Special Purpose 859-015 Wire Barrel Reducer Bushing For Use with Crimp Contacts Wire Barrel Reducer Bushing "To" Wire Accommodation See completed part numbers for list of available combinations. 859-015 - Basic Part Number 859-015 Z2 - 16 - 22 Available Finishes Z2 - Gold Plate Z3 - Silver Plate "From" Contact Wire Barrel Size 10, 12, 16, 20 D Material and Finish Copper alloy with gold or silver plate (see part number development) Notes Bushings are designed to reduce the barrel size of crimp contacts to accomodate smaller wire gages than specified in M39029. Bushing must be pressed into contact by hand before crimping. For proper environmental sealing against the rear connector grommet, use of shrink sleeve or potting may be required. (c) 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com D-30 www.glenair.com Special Purpose 859-015 Wire Barrel Reducer Bushing For Use with Crimp Contacts D Max OA OB Part Number 859-015Z2-20-26 859-015Z2-20-28 859-015Z2-16-22 859-015Z2-16-24 859-015Z2-16-26 859-015Z2-16-28 859-015Z2-12-16 859-015Z2-12-18 859-015Z2-12-20 859-015Z2-12-22 859-015Z2-10-12 859-015Z2-10-16 859-015Z2-10-20 (c) 2011 Glenair, Inc. .025 OC .016 x 46 .005 44 OA OB OC D Max .066 .066 .099 .099 .099 .099 .146 .146 .146 .146 .177 / .173 .177 / .173 .177 / .173 .046 .046 .066 .066 .066 .066 .098 .098 .098 .098 .134 .134 .134 .024 .019 .034 .029 .024 .019 .067 .056 .047 .034 .100 .067 .047 .204 .204 .204 .204 .204 .204 .204 .204 .204 .204 .350 .350 .350 Contact Size Standard Wire Accommodation (AWG) Without Bushing 10 12 16 20 22 10 12-14 16-20 20-24 22-28 CAGE Code 06324 Rev. 09.08.16 D Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com D-31 www.glenair.com