-00 600-3120-00 600-3160-00 600-3250-00 600-3270-00 600-3240-00 600-3210-00 600-3220-00 600-3260-00 600-3180-00 600-3190-00 18 mm dia. Typ-Nr. 600-1150-00 600-1170-00 600-1140-00 600-1110-00 600-1120-00 600-1160-00 600-1250-00 600-1270-00 600-1240-00 600-1210-00 600-1220-00 600-1260-00 600-1180-00 600-1190-00 e 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 Swisstac accessories lens lens of plastic degree of protection IP 40 IP 65 front dimension pushbutton 18 x 18 mm shape flat lens/support transparent/ translucent 18 x 24 mm flat transparent/ translucent 24 x 24 mm flat transparent/ translucent 18 mm dia. flat transparent/ translucent 24 mm dia. flat transparent/ translucent 24 x 24 mm flat transparent/ translucent 24 mm dia. flat transparent/ translucent colour blue yellow green orange red white blue yellow green orange red white blue yellow green orange red white blue yellow green orange red white blue yellow green orange red white blue yellow green orange red white blue yellow green orange red white part no. 200-3150-00 200-3170-00 200-3140-00 200-3110-00 200-3120-00 200-3160-00 200-5150-00 200-5170-00 200-5140-00 200-5110-00 200-5120-00 200-5160-00 200-9150-00 200-9170-00 200-9140-00 200-9110-00 200-9120-00 200-9160-00 200-1150-00 200-1170-00 200-1140-00 200-1110-00 200-1120-00 200-1160-00 200-7150-00 200-7170-00 200-7140-00 200-7110-00 200-7120-00 200-7160-00 200-9150-W0 200-9170-W0 200-9140-W0 200-9110-W0 200-9120-W0 200-9160-W0 200-7150-W0 200-7170-W0 200-7140-W0 200-7110-W0 200-7120-W0 200-7160-W0 e 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 Continued on next page 623 01.2002 Swisstac accessories lens of plastic (not recommended for film insert) IP 40 IP 65 of plastic (not for film insert and illumination) IP 40 IP 65 624 01.2002 18 x 18 mm flat transparent/ transparent 18 x 24 mm flat transparent/ transparent 24 x 24 mm flat transparent/ transparent 18 mm dia. flat transparent/ transparent 24 mm dia. flat transparent/ transparent 24 x 24 mm flat transparent/ transparent 24 mm dia. flat transparent/ transparent 18 x 18 mm flat 18 x 24 mm flat 24 x 24 mm flat 18 mm dia. flat 24 mm dia. flat 24 x 24 mm flat 24 mm dia. flat opaque/translucent opaque/translucent opaque/translucent opaque/translucent opaque/translucent opaque/translucent opaque/translucent blue yellow green orange red white blue yellow green orange red white blue yellow green orange red white blue yellow green orange red white blue yellow green orange red white blue yellow green orange red white blue yellow green orange red white grey black grey black grey black grey black grey black grey black grey black 200-3250-00 200-3270-00 200-3240-00 200-3210-00 200-3220-00 200-3260-00 200-5250-00 200-5270-00 200-5240-00 200-5210-00 200-5220-00 200-5260-00 200-9250-00 200-9270-00 200-9240-00 200-9210-00 200-9220-00 200-9260-00 200-1250-00 200-1270-00 200-1240-00 200-1210-00 200-1220-00 200-1260-00 200-7250-00 200-7270-00 200-7240-00 200-7210-00 200-7220-00 200-7260-00 200-9250-W0 200-9270-W0 200-9240-W0 200-9210-W0 200-9220-W0 200-9260-W0 200-7250-W0 200-7270-W0 200-7240-W0 200-7210-W0 200-7220-W0 200-7260-W0 200-3180-00 200-3190-00 200-5180-00 200-5190-00 200-9180-00 200-9190-00 200-1180-00 200-1190-00 200-7180-00 200-7190-00 200-9180-W0 200-9190-W0 200-7180-W0 200-7190-W0 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,002 0,002 0,002 0,002 Swisstac accessories mushroom-head cap can only be used with front bezel 18 mm dia. a mushroom-head cap degree of protection IP 40 mushroom opaque colour yellow green red black 18 x 24 mm Typ-Nr. 200-5370-00 200-5340-00 200-5320-00 200-5390-00 b 24 x 24 mm Typ-Nr. 200-9370-00 200-9340-00 200-9320-00 200-9390-00 24 mm dia. Typ-Nr. 200-7370-00 200-7340-00 200-7320-00 200-7390-00 0,005 0,005 0,005 0,005 colour grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black part no. 200-3001-00 200-4001-00 200-5001-00 200-6001-00 200-9001-00 200-0001-00 200-1001-00 200-2001-00 200-7001-00 200-8001-00 200-3001-01 200-4001-01 200-5001-01 200-6001-01 200-9001-01 200-0001-01 200-1001-01 200-2001-01 200-7001-01 200-8001-01 200-3004-00 200-4004-00 200-5004-00 200-6004-00 200-9004-00 200-0004-00 200-1004-00 200-2004-00 200-7004-00 200-8004-00 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 e front cap for keylock-/selector switch 2 positions front cap for keylock-/selector switch 2 positions plastic, for types 761-... - 772-..., 911-... - 925-..., 811-... - 825-... plastic, for types 781-... - 782-..., 931-... - 935-..., 831-... - 835-... of plastic, fits for all types for switching action for IP 40/IP 65, will be deliverd assembled front dimension pushbutton 18 x 18 mm 0 - MA marking 0 - I (90) 18 x 24 mm 0 - MA 0 - I (90) 24 x 24 mm 0 - MA 0 - I (90) 18 mm dia. 0 - MA 0 - I (90) 24 mm dia. 0 - MA 0 - I (90) 18 x 18 mm 0-M 0 - I (60) 18 x 24 mm 0-M 0 - I (60) 24 x 24 mm 0-M 0 - I (60) 18 mm dia. 0-M 0 - I (60) 24 mm dia. 0-M 0 - I (60) 18 x 18 mm M- or MA action 18 x 24 mm M- or MA action 24 x 24 mm M- or MA action 18 mm dia. M- or MA action 24 mm dia. M- or MA action without marking without marking without marking without marking without marking e 625 01.2002 Swisstac accessories front cap for keylock-/selector switch 3 positions front cap for keylock-/selector switch 3 positions plastic, for type 712-... plastic, for type 722-... plastic, for type 732-... plastic, for type 742-... plastic, for type 752-... Continued on next page 626 01.2002 for switching action for IP 40/IP 65, will be deliverd assembled front dimension 18 x 18 mm M-0-M 18 x 24 mm M-0-M 24 x 24 mm M-0-M 18 mm dia. M-0-M 24 mm dia. M-0-M 18 x 18 mm 0-M-M 18 x 24 mm 0-M-M 24 x 24 mm 0-M-M 18 mm dia. 0-M-M 24 mm dia. 0-M-M 18 x 18 mm M-0-M 18 x 24 mm M-0-M 24 x 24 mm M-0-M 18 mm dia. M-0-M 24 mm dia. M-0-M 18 x 18 mm MA - 0 - M 18 x 24 mm MA - 0 - M 24 x 24 mm MA - 0 - M 18 mm dia. MA - 0 - M 24 mm dia. MA - 0 - M 18 x 18 mm M - 0 - MA 18 x 24 mm M - 0 - MA 24 x 24 mm M - 0 - MA 18 mm dia. M - 0 - MA 24 mm dia. M - 0 - MA marking I (90) - 0 - II (90) I (90) - 0 - II (90) I (90) - 0 - II (90) I (90) - 0 - II (90) I (90) - 0 - II (90) 0 (90) - I - II (90) 0 (90) - I - II (90) 0 (90) - I - II (90) 0 (90) - I - II (90) 0 (90) - I - II (90) I (60) - 0 - II (60) I (60) - 0 - II (60) I (60) - 0 - II (60) I (60) - 0 - II (60) I (60) - 0 - II (60) I (90) - 0 - II (60) I (90) - 0 - II (60) I (90) - 0 - II (60) I (90) - 0 - II (60) I (90) - 0 - II (60) I (60) - 0 - II (90) I (60) - 0 - II (90) I (60) - 0 - II (90) I (60) - 0 - II (90) I (60) - 0 - II (90) colour grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black grey black part no. 200-3002-00 200-4002-00 200-5002-00 200-6002-00 200-9002-00 200-0002-00 200-1002-00 200-2002-00 200-7002-00 200-8002-00 200-3003-01 200-4003-01 200-5003-01 200-6003-01 200-9003-01 200-0003-01 200-1003-01 200-2003-01 200-7003-01 200-8003-01 200-3002-02 200-4002-02 200-5002-02 200-6002-02 200-9002-02 200-0002-02 200-1002-02 200-2002-02 200-7002-02 200-8002-02 200-3002-03 200-4002-03 200-5002-03 200-6002-03 200-9002-03 200-0002-03 200-1002-03 200-2002-03 200-7002-03 200-8002-03 200-3002-04 200-4002-04 200-5002-04 200-6002-04 200-9002-04 200-0002-04 200-1002-04 200-2002-04 200-7002-04 200-8002-04 e 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 Swisstac accessories 18 x 18 mm front cap for keylock-/selector switch 3 positions of plastic, fits for all types 18 x 24 mm 24 x 24 mm 18 mm dia. 24 mm dia. M- or MA action M- or MA action M- or MA action M- or MA action M- or MA action without marking without marking without marking without marking without marking grey black grey black grey black grey black grey black 200-3004-00 200-4004-00 200-5004-00 200-6004-00 200-9004-00 200-0004-00 200-1004-00 200-2004-00 200-7004-00 200-8004-00 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 lever will be deliverd assembled lever construction short long colour black chromium-plated black chromium-plated part no. 200-.704-00 200-.604-00 200-.904-00 200-.804-00 e 0,001 0,001 0,001 0,001 buzzer element a buzzer element voltage 6 V AC/DC 12 V AC/DC 24 V AC/DC 18 x 24 mm Typ-Nr. 970-5006-00 970-6006-00 970-5012-00 970-6012-00 970-5024-00 970-6024-00 colour grey black grey black grey black b 24 x 24 mm Typ-Nr. 970-9006-00 970-0006-00 970-9012-00 970-0012-00 970-9024-00 970-0024-00 0,004 0,004 0,004 0,004 0,004 0,004 part no. 200-.255-00 200-.275-00 200-.245-00 200-.225-00 200-.265-00 0,003 0,003 0,003 0,003 0,003 part no. 200-3000-00 200-4000-00 200-5000-00 200-6000-00 200-9000-00 200-0000-00 200-1000-00 200-2000-00 200-7000-00 200-8000-00 200-9000-W0 200-0000-W0 200-7000-W0 200-8000-W0 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 e push-pull knob push-pull knob knob transparent colour blue yellow green red white e front bezel for illuminated-/pushbutton 55 - 70 mm and indicator 30 - 70 mm front bezel for illuminated-/ pushbutton 55 - 70 mm and indicator degree of protection IP 40 30 - 70 mm IP 65 front dimension 18 x 18 mm material plastic 18 x 24 mm plastic 24 x 24 mm plastic 18 mm dia. plastic 24 mm dia. plastic 24 x 24 mm plastic 24 mm dia. plastic colour grey black grey black grey black grey black grey black grey black grey black e 627 01.2002 Swisstac accessories front bezel for mushroon-head pushbutton 55 - 70 mm front bezel for mushroon-head pushbutton 55 - 70 mm degree of protection IP 40 material plastic colour grey black 18 mm dia. Typ-Nr. 200-1000-00 200-2000-00 e 0,002 0,002 front bezel for buzzer 30 - 55 mm a front bezel for buzzer 30 - 55 mm degree of protection IP 40 material plastic colour grey black 18 x 24 mm Typ-Nr. 200-5000-00 200-6000-00 b 24 x 24 mm Typ-Nr. 200-9000-00 200-0000-00 e 0,002 0,002 front bezel-set for flush mounting to us as IP 40: cut off (with knife) the anti-twisting at the front bezel/actuator a front bezel-set for flush mounting 24 x 24 mm 24 x 30 mm 25 mm dia. degree of protection IP 40/IP 65 material plastic colour black IP 40/IP 65 IP 40/IP 65 plastic plastic black black 18 x 24 mm Typ-Nr. b 18 x 18 mm Typ-Nr. 200-4400-V0 18 mm dia. Typ-Nr. e 0,007 200-6400-V0 200-8400-V0 0,008 0,006 front bezel set for flush mounting for buzzer to us as IP 40: cut off (with knife) the anti-twisting at the front bezel/actuator a front bezel set for flush mounting for buzzer 24 x 30 mm degree of protection IP 40 material plastic colour black 18 x 24 mm Typ-Nr. 200-6400-V0 e 0,008 protective cover for 35 mm a protective cover for 35 mm hinged, transparent, with means for sealing technical drawings from page 642 628 01.2002 degree of protection IP 40 IP 65 18 x 24 mm Typ-Nr. 200-6008-00 200-6008-W0 b 18 x 18 mm Typ-Nr. 200-4008-00 200-4008-W0 technical drawing for pushbuttons 35 mm e 58 58 0,002 0,002 Swisstac accessories a protective cover for illuminated-/ pushbutton 55 - 70 mm hinged, transparent, not with means for sealing, for use as IP 40: cut off (with knife) the anti-twisting at the front bezel/actuator hinged, transparent, with means for sealing degree of protection IP 40/IP 65 IP 40 b 18 x 24 mm Typ-Nr. 18 x 18 mm Typ-Nr. 200-6008-00 technical drawing protective cover for illuminated-/pushbutton 55 - 70 mm e 58 0,006 58 0,005 18 x 18 mm Typ-Nr. 200-4408-V0 0,006 b 24 x 24 mm Typ-Nr. 200-0008-W0 200-4008-00 technical drawings from page 642 protective cover for flush mounting to us as IP 40: cut off (with knife) the anti-twisting at the front bezel/actuator protective cover for flush mounting 24x24 mm, hinged, transparent, with means for sealing 24x30 mm, hinged, transparent, with means for sealing degree of protection IP 40/IP65 IP 40/IP65 a use for illuminated pushbutton/keylock switch material plastic colour black for illuminated pushbutton/keylock switch plastic black 18 x 24 mm Typ-Nr. b 200-6408-V0 e 0,006 sprayproof cover a material PVC sprayproof cover 24x24 mm, two-part, protection IP 65, illumination exchangeable from the front 24x30 mm, two-part, protection IP 65, illumination exchangeable from the front silicone 18 x 24 mm Typ-Nr. b 18 x 18 mm Typ-Nr. 200-3009-W0 200-5009-W0 e 0,003 0,003 protective guard for illuminated-/pushbutton for mounting depth 55/70 mm a 18 x 24 mm Typ-Nr. protective guard for illuminated-/pushbutton aluminium anodized colourless, 18x20 mm aluminium anodized colourless, 20x24 mm aluminium anodized colourless, 20 mm dia. b 18 x 18 mm Typ-Nr. 200-3007-00 18 mm dia. Typ-Nr. e 0,002 200-5007-00 200-1007-00 0,002 0,002 629 01.2002 Swisstac accessories pressure ring for indicator IP 65, mounting depth 30/45 mm, obligatory e part no. 200-8009-W0 0,001 material silicone part no. 200-9009-W0 0,001 material silicone part no. 200-7009-W0 0,001 18 mm dia. Typ-Nr. 200-1006-00 200-2006-00 200-2006-W0 0,003 0,003 0,003 pressure ring plastic suitable for 24 dia. mm and 24 x 24 mm sealing ring for front bezel IP 65, 24 dia. mm and 24 x 24 mm degree of protection IP 65 sealing ring e sealing bulb for lens IP65, 24 dia. mm and 24 x 24 mm degree of protection IP 65 sealing bulb e blind plug for 35 mm for lenses and pushbuttons 35 mm a blind plug for 35 mm for mounting hole 16.2 mm dia. 630 01.2002 degree of protection IP 40 IP 65 colour grey black black 18 x 24 mm Typ-Nr. 200-5006-00 200-6006-00 200-6006-W0 b 18 x 18 mm Typ-Nr. 200-3006-00 200-4006-00 200-4006-W0 e Swisstac accessories blind plug for lenses and pushbuttons 30/45/55/70 mm blind plug for mounting hole 16.2 mm dia. degree of protection IP 40 IP 65 a colour grey black black 18 x 24 mm Typ-Nr. 200-5006-00 200-6006-00 200-6006-W0 b 18 x 18 mm Typ-Nr. 200-3006-00 200-4006-00 200-4006-W0 18 mm dia. Typ-Nr. 200-1006-00 200-2006-00 200-2006-W0 b 24 x 24 mm Typ-Nr. e 200-0006-W0 0,003 0,003 0,003 use for emergency stop switch foolproof with key to release for keylock switch part no. 240-4001-00 0,005 240-2001-00 0,005 for emergency stop switch with key to release 240-3001-00 0,005 spare key add to the part no., the engraved lock no. spare key for standard lock 1001 for standard lock B2 300, other lock numbers on request for standard lock B2 390, other lock numbers on request e At ordering indicate marked lock no. at back snap-action switching element block for 35 mm snap-action switching element block for 35 mm 1 NC + 1 NO 1 NC + 1 NO + 1 1 NC + 1 NO + 2 2 NC + 2 NO P P P P 56 56 58 58 59 59 57 57 component layout part no. 601-0000-00 601-0000-0P 608-0000-00 608-0000-0P 609-0000-00 609-0000-0P 602-0000-00 602-0000-0P circuit drawing connection method contacts for pushbuttons 35 mm 1 1 1 1 e 0,006 0,006 0,006 0,006 0,006 0,006 0,006 0,006 circuit drawings from page 657, component layouts from page 657 631 01.2002 Swisstac accessories lamp element block for 35 mm lamp element block for 35 mm 0 1 2 P P P 1 1 60 60 61 61 component layout part no. 600-0000-00 600-0000-0P 606-0000-00 606-0000-0P 607-0000-00 607-0000-0P circuit drawing connection method diodes for indicator 35 mm e 1 0,005 0,005 0,006 0,006 0,006 0,006 part no. 202-0600-00 0,002 part no. 270-0000-00 270-0000-0P 0,001 0,001 part no. 260-9000-00 260-8000-00 0,005 0,008 1 1 circuit drawings from page 657, component layouts from page 657 blind element blind element white e lamp terminal lamp terminal use for soldering-/plug-in terminal for PCB terminal e intermediate section intermediate section incl. fixing nut use for illuminated pushbutton 55 mm MG T 1 3/4 for illuminated pushbutton 70 mm T 5.5 e 1 NC + 1 NO colour blue grey green technical drawings from page 642 632 01.2002 P - material of contacts gold plated gold plated gold plated gold plated part no. 201-0500-00 201-0800-00 221-0800-0P 201-0400-00 technical drawing snap-action switching element connection method contacts snap-action switching element e 59 59 59 59 0,003 0,003 0,003 0,003 Swisstac accessories holder for 2 switching elements holder for 2 switching elements use push-pull illuminated switch for pushbutton 35 mm, keylock-/selector switch 45 mm material plastic plastic e part no. 270-2000-00 270-3000-00 0,001 0,001 part no. 270-1000-00 0,001 part no. 260-0010-00 0,001 part no. 280-0200-00 280-0100-00 280-1210-00 280-1110-00 280-1200-00 280-1100-00 280-2200-00 280-2100-00 280-3200-00 280-3100-00 0,006 0,005 0,006 0,005 0,006 0,005 0,006 0,005 0,006 0,005 part no. 280-0000-00 0,002 holder for 3 switching elements holder for 3 switching elements use for illuminated-/pushbuttons 55-70 mm material stainless steel e spring with pin for maintained version at the intermediate section use for illuminated pushbutton 55/70 mm spring with pin e PCB plug-in base PCB plug-in base lamp terminal 0.5 mikron Au incl. lamp terminal 0.5 mikron Au for indicator 35/55/70 mm 1NC + 1NO for 35/45 mm 1NC + 1NO for 55/70 mm 2NC + 2NO for 35/45/55/70 mm 3NC + 3NO for 55/70 mm pin orientation angled straight angled straight angled straight angled straight angled straight e multi-plug housing multi-plug housing for flat connector with locating tongue with 14 terminal possibilities, 10 terminals plugable max. e cable shoe as per VDE 0630 use with insulation socket (280-001000) use for multi-plug housing (280-000000) for insulation sokket (280-0010-00) connection method cable shoe locating tongue with wire cross-section of terminal 0.1 - 0.25 mm& 0.5 - 1.00 mm& - 2.8 x 0.5 mm - 2.8 x 0.5 mm part no. 280-0001-00 280-0002-00 0,001 0,001 without 0.2 - 0.75 mm& - 2.8 x 0.5 mm 280-0003-00 0,001 e 633 01.2002 Swisstac accessories connector with two outputs use for cable shoe (280-0003-00) connection method connector with two outputs - 2.8 x 0.5 mm e part no. 280-0004-00 0,001 part no. 280-0010-00 0,001 insulation socket insulation socket for connector without locating tongue (280-0003-00) e for illumination filament lamp MG T 1 3/4 filament lamp MG T 1 3/4 voltage/current 14 V / 80 mA 28 V / 40 mA 36 V / 30 mA 48 V / 25 mA 6.3 V / 200 mA 60 V / 20 mA e part no. 10-1310.1319 10-1313.1249 10-1316.1209 10-1319.1199 10-1307.1369 10-1320.1179 0,001 0,001 0,001 0,001 0,001 0,001 part no. 10-1106.1369 10-1109.1329 10-1112.1279 10-1116.1229 10-1119.1199 0,001 0,001 0,001 0,001 0,001 colour yellow green red yellow green red yellow green red yellow green red 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 filament lamp T 5.5 filament lamp T 5.5 voltage/current 6 V / 200 mA 12 V / 100 mA 24 V / 50 mA 36 V / 35 mA 48 V / 25 mA e LED MG T 1 3/4 LED MG T 1 3/4 with built-in protective diode Note: For optimal illumination we strongly recommend using our new single-chip LEDs. For new designs, only the new single-chip LEDs should be chosen. They can be found on page 669. 634 01.2002 number of chips 6 voltage/current 6 VDC / 45 mA 12 VDC / 25 mA 24 VDC / 12.5 mA 48 VDC /12.5 mA part no. 10-5306.3254 10-5306.3255 10-5306.3252 10-5309.3204 10-5309.3205 10-5309.3202 10-5312.3134 10-5312.3135 10-5312.3132 10-5319.3104 10-5319.3105 10-5319.3102 e Swisstac accessories LED T 5.5 LED T 5.5 with built-in protective diode number of chips 6 Note: For optimal illumination we strongly recommend using our new single-chip LEDs. voltage/current 6 VDC / 45 mA 12 VDC / 25 mA 24 VDC / 12.5 mA For new designs, only the new single-chip LEDs should be chosen. They can be found on page 669. 48 VDC /12.5 mA colour yellow green red yellow green red yellow green red yellow green red part no. 10-5106.3254 10-5106.3255 10-5106.3252 10-5109.3204 10-5109.3205 10-5109.3202 10-5112.3144 10-5112.3145 10-5112.3142 10-5119.3134 10-5119.3135 10-5119.3132 e 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 diode element diode 1N/4007 1 colour red 2 red connection method diodes diode element e part no. 212-0100-00 222-0100-0P 213-0100-00 214-0100-0P 0,003 0,003 0,003 0,003 part no. 300-0090-00 0,004 part no. 300-0010-00 300-0020-00 300-0030-00 300-0040-00 300-0050-00 0,003 0,003 0,003 0,003 0,003 no. of spaces 10 spaces part no. 300-0110-00 0,045 15 spaces 20 spaces 5 spaces 300-0115-00 300-0120-00 300-0105-00 0,090 0,095 0,025 P P capacitor for lamp voltage reduction capacitor use with 60 V/20 mA, 50 Hz lamp voltage value 220 V/0.27 F e Please keep to the country specific security rules. series resistor for lamp voltage reduction series resistor use with 60 V / 20 mA lamp rating value 100 V / 2.7 k 125 V / 3.3 k 145 V / 4.7 k 230 V / 8.2 k 240 V / 10 k e Please keep to the country specific security rules. terminal plate empty for fitting with series resistors and capacitors terminal plate empty 125 x 60 x 15 mm 187.5 x 60 x 15 mm 250 x 60 x 15 mm 62.5 x 60 x 15 mm e 635 01.2002 Swisstac accessories for emergency stop switch label for emergency stop switch label for emergency stop switch yellow, other constructions on request degree of protection IP 40 marking in German in English in French without in German in English in French without IP 65 43 mm dia. Typ-Nr. 200-1300-02 200-1300-03 200-1300-04 200-1300-01 200-1300-W2 200-1300-W3 200-1300-W4 200-1300-W1 e 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 1 NC colour grey P material of contacts gold plated gold plated technical drawing slow-make switching element for emergency stop switch connection method contacts slow-make switching element for emergency stop switch e 60 60 0,003 0,003 part no. 300-0017-00 0,004 part no. 260-0001-00 260-0002-00 260-0005-00 260-0003-00 0,001 0,001 0,001 0,001 part no. 211+0800-00 231+0800-0P technical drawings from page 642 dismantling tool for emergency stop switch foolproof dismantling tool for emergency stop switch foolproof e assembling fixing nut for standard mounting use for mounting depth 30-70 mm fixing nut plastic for mounting depth 35 mm 636 01.2002 panel thickness 1-3 mm 3-5 mm 5-7 mm 1-3 mm colour grey grey grey black e Swisstac accessories fixing nut for flush mounting fixing nut for flush mounting plastic use for mounting depth 41/44 mm for mounting depth 39-79 mm panel thickness 1-3 mm 3-5 mm colour black grey part no. 260-0003-00 260-0002-00 e 0,001 0,001 location strip for indicators, illuminated/push buttons, push-pull illuminated button, buzzer, mushroom-head cap, key and selector switches and emergency button 55-70 mm IP 40 / IP 65 designs location strip anti-twisting, in-line arrays or single switches use graduation 18 mm graduation 24 mm e part no. 260-0020-00 260-0021-00 0,001 0,001 part no. 300-0001-00 0,012 part no. 300-0002-00 0,003 part no. 300-0003-00 0,007 part no. 300-0005-00 0,013 part no. 300-0004-00 0,003 part no. 300-0006-00 0,001 lens remover lens remover e lamp/LED remover lamp/LED remover e Warning: when replacing lamps/LED a switching process can be triggered! mounting tool mounting tool for tightening (or loosening) fixing nuts (at dismantled element block) e contact element pliers for block mounting contact element pliers for dismantling the switching elements off the holder for 3 switching elements e jaw spanner jaw spanner for tightening (or loosening) fixing nuts and dismantling of the element blocks (mounting depth 35-70 mm) e cable shoe remover cable shoe remover for removing the connector from the multi-plug housing (280-0000-00 e 637 01.2002 Swisstac technical data Switching system Self-cleaning, double-break slow-make element with four-path contacts (contact opening width 2 x 1.5 mm). The slow-make elements are constructed as per DIN EN 60947-5-1. Protection class Front side IP 65 Switching element IP 40 Materials Ambient temperature -25C as per DIN EN 60068-2-1 +55C as per DIN EN 60068-2-2 Mushroom-head cap Polyamide PA Storage temperature -40C to +85C Actuator housing Polyetherimide PEI, self-extinguishing Mechanical service life EMERGENCY button 50,000 operations Switching element Polyamide PA Polysulfone PSU Electrical characteristic values Contact material Silver Connections Solder/plug-in terminal max. wire diameter: 2 wires of 1 mm max. wire cross-section: 1 strand at 0.75 mm Connection 2.8 x 0.5 mm Mechanical characteristic values Actuating travel EMERGENCY button 10 mm Actuating force max. 65 N (measured on mushroom-head cap of emergency button) Self-aligning torque 15 Ncm Switch rating Silver contact (Solder/plug-inmin. 20 VAC, 10 mA connection)max. 250 VAC, 5 A Service category Rated serviceRated service voltagecurrent (inductive) AC 13 AC 14 250 VAC 3A 2A 120 VAC 5A 3A 60 VAC 6A 4A 24 VAC 6A 5A Service category Rated serviceRated service voltagecurrent resistive 240 VDC 0.5 A 110 VDC 0.7 A 60 VDC 2.0 A 24 VDC 6.0 A DC 13 0.2 A 0.4 A 1.0 A 2.0 A Shock resistance (single impact, half-sinusoidal) 50 g, 11 ms as per IEC 512-4 Volume resistivity New value for: Silver contact <= 50 m as per IEC 512-2 Test 5 Resistance to vibration (sinusoidal) 10 g, at 10- 2000- 10- Hz Amplitude 0.75 mm as per IEC 512-4 Rated insulation voltage Ui 300 VAC Rebound time <= 2 ms Electric strength as per VDE 0660 (IEC 512-2-11) 4000 VAC, 50 Hz, 1 min between connections and earth Degree of pollution 3 Overvoltage category III 638 01.2002 Swisstac technical data Thermal steady current Ith2 solder/plug-in connection 5 A > 2 x 1.5 mm EMERGENCY switching element Max. permissible current for continuous operation and ambient temperature which does not exceed the specified max. values Electrical characteristic values Max. permissible rated current for series-connected blow-out fuse 10 A gL Electrical service life Slow-make element 6050 operations Rated voltage 250 V / 50 Hz Service category AC 15: 250 V / 1 A Rated insulation voltage Ui 250 V Approvals - CE (declaration of conformity) - CSA - UR - VDE - ENEC Right reserved to change all technical specifications. Series-connected blow-out fuse 5 A gL Conventional thermal current Ith 5A Electrical service life 8000 switching cycles AC 15: 250 V / 1 A EMERGENCY slow-make element Diode element General General Is equipped with rigid contact link. The slow-make element opens positively and simply consists of a double-break NC. The multilayer contacts are designed for universal use and are gilded with a 2 m gold coating. The EMERGENCY slow-make element is designed according to DIN EN 609475-1. Material Housing Duroplast (DAP) with fireproofing as per UL 94 V0 Contact AgNi, 2 m gilded Contact carrier Brass or CuBe Connection Brass gilded 2.8 x 0.5 mm solder/plug-in or PCB connection 1 mm max. connection cross-section Mechanical characteristic values Ambient temperature -25C as per DIN EN 60068-2-1 +55C as per DIN EN 60068-2-2 Storage temperature -40C to +85C Mechanical service life 8000 switching cycles Contact opening width Has no switching function. The diodes are soldered into the switching element housing between the contact connections. Material Housing Thermoplast (PETP) with fireproofing as per UL 94 V0 Connection Brass gilded 2.8 x 0.5 mm solder/plug-in or PCB connection 1 mm max. connection cross-section Electrical characteristic values Diode 1 N / 4007, Imax. = 1 A, Ublock = 1000 V Dummy element General Is inserted in empty places in the switching element block. The dummy element has no metal parts and no electrical function. Material Housing Thermoplast (PET) with fireproofing as per UL 94 V0 Alarm buzzer Operating voltage 639 01.2002 Swisstac technical data Current consumption approx. 13 mA Reverse-connect protection yes Acoustics approx. 84 dB at 0.1 m Frequency approx. 2.3 kHz Material Lens Thermoplast (PC) Front bezel Thermoplast with fireproofing (PBT) Actuator 35 mm Thermoplast with fireproofing (PBT) Lock housing Thermoplast with fireproofing (PBT) Unit General In accordance with the low-voltage directive, our products are labelled with the CE mark. SWISSTAC switches are modularly designed and are divided into the following three groups: 1. Front Man-switch interface and state detector 2. Intermediate piece Set and reset device, bulb holder, latching function 3. Switching element block Up to five switching elements can be integrated in a switching element block. Each switch is tested fully mounted. Electrical output and service life are determined by the switching element. Front and intermediate piece are designed for maximum service life of the switching element. They determine in what way the switches are protected against external influences. The type approvals relate to the complete switches. The approval regulations are UL 1054, VDE 0630 (EMERGENCY button VDE 0660), CSA 22.2. Mechanical characteristic values Resistance to vibration tested as per DIN EN 60068-2-6 (10 g to 2000 Hz) Shock resistance tested as per DIN EN 60068-2-27 (semi-sinusoidal, 50 g during 11 ms) (single impacts, semi-sinusoidal) 15 g during 11 ms as per DIN EN 60068-2-29 Approvals - CE (declaration of conformity) - CSA - UR - VDE - ENEC Lock cylinder Rynite reinforced with carbon fibre (PBT + CF) Seal bellows (IP 65) Silicon Mechanical characteristic values Protection class as per IEC 529 (front side) IP 40 IP 65 IP 67 protection against water 0 = without protection 5 = spray water 7 = watertight up to 1 m WS protection against solid matter of varying size 4 = protection against solid matter > y 1 mm 6 = dust-tight see "Intermediate piece" for other properties Intermediate piece General The intermediate piece serves for several properties such as the setting and resetting functions, and the latching device. In addition, all parts necessary for a complete switch are fastened to the intermediate piece. These include the front parts, switching element block and lamps. Material Housing Thermoplast with fireproofing (PC) Lamp connection Nickel silver 2.8 x 0.5 mm Electrical characteristic values Front Electric strength 3750 V AC, 1 min. as per DIN EN 61058-1 General Insulation resistance The front notifies the switching status, serves for activation of the switch and determines its type of protection. The form and colours of the front also characterise the appearance of the entire switching system. With the exception of the front y 18 mm of the illuminated pushbuttons 55 and 70 mm, all front frame elements have activation protection. 640 01.2002 > 1012 as per IEC 512-2-10 Illumination Lamp voltage 6 V to 125 V as per CSA 6 V to 60 V as per VDE, UL, DEMKO Swisstac technical data Lamp output max. 1.2 W Contact AgNi, 2 m gilded Mechanical characteristic values Ambient temperature -25C as per DIN EN 60068-2-1 +55C as per DIN EN 60068-2-2 Contact carrier Brass or CuBe Storage temperature -40C to +85C Connection Brass gilded 2.8 x 0.5 mm solder/plug-in or PCB connection 1 mm max. connection cross-section Service life Mechanical characteristic values > 2 x 106 activations of the illuminated pushbuttons > 5 x 104 activations of the key and selector switches 3 > 8 x 10 activations of the emergency button > 2.5 x 105 activations of the push-pull illuminated button Switching element block General Up to five independent switching elements can be integrated in the switching element block as a switching unit. There are four different types of switching element available. 1. Snap-action switching element 2. Emergency button switching element 3. Diode element 4. Dummy element Ambient temperature -25C to +55C -25C as per DIN EN 60068-2-1 +55C as per DIN EN 60068-2-2 Storage temperature -40C to +85C as per DIN EN 60068 Mechanical service life 2 x 105 switching cycles Contact opening width 2 x 0.65 mm Contact cleaning path 2 x 0.6 mm Material Rebound time typically 0.5 ms Bracket for three switching elements rust-free chromium steel Activation force approx. 2 N for each snap-action switching element Bracket for two switching elements Thermoplast with fireproofing (PA6) Electrical characteristic values Lamp connection CuBe, 2 m Optalloy 2.8 x 0.5 mm solder/plug-in connection Thermal steady current Ith. max. 6 A, up to 3-pole switching element block 4 A, for 4- and 5-pole switching element blocks Limited on thermal grounds to Imax. = 4 A Electrical characteristic values Electric strength 2000 V AC, 50 Hz 1 min. (functional isolation) Insulation resistance > 1012 W In accordance with the VDE 0630 regulation, blade receptacles must be used with the insulation socket 280-0010-00. Snap-action switching element General Is equipped with double-break jump contacts. Owing to the large cleaning path, outstanding self-cleaning is possible. The multilayer contacts are designed for universal use. They are gilded with a 2 m gold coating. Each snap-action switching element comprises an NC (normally closed contact) and an NO (normally open contact) Material Housing Thermoplast (PETP) with fireproofing as per UL 94 V0 Volume resistivity < = 50 m typically, new statically Electrical load as per DIN EN 61058-1 5(1.5) A 250 V up to 3 switching elements 4(1) A 250 V for 4 or 5 switching elements, min. AC / DC: 5 V / 1 mA Electrical service life > 104 switching operations DIN EN 61058-1250 V, (1.5) A DIN EN 60947-5-1 AC 12:250 V / 0.5 A 110 V / 2 A 75 V / 5 A 60 V / 6 A 48 V / 6 A 24 V / 6 A Snap-action switching element Out 4.7 In 3.6 641 01.2002 drawings technical drawings 1 indicator actuator 35 mm, pushbutton-/illuminated pushbutton actuator 35 mm page 591, 592 2 indicator 30 - 70 mm, buzzer 30 - 55 mm page 591, 607 3 indicator 30 - 70 mm page 591 4 indicator 30 - 70 mm, buzzer 30 - 55 mm page 591, 607 5 indicator 30 - 70 mm, buzzer 30 - 55 mm page 591, 607 6 indicator 30 - 70 mm page 591 642 01.2002 Swisstac drawings Swisstac 7 indicator 30 - 70 mm page 591 8 illuminated-/pushbutton 55 - 70 mm page 593 9 illuminated-/pushbutton 55 - 70 mm page 593 10 illuminated-/pushbutton 55 - 70 mm page 593 11 illuminated-/pushbutton 55 - 70 mm page 593 12 emergency stop switch 55 - 70 mm page 594 643 01.2002 drawings 13 emergency stop switch 55 - 70 mm page 594 14 emergency stop switch 55 - 70 mm page 594 15 emergency stop switch 55 - 70 mm page 594 16 emergency stop switch foolproof 41 mm page 596 17 pushbutton with mushroom-head cap 55 - 70 mm page 597 644 01.2002 Swisstac drawings Swisstac 18 pushbutton with mushroom-head cap 55 - 70 mm page 597 19 pushbutton with mushroom-head cap 55 - 70 mm page 597 20 pushbutton with mushroom-head cap 55 - 70 mm page 597 21 keylock switch 2 positions 45 - 70 mm, keylock switch 3 positions 45 mm page 598, 602 22 keylock switch 2 positions 45 - 70 mm, keylock switch 3 positions 45 mm page 598, 602 23 keylock switch 2 positions 45 - 70 mm page 598 645 01.2002 drawings 24 keylock switch 2 positions 45 - 70 mm page 598 25 keylock switch 2 positions 45 - 70 mm page 598 26 keylock switch 2 positions 45 - 70 mm page 598 27 selector switch 2 positions 45 - 70 mm, selector switch 3 positions 45 mm page 603, 606 28 selector switch 2 positions 45 - 70 mm, selector switch 3 positions 45 mm page 603, 606 29 selector switch 2 positions 45 - 70 mm page 603 646 01.2002 Swisstac drawings Swisstac 30 selector switch 2 positions 45 - 70 mm page 603 31 selector switch 2 positions 45 - 70 mm page 603 32 selector switch 2 positions 45 - 70 mm page 603 33 push-pull illuminated switch 45 mm page 607 34 push-pull illuminated switch 45 mm page 607 35 indicator actuator 41-44 mm for flush mounting, illuminated-/pushbutton actuator 41-44 mm for flush mounting page 608, 610 647 01.2002 drawings 36 indicator for flush mounting 39 - 79 mm, buzzer for flush mounting 39 - 64 mm page 609, 621 37 indicator for flush mounting 39 - 79 mm page 609 38 indicator for flush mounting 39 - 79 mm, buzzer for flush mounting 39 - 64 mm page 609, 621 39 indicator for flush mounting 39 - 79 mm, buzzer for flush mounting 39 - 64 mm page 609, 621 40 indicator for flush mounting 39 - 79 mm page 609 41 indicator for flush mounting 39 - 79 mm page 609 648 01.2002 Swisstac drawings Swisstac 42 pushbutton-/illuminated pushbutton for flush mounting 61 - 79 mm page 611 43 pushbutton-/illuminated pushbutton for flush mounting 61 - 79 mm page 611 44 pushbutton-/illuminated pushbutton for flush mounting 61 - 79 mm page 611 45 pushbutton-/illuminated pushbutton for flush mounting 61 - 79 mm page 611 46 keylock switch 2 positions for flush mounting 51 - 79 mm, keylock switch with 3 positions for flush mounting 51 - 54 mm page 612, 616 47 keylock switch 2 positions for flush mounting 51 - 79 mm, keylock switch with 3 positions for flush mounting 51 - 54 mm page 612, 616 649 01.2002 drawings Swisstac 48 keylock switch 2 positions for flush mounting 51 - 79 mm page 612 49 keylock switch 2 positions for flush mounting 51 - 79 mm page 612 50 keylock switch 2 positions for flush mounting 51 - 79 mm page 612 51 keylock switch 2 positions for flush mounting 51 - 79 mm page 612 52 selector switch 2 positions for flush mounting 51 - 79 mm, selector switch 3 positions for flush mounting 51 - 54 mm page 617, 620 53 selector switch 2 positions for flush mounting 51 - 79 mm, selector switch 3 positions for flush mounting 51 - 54 mm page 617, 620 650 01.2002 drawings Swisstac 54 selector switch 2 positions for flush mounting 51 - 79 mm page 617 55 selector switch 2 positions for flush mounting 51 - 79 mm page 617 56 selector switch 2 positions for flush mounting 51 - 79 mm page 617 57 selector switch 2 positions for flush mounting 51 - 79 mm page 617 58 protective cover for 35 mm, protective cover for illuminated-/pushbutton 55 - 70 mm page 628, 629 651 01.2002 drawings 59 snap-action switching element page 632 60 slow-make switching element for emergency stop switch page 636 mounting dimensions 1 indicator actuator 35 mm, pushbutton-/illuminated pushbutton actuator 35 mm page 591, 592 2 indicator actuator 35 mm, pushbutton-/illuminated pushbutton actuator 35 mm page 591, 592 652 01.2002 Swisstac drawings Swisstac 3 indicator 30 - 70 mm, illuminated-/pushbutton 55 - 70 mm page 591, 593, 4 emergency stop switch 55 - 70 mm page 594 5 emergency stop switch 55 - 70 mm page 594 6 emergency stop switch foolproof 41 mm page 596 653 01.2002 drawings 7 pushbutton with mushroom-head cap 55 - 70 mm page 597 8 keylock switch 2 positions 45 - 70 mm, keylock switch 3 positions 45 mm 598, 602, 9 keylock switch 2 positions 45 - 70 mm, keylock switch 3 positions 45 mm page 598, 602 10 selector switch 2 positions 45 - 70 mm, selector switch 3 positions 45 mm page 603, 606 11 selector switch 2 positions 45 - 70 mm, selector switch 3 positions 45 mm page 603, 606 654 01.2002 Swisstac drawings Swisstac 12 buzzer 30 - 55 mm page 607 13 push-pull illuminated switch 45 mm page 607 14 indicator actuator 41-44 mm for flush mounting, indicator for flush mounting 39 - 79 mm, illuminated-/pushbutton actuator 41-44 mm for flush mounting, pushbutton-/illuminated pushbutton for flush mounting 61 - 79 mm, keylock switch 2 positions for flush mounting 51 - 79 mm, keylock switch with 3 positions for flush mounting 51 - 54 mm page 608, 609, 610, 611, 612, 616 655 01.2002 drawings Swisstac 15 selector switch 2 positions for flush mounting 51 - 79 mm, selector switch 3 positions for flush mounting 51 - 54 mm page 617, 620 16 buzzer for flush mounting 39 - 64 mm page 621 656 01.2002 drawings Swisstac component layouts 1 indicator actuator 35 mm, indicator 30 - 70 mm, pushbutton-/illuminated pushbutton actuator 35 mm, illuminated-/pushbutton 55 - 70 mm, emergency stop switch 55 - 70 mm, pushbutton with mushroom-head cap 55 - 70 mm, keylock switch 2 positions 45 - 70 mm, keylock switch 3 positions 45 mm, selector switch 2 positions 45 - 70 mm, selector switch 3 positions 45 mm, buzzer 30 - 55 mm, push-pull illuminated switch 45 mm, indicator for flush mounting 39 - 79 mm, pushbutton-/illuminated pushbutton for flush mounting 61 - 79 mm, keylock switch 2 positions for flush mounting 51 - 79 mm, keylock switch with 3 positions for flush mounting 51 - 54 mm, selector switch 2 positions for flush mounting 51 - 79 mm, selector switch 3 positions for flush mounting 51 - 54 mm, buzzer for flush mounting 39 - 64 mm, snap-action switching element block for 35 mm, lamp element block for 35 mm page 591, 591, 592, 593, 594, 597, 598, 602, 603, 606, 607, 607, 609, 611, 612, 616, 617, 620, 621, 631, 632 circuit drawings 1 indicator actuator 35 mm, indicator 30 - 70 mm, indicator actuator 41-44 mm for flush mounting, indicator for flush mounting 39 - 79 mm, lamp element block for 35 mm page 591, 591, 608, 609, 632 2 pushbutton-/illuminated pushbutton actuator 35 mm page 592 3 pushbutton-/illuminated pushbutton actuator 35 mm page 59 657 01.2002 drawings 4 illuminated-/pushbutton 55 - 70 mm, pushbutton-/illuminated pushbutton for flush mounting 61 - 79 mm 593, 611, 5 illuminated-/pushbutton 55 - 70 mm, pushbutton-/illuminated pushbutton for flush mounting 61 - 79 mm page 593, 611 6 illuminated-/pushbutton 55 - 70 mm, pushbutton-/illuminated pushbutton for flush mounting 61 - 79 mm page 593, 611 7 illuminated-/pushbutton 55 - 70 mm, pushbutton-/illuminated pushbutton for flush mounting 61 - 79 mm page 593, 611 8 illuminated-/pushbutton 55 - 70 mm, pushbutton-/illuminated pushbutton for flush mounting 61 - 79 mm page 593, 611 9 emergency stop switch 55 - 70 mm page 594 10 emergency stop switch 55 - 70 mm page 594 658 01.2002 Swisstac drawings Swisstac 11 emergency stop switch 55 - 70 mm page 594 12 emergency stop switch foolproof 41 mm page 596 13 emergency stop switch foolproof 41 mm page 596 14 emergency stop switch foolproof 41 mm page 596 15 pushbutton with mushroom-head cap 55 - 70 mm page 597 16 pushbutton with mushroom-head cap 55 - 70 mm page 597 17 pushbutton with mushroom-head cap 55 - 70 mm page 597 659 01.2002 drawings 18 pushbutton with mushroom-head cap 55 - 70 mm page 597 19 pushbutton with mushroom-head cap 55 - 70 mm page 597 20 keylock switch 2 positions 45 - 70 mm, keylock switch 2 positions for flush mounting 51 - 79 mm page 598, 612 21 keylock switch 2 positions 45 - 70 mm, keylock switch 2 positions for flush mounting 51 - 79 mm page 598, 612 22 keylock switch 2 positions 45 - 70 mm, keylock switch 2 positions for flush mounting 51 - 79 mm page 598, 612 23 keylock switch 2 positions 45 - 70 mm, keylock switch 2 positions for flush mounting 51 - 79 mm page 598, 612 24 keylock switch 2 positions 45 - 70 mm, keylock switch 2 positions for flush mounting 51 - 79 mm page 598, 612 660 01.2002 Swisstac drawings Swisstac 25 keylock switch 2 positions 45 - 70 mm, keylock switch 2 positions for flush mounting 51 - 79 mm page 598, 612 26 keylock switch 2 positions 45 - 70 mm, keylock switch 2 positions for flush mounting 51 - 79 mm page 598, 612 27 keylock switch 2 positions 45 - 70 mm, keylock switch 2 positions for flush mounting 51 - 79 mm page 598, 612 28 keylock switch 2 positions 45 - 70 mm, keylock switch 2 positions for flush mounting 51 - 79 mm page 598, 612 29 keylock switch 2 positions 45 - 70 mm, keylock switch 2 positions for flush mounting 51 - 79 mm page 598, 612 30 keylock switch 2 positions 45 - 70 mm, keylock switch 2 positions for flush mounting 51 - 79 mm page 598, 612 31 keylock switch 2 positions 45 - 70 mm, keylock switch 2 positions for flush mounting 51 - 79 mm page 598, 612 661 01.2002 drawings 32 keylock switch 3 positions 45 mm, keylock switch with 3 positions for flush mounting 51 - 54 mm page 602, 616 33 keylock switch 3 positions 45 mm, keylock switch with 3 positions for flush mounting 51 - 54 mm page 602, 616 34 keylock switch 3 positions 45 mm, keylock switch with 3 positions for flush mounting 51 - 54 mm page 602, 616 35 keylock switch 3 positions 45 mm, keylock switch with 3 positions for flush mounting 51 - 54 mm page 602, 616 36 selector switch 2 positions 45 - 70 mm, selector switch 2 positions for flush mounting 51 - 79 mm page 603, 617 37 selector switch 2 positions 45 - 70 mm, selector switch 2 positions for flush mounting 51 - 79 mm page 603, 617 38 selector switch 2 positions 45 - 70 mm, selector switch 2 positions for flush mounting 51 - 79 mm page 603, 617 662 01.2002 Swisstac drawings Swisstac 39 selector switch 2 positions 45 - 70 mm, selector switch 2 positions for flush mounting 51 - 79 mm page 603, 617 40 selector switch 2 positions 45 - 70 mm, selector switch 2 positions for flush mounting 51 - 79 mm page 603, 617 41 selector switch 2 positions 45 - 70 mm, selector switch 2 positions for flush mounting 51 - 79 mm page 603, 617 42 selector switch 2 positions 45 - 70 mm, selector switch 2 positions for flush mounting 51 - 79 mm page 603, 617 43 selector switch 2 positions 45 - 70 mm, selector switch 2 positions for flush mounting 51 - 79 mm page 603, 617 44 selector switch 2 positions 45 - 70 mm, selector switch 2 positions for flush mounting 51 - 79 mm page 603, 617 45 selector switch 2 positions 45 - 70 mm, selector switch 2 positions for flush mounting 51 - 79 mm page 603, 617 663 01.2002 drawings 46 selector switch 2 positions 45 - 70 mm, selector switch 2 positions for flush mounting 51 - 79 mm page 603, 617 47 selector switch 2 positions 45 - 70 mm, selector switch 2 positions for flush mounting 51 - 79 mm page 603, 617 48 selector switch 3 positions 45 mm, selector switch 3 positions for flush mounting 51 - 54 mm page 606, 620 49 selector switch 3 positions 45 mm, selector switch 3 positions for flush mounting 51 - 54 mm page 606, 620 50 selector switch 3 positions 45 mm, selector switch 3 positions for flush mounting 51 - 54 mm page 606, 620 51 selector switch 3 positions 45 mm, selector switch 3 positions for flush mounting 51 - 54 mm page 606, 620 52 buzzer 30 - 55 mm, buzzer for flush mounting 39 - 64 mm page 607, 621 664 01.2002 Swisstac drawings Swisstac 53 push-pull illuminated switch 45 mm page 607 54 illuminated-/pushbutton actuator 41-44 mm for flush mounting page 610 55 illuminated-/pushbutton actuator 41-44 mm for flush mounting page 610 56 snap-action switching element block for 35 mm page 631 57 snap-action switching element block for 35 mm page 631 58 snap-action switching element block for 35 mm page 631 59 snap-action switching element block for 35 mm page 631 665 01.2002 drawings 60 lamp element block for 35 mm page 632 61 lamp element block for 35 mm page 632 666 01.2002 Swisstac Swisstac Marking 1. Engraving 2. Hot stamping 3. Film insert The lens top or the lens holder can be engraved in any of the usual languages. Typefaces: compressed typeface to DIN 1451. Other faces on request. For lettering any sizeable quantity we recommend pad printing on the lens holder. Instead of engraving, a transpartent foil can be laid in the lens tops, exept with the colours grey and black. Important! With pad printing, the position of the lens must agree with the position of the pushbutton or indicator. However, the lens can be mounted turned through 180. Foil thickness 0.1 mm max O 18 mm 18 x 18 mm 18 x 24 mm O 24 mm 24 x 24 mm O 12,7 mm 12,7 x 12,7 mm 12,7 x 18,9 mm O 18,3 mm 18,3 x 18,3 mm Colour of lettering White for lens tops red, blue, green and black Black for lens tops orange, yellow, grey and white Black for lens holders translucent and transparent Filmdickemax. 0,1mm Important! With engraving, the position of the lens must agree with the position of the pushbutton or indicator. However, the lens can be mounted turned through 180. Important! When a foil is used, the position of the lens must agree with the position of the pushbutton or indicator. However, the lens can be mounted turned through 180. 18 x 18 18 x 24 24 x 18 'round' 24 18,5 mm 13 mm h ABC h h ABC h ABC h - Number of letters per line Number of lines - Number of letters per line Number of lines - Number of letters per line Number of lines - Number of letters per line Number of lines - Number of letters per line Number of lines - Number of letters per line vertical montage Number of lines horizontal montage ABC 18,5 mm ABC 13 mm h 13 mm ABC 18,5 mm 18,5 mm 13 mm 13 mm 24 x 24 2,5 mm 2 5 3 5 3 8 5 5 4 7 5 8 3 mm 2 5 3 5 3 8 4 5 3 7 4 8 4 mm 1 3 2 3 2 5 3 3 3 4 3 6 5 mm 1 2 1 3 1 5 2 3 2 3 2 5 Height of letters h 667 01.2000 18,5 mm 'round' 18