RAYCHEM MOLDED PARTS
© 2011 Tyco Electronics Corporation. All rights reserved CUSTOMER DRAWING
TE Connectivity
305 Constitutional Drive
Menlo Park, CA 94025 USA
Title:
Maulflex Helical Conduit, Inner Sheilded
.
Tyco Electronics reserves the right to amend this drawing at any time.
Users should evaluate the suitability of the product for their application
Document No : MAULFLEX
Cage Code:
06090 Scale:
None Size:
A Rev. Date:
09-JUN-11 Rev.:
C Sheet:
1 of 2
If this document is printed it becomes uncontrolled. Check for the latest revision.
Maulflex
Helical Conduit, Inner Sheilded
Ordering Information
MAULFLEX - 6 X X – SM – XX
Kevlar® is a registered trademark of E.I. du Pont de Nemours & Co.
Product Family Name
Helical Convolex® type
-6 XLETFE per RT-1162 (see note 8)
Shield (see note 6)
1. Single layer tinned copper
2. Two layers tinned copper
Length in inches
Add if srength member is required
(see note 3)
Size number (see table for dimensions)
RAYCHEM MOLDED PARTS
CUSTOMER DRAWING
TE Connectivity
305 Constitutional Drive
Menlo Park, CA 94025 USA
Title: Maulflex
Helical Conduit, Inner Sheilded
© 2011 Tyco Electronics Corporation. All rights reserved.
Tyco Electronics reserves the right to amend this drawing at any time.
Users should evaluate the suitability of the product for their application
Document No : MAULFLEX
Cage Code:
06090 Scale:
None Size:
A Rev. Date:
09-JUN-11 Rev.:
C Sheet:
2 of 2
If this document is printed it becomes uncontrolled. Check for the latest revision.
Table 1: Dimensions (inches)
1 Layer Shield 2 Layer Shield
Size
Number (A)
Minimum Weight
per
100 Feet
(A)
Minimum Weight
per
100 Feet
(B)
Maximum Bend
Radius 7* Helical
Convolex
®
Size
1 .240
(6,10) 4.1
(1,86) .200
(5,08) 6.0
(2,72) .510
(12,96) .88
(22,35) 3/8
2 .312
(7,92) 5.0
(2,27) .270
(6,86) 7.2
(3,27) .571
(14,50) .88
(22,35) 7/16
3 .360
(9,14) 5.8
(2,63) .320
(8,13) 8.6
(3,90) .650
(16,51) 1.25
(31,75) 1/2
4 .480
(12,19) 9.6
(4,35) .440
(11,18) 13.4
(6,08) .770
(19,56) 1.50
(38,10) 5/8
5 .600
(15,24) 11.3
(5,13) .560
(14,22) 18.0
(8,16) .930
(23,62) 1.75
(44,45) 3/4
6 .720
(18,29) 16.6
(7,53) .680
(17,27) 24.1
(10,93) 1.073
(27,25) 2.00
(50,80) 7/8
7 .840
(21,34) 19.1
(8,66) .800
(20,32) 27.7
(12,56) 1.226
(31,14) 2.37
(60,20) 1
8 1.050
(26,67) 28.8
(13,06) 1.000
(25,40) 43.6
(19,78) 1.539
(35,30) 2.75
(69,85 1-1/4
9 1.430
(36,32) 38.4
(17,42) 1.375
(34,93) 56.2
(25,49) 1.975
(50,17) 3.63
(92,20) 1-5/8
Notes
1. Dimensions in table are in Inches ; lbs.
(millimeters) (kgms)
2. Service rating: -55°C (-67°F) to + 150°C (+302°F).
3. Two Kevlar® strength members placed longitudinally 180° apart between shield and convolex tubing.
These Kelvar strength members are to be a minimum of about 12 inches longer than the convolex tubing
with a minimum of 6 inches out each end and stored under the removable tubing.
4. Consult factory for optional configurations.
5. Standard lengths supplied: 4 feet minimum; 24 feet maximum (lengths to be specified when ordering).
6. Shield material, tin coated copper per A-A-59569 and QQ-B-575.
7.* The recommended minimum bend radius that can be achieved without cross sectional area reduction.
8. When used as Maulflex paragraphs 4.3.1, 4.3.2, 4.3.3, 4.3.4, 4.3.5, and Table 2 inside diameter of RT-
1162 are not applicable.
