VSMY7852X01 www.vishay.com Vishay Semiconductors High Power Infrared Emitting Diode, 850 nm, Surface Emitter Technology FEATURES * Package type: surface-mount * Package form: Little Star(R) * Dimensions (L x W x H in mm): 6.0 x 7.0 x 1.5 * Peak wavelength: p = 850 nm 20783 * High reliability * High radiant power DESCRIPTION As part of the SurfLightTM portfolio, the VSMY7852X01 is an infrared, 850 nm emitting diode based on surface emitter technology with high radiant power and high speed, molded in low thermal resistance Little Star package. A 20 mil chip provides outstanding low forward voltage and allows DC operation of the device up to 250 mA. * High radiant intensity * Angle of half intensity: = 60 * Low forward voltage * Designed for high drive currents: up to 250 mA DC and up to 1.5 A pulses * Low thermal resistance: RthJP = 15 K/W * Floor life: 1 year, MSL 2, according to J-STD-020 APPLICATIONS * Lead (Pb)-free reflow soldering * Infrared illumination for CMOS cameras (CCTV) * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 * Machine vision IR data transmission PRODUCT SUMMARY COMPONENT Ie (mW/sr) (deg) p (nm) tr (ns) VSMY7852X01 55 60 850 8 Note * Test conditions see table "Basic Characteristics" ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM VSMY7852X01-GS08 Tape and reel MOQ: 2000 pcs, 2000 pcs/reel Little Star Note * MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER SYMBOL VALUE Reverse voltage TEST CONDITION VR 5 UNIT V Forward current IF 250 mA Peak forward current tp/T = 0.5, tp = 100 s IFM 500 mA Surge forward current tp = 100 s IFSM 1.5 A Power dissipation PV 500 mW Junction temperature Tj 125 C Operating temperature range Tamb -40 to +100 C Storage temperature range Tstg -40 to +100 C According to Fig. 7, J-STD-20 Tsd 260 C According to J-STD-051, soldered on PCB RthJP 15 K/W Soldering temperature Thermal resistance junction-to-pin Rev. 1.7, 06-Apr-17 Document Number: 81146 1 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY7852X01 Vishay Semiconductors 600 300 500 250 IF - Forward Current (mA) PV - Power Dissipation (mW) www.vishay.com 400 300 200 RthJP = 15 K/W 100 200 150 100 RthJP = 15 K/W 50 0 0 0 21779 20 40 60 80 100 120 0 Tamb - Ambient Temperature (C) 20 Fig. 1 - Power Dissipation Limit vs. Ambient Temperature 40 60 80 100 120 Tamb - Ambient Temperature (C) 21780 Fig. 2 - Forward Current Limit vs. Ambient Temperature BASIC CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 250 mA, tp = 10 ms VF - 1.7 2.0 V Temperature coefficient of VF IF = 1 mA TKVF - -1.5 - mV/K Reverse current VR = 5 V IR Radiant intensity IF = 250 mA, tp = 10 ms Ie 30 Radiant power IF = 250 mA, tp = 20 ms e - 130 - mW IF = 1 A TKe - -0.5 - %/K - 60 - deg Peak wavelength IF = 250 mA p - 850 - nm Spectral bandwidth IF = 250 mA - 30 - nm Forward voltage Temperature coefficient of e Angle of half intensity Not designed for reverse operation 55 90 A mW/sr Temperature coefficient of p IF = 250 mA TKp - 0.2 - nm/K Rise time IF = 250 mA tr - 8 - ns Fall time IF = 250 mA tf - 10 - ns Rev. 1.7, 06-Apr-17 Document Number: 81146 2 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY7852X01 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 10 e, rel - Relative Radiant Power 1 1 0.1 0.01 0.001 0 0.5 1 1.5 2 2.5 0.5 0.25 0 650 3 VF - Forward Voltage (V) 21781 0.75 750 Fig. 3 - Forward Current vs. Forward Voltage 0 10 20 30 tp = 100 s Ie, rel - Relative Radiant Intensity Ie - Radiant Intensity (mW/sr) 950 Fig. 5 - Relative Radiant Power vs. Wavelength 1000 100 10 1 0.1 0.001 0.01 0.1 1 40 1.0 0.9 50 0.8 60 Fig. 4 - Radiant Intensity vs. Forward Current 70 0.7 10 IF - Forward Current (A) Rev. 1.7, 06-Apr-17 850 - Wavelength (nm) 21776 - Angular Displacement IF - Forward Current (A) tp = 100 s 80 0.6 0.4 0.2 0 948013-1 Fig. 6 - Relative Radiant Intensity vs. Angular Displacement Document Number: 81146 3 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY7852X01 www.vishay.com Vishay Semiconductors TAPING DIMENSIONS in millimeters 20846 Rev. 1.7, 06-Apr-17 Document Number: 81146 4 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY7852X01 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 6 0.7 0.5 5.2 0.7 3 O 3.3 1.6 0.6 2.6 7 6 2.6 0.1 0.3 Anode marking Recommended solder pad Recommended area for heat sink connected with anode pad technical drawings according to DIN specifications 8.2 6.2 Not indicated tolerances 0.1 8.65 3 17.5 1.2 2 solder pad cathode solder pad anode contour of device Drawing-No.: 6.541-5076.01-4 Issue: 3; 22.10.14 Rev. 1.7, 06-Apr-17 19 Document Number: 81146 5 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY7852X01 www.vishay.com Vishay Semiconductors SOLDER PROFILE DRYPACK 300 Temperature (C) max. 260 C 245 C 255 C 240 C 217 C 250 200 Floor life (time between soldering and removing from MBB) must not exceed the time indicated on MBB label: max. 100 s Floor life: 1 year 100 max. ramp down 6 C/s 50 0 19841 50 100 150 200 250 300 Time (s) Fig. 7 - Lead (Pb)-free Reflow Solder Profile According to J-STD-020 for Preconditioning According to JEDEC(R), Level 2 Rev. 1.7, 06-Apr-17 Conditions: Tamb < 30 C, RH < 60 % Moisture sensitivity level 2, according to J-STD-020B max. ramp up 3 C/s 0 FLOOR LIFE max. 30 s 150 max. 120 s Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. DRYING In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or label. Devices taped on reel dry using recommended conditions 192 h at 40 C (+ 5 C), RH < 5 %. Document Number: 81146 6 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000