EZ-LIGHTTM Indicators -- Audible Datasheet E* PI GT A I L * P UR CA E QPMA A BL EU RO YL *C -S T For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com. L L F A C T O RY Contact Factory for more information. Models * * * * * * * * * Rugged, cost-effective, and easy-to-install indicators available in K50 or K80 housing style Steady or pulsed sound indication Illuminated dome provides a big, easy-to-see green, red or yellow job light Compact devices are completely self-contained - no controller needed Choose NPN or PNP input, depending on model Immune to EMI and RFI interference 18 to 30 V dc operation 5-pin M12/Euro-style connection listed Three color LED function: green, red, and yellow 1 Construction K50LGRA1YPQ Steady (75 dB) K50LGRA1YNQ K50LGRA2YPQ K50LGRA2YNQ K50LGRAL1YPQ Pulsed (75 dB) 50 mm dome/30 mm mount polycarbonate K80LGRA1YPQ Steady (75 dB) K80LGRA1YNQ K80LGRA2YPQ K80LGRAL1YPQ 50 mm dome/Flat or DINmount polycarbonate, nylon Pulsed (75 dB) PNP NPN PNP NPN NPN PNP NPN PNP NPN PNP Loud Steady (95 dB) K80LGRAL1YNQ Inputs PNP Loud Steady (95 dB) K50LGRAL1YNQ K80LGRA2YNQ Audible Tone 2 NPN Integral QD models only are listed. * * * * To order the 150 mm PVC pigtail with QD model, replace Q with QP in the model number (example, K50LGRA1YPQP). K50L Models: To order the 2 m (6.5 ft) cable model, omit the suffix Q from the model number (example, K50LGRA1YP). K80L Models: to order the terminal-wired model, omit the suffix Q from the model number (example, K80LGRA2YP). Models with a quick disconnect fitting require a mating cable (see the Accessories section). 1 Contact factory for other colors and color combinations. 2 Typical decibel level is at a distance of 1 m. Original Document 135242 Rev. A 9 October 2014 135242 EZ-LIGHTTM Indicators -- Audible Specifications Supply Voltage and Current 18 to 30 V dc at 40 mA maximum, per LED color (alarm) Indicators LEDs or audible independently selected: green, red, yellow Input Response Time Indicator ON/OFF: 10 ms (maximum) Oscillation Frequency A1 models: 3 kHz 500 Hz A2 models: 3 kHz 500 Hz; pulse rate 3 Hz 20% AL1 models: 2.7 kHz 500 Hz Connections Integral 5-pin M12/Euro-style quick disconnect fitting, or 150 mm PVC pigtail with quick disconnect fitting, or 2 m (6.5 ft) integral cable, depending on model K80L Models: Terminal-wired models for use with bulk cable available Construction See Models table Operating Conditions -20 C to +50 C (-4 F to +122 F) Environmental Rating IP50 Certifications (K50L models only) Dimensions K80L K50L 80.8 mm (3.18") 50.0 mm (1.97") M30 x 1.5 (mounting nut included) Max. Torque 4.5 Nm (40 in-lbf) Internal Threads 1/2 - 14 NPSM Max. Torque 2.25 Nm (20 in-lbf) 65.0 mm (2.56") 109.5 mm (4.31") 38 mm (1.50")* 65.0 mm (2.56") 20 mm (0.79") 11 mm (0.43") 4X O 5.5 mm (O 0.22") Max. Torque 1.12 Nm (10 in-lbf) with supplied screws 4X 8-32 UNC Max. Torque 1.12 Nm (10 in-lbf) 2 66.3 mm (2.61") www.bannerengineering.com - Tel: +1-763-544-3164 Internal Threads 1/2 - 14 NPSM Max. Torque 2.25 Nm (20 in-lbf) 26.0 mm (1.02") M12 X 1 P/N 135242 Rev. A EZ-LIGHTTM Indicators -- Audible Wiring PNP (Sourcing) Input NPN (Sinking) Input Key: 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray G = Green R = Red Y = Yellow A = Alarm Accessories 5-Pin Threaded M12/Euro-Style Cordsets (Single Ended) Model MQDC1-501.5 Length Style 0.50 m (1.5 ft) MQDC1-506 1.83 m (6 ft) MQDC1-515 4.57 m (15 ft) MQDC1-530 9.14 m (30 ft) MQDC1-506RA 1.83 m (6 ft) MQDC1-515RA 4.57 m (15 ft) Dimensions 44 Typ. Straight M12 x 1 o 14.5 2 1 32 Typ. [1.26"] 3 4 30 Typ. [1.18"] Right-Angle MQDC1-530RA Pinout (Female) 9.14 m (30 ft) 5 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray M12 x 1 o 14.5 [0.57"] K80L Brackets SMBDX80DIN 89 Black reinforced thermoplastic Bracket for mounting on a 35 mm DIN rail 89 K50L Brackets P/N 135242 Rev. A www.bannerengineering.com - Tel: +1-763-544-3164 3 EZ-LIGHTTM Indicators -- Audible SMB30A * Right-angle bracket with curved slot for versatile orientation * Clearance for M6 (1/4 in) hardware * Mounting hole for 30 mm sensor * 12-ga. stainless steel 45 C 61 B A 69 C 57 SMB30SC * Swivel bracket with 30 mm mounting hole for sensor * Black reinforced thermoplastic polyester * Stainless steel mounting and swivel locking hardware included 45 C 53 A B 48 B A 67 B 58 29 A Hole center spacing: A=o 50.8 Hole size: A=o 7.0, B=o 30.0 Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=o 6.5, C=o 31.0 SMB30FA * Swivel bracket with tilt and pan movement for precise adjustment * Mounting hole for 30 mm sensor * 12-ga. 304 stainless steel * Easy sensor mounting to extrude rail T-slot * Metric and inch size bolt available 57 70 Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 x 7, B = o 6.4, C = o 30.1 Hole center spacing: A to B=40 Hole size: A=o 6.3, B= 27.1 x 6.3, C=o 30.5 SMBAMS30RA * Right-angle SMBAMS series bracket * 30 mm hole for mounting sensors * Articulation slots for 90+ rotation * 12-ga. (2.6 mm) cold-rolled steel SMB30MM * 12-ga. stainless steel bracket with curved mounting slots for versatile orientation * Clearance for M6 (1/4 in) hardware * Mounting hole for 30 mm sensor 83.2 36.3 68.9 B A 45 SMBAMS30P * Flat SMBAMS series bracket * 30 mm hole for mounting sensors * Articulation slots for 90+ rotation * 12-ga. 300 series stainless steel C 93 A B Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=o 6.5, C=o 31.0 Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 1.5 x 50 Hole size: B= o 30.1 SMB30FVK * V-clamp, flat bracket and fasteners for mounting to pipe or extensions * Clamp accommodates 28 mm dia. tubing or 1 in. square extrusions * 30 mm hole for mounting sensors Hole size: A= o 31 46 A 118 SMB30RAVK * V-clamp, right-angle bracket and fasteners for mounting sensors to pipe or extrusion * Clamp accommodates 28 mm dia. tubing or 1 in. square extrusions * 30 mm hole for mounting sensors A 46 57 90 Hole size: A = o 30.5 Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 135242 Rev. A EZ-LIGHTTM Indicators -- Audible THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. www.bannerengineering.com - Tel: +1-763-544-3164