Special
Purpose
D-30
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2011 Glenair, Inc. Printed in U.S.A.
CAGE Code 06324
www.glenair.com E-Mail: sales@glenair.com
D
859-015
Wire Barrel Reducer Bushing
For Use with Crimp Contacts
859-015 - Basic
Part Number
Available Finishes
Z2 - Gold Plate
Z3 - Silver Plate
“To” Wire Accommodation
See completed part numbers
for list of available combinations.
“From”
Contact Wire Barrel Size
10, 12, 16, 20
859-015 Z2 -16 -22
Material and Finish
Copper alloy with gold or silver plate (see part number development)
Notes
Bushings are designed to reduce the barrel size of crimp contacts to accomodate smaller
wire gages than specied in M39029.
Bushing must be pressed into contact by hand before crimping.
For proper environmental sealing against the rear connector grommet, use of shrink sleeve
or potting may be required.
Wire Barrel Reducer Bushing
Special
Purpose
D-31
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2011 Glenair, Inc. Printed in U.S.A.
CAGE Code 06324
www.glenair.com E-Mail: sales@glenair.com
Rev. 09.08.16
D
859-015
Wire Barrel Reducer Bushing
For Use with Crimp Contacts
Part Number Ø A Ø B Ø C D Max
859-015Z2-20-26 . . . .
859-015Z2-20-28 . . . .
859-015Z2-16-22 . . . .
859-015Z2-16-24 . . . .
859-015Z2-16-26 . . . .
859-015Z2-16-28 . . . .
859-015Z2-12-16 . . . .
859-015Z2-12-18 . . . .
859-015Z2-12-20 . . . .
859-015Z2-12-22 . . . .
859-015Z2-10-12 . / . . . .
859-015Z2-10-16 . / . . . .
859-015Z2-10-20 . / . . . .
Contact Size Standard Wire Accommodation
(AWG) Without Bushing
 
 -
 -
 -
 -
ØA
ØB ØC
D
Max .025
.016
.005
46°
44°
x