SPE-13-8-063/C/PK | page 1 of 6
TI.10.0111.HT
Specification
Part No. TI.10.0111.HT
Product Name 433MHz ISM Band Terminal Antenna
Omni-Directional 0dBi
HIGH TEMPERATURE
Feature SMA(M) Plug Connector
Dupont® Hytrel® High Temperature Resistant TPEE
Housing (up to 150°C)
Low Profile and Robust Handling
48.2mm Antenna Dimensions
IP65
RoHS Compliant
Close-up
SPE-13-8-063/C/PK | page 2 of 6
The TI.10 HT series are robust miniature
433MHz omni-directional antennas suitable
for high temperature applications.
The TI.10 terminal SMA plug mount
antenna is ideal for mobile small form
factor applications.
At only 48.2mm in length an
omni-directional pattern with a peak
gain 0dBi ensures constant reception
and transmission. The antenna housing
is made of Dupont® Hytrel® TPEE
material which is durable in high
temperature application environments
up to 150°C. This material is proven in
the automotive industry applications,
thus allowing the antenna to be
placed nearer the engine or heat
generating components.
1. Introduction
2. Key Antenna Performance Indicators
Parameter Specification
Applications 433MHz ISM Band
Frequency 433.05~434.79MHz
Peak Gain 0dBi
Return Loss -17dB
Impedance 50 Ohms
Radiation Pattern Omni-Directional
Polarization Linear
VSWR ≤1.5:1
Power handling 5 W
Housing Dupont® Hytrel® TPEE
Connector SMA(M) plug
Operation Temperature -40°C to + 150°C
Storage Temperature -40°C to + 105°C
Relative Humidity 40% to 95%
Dimensions Length: 48.2mm
Weight 8.5g
SPE-13-8-063/C/PK | page 3 of 6
3. Antenna Parameters
3.1 VSWR Data
SPE-13-8-063/C/PK | page 4 of 6
3. Antenna Parameters
3.2 Return Loss Data
SPE-13-8-063/C/PK | page 5 of 6
Name Material Finish QTY
1 Housing High Temperature TPEE Black 1
2 SMA(M)ST Brass Gold 1
4. Mechanical Drawing
SPE-13-8-063/C/PK | page 6 of 6
Taoglas makes no warranties based on the
accuracy or completeness of the contents
of this document and reserves the right to
make changes to specications and
product descriptions at any time
without notice. Taoglas reserves all
rights to this document and the
information contained herein.
Reproduction, use or disclosure to third
parties without express permission is
strictly prohibited.
Copyright © Taoglas Ltd.
1pcs antenna per small PE bag
100 small PE bags per big PE bag
100pcs antennas per big PE bag
5. Packaging
UNLESS OTHER SPECIFIED TOLERANCES ON：
X＝± X.X＝± X.XX＝
ANGLES＝± HOLEDIA＝±
SCALE： xxxx UNIT：mm
DRAWN BY: Raisa CHECKED BY: Wayne
DESIGNED BY: Eason APPROVED BY: Wayne
TITLE: TI.10 Antenna Assembly DOCUMENT TI.10.0111.HT PAGE REV.
NO. D01
ISO NO: PSP-13-8-xxxx PAGE 7 OF 7
5包裝規格【Package】
5.1 每個小 PE 袋放置 1天線
【1pcs antenna per small PE bag】
5.2 每個大 PE 袋放置 100 個小 PE 袋,如下圖所示
【100small PE bags per big PE bag】
5.3 每包大 PE 袋內數量共 100pcs 天線
【100pcs antennas per big PE bag】
5.4 封口時須注意不可壓到天線,裝入需平整不可雜亂
【Antenna should be placed flat and neat in the PE bag. Hot seal the PE bag without
pressing or damage the antenna】
5.5 清點每袋數量不可短缺
【Confirm the quantity in each PE bag】
TI.10
Small PE Bag
Big PE Bag
