AVB1.0/2/6 - BLOCK - Datasheet.Live

Data sheet: Short Circuit Proof Safety Isolating Transformers Type AVB

----------------------------------------------------------------------------------------------------------------------------------------

Description..............................: Safety isolating transformer constructed and tested according to

VDE 0570/EN 61 558, UL 506, CSA 22.2

Approvals ...............................: According to table

Test voltage............................. PRI - SEC 5000 V, 50 Hz

Short-circuit protection ...........: Inherently short-circuit proof

Construction............................: Open design, potted in insulation housing

Safety class ............................: Prepared for class II equipment

Protection index .....................: Connections IP 00

Housing IP 65

Max ambient temperature .......: According to table

Insulation class of the

insulation system......................: VDE (B= 130°C) ; UL+CSA Class 105 (A=105°C)

Input voltage ...........................: 2 x 115V

Frequency...............................: 50 - 60 Hz

Output voltage.........................: According to table

Connections ............................: Soldering pins for printed circuit board mounting

Packing...................................: Separately packed in cartons

Schematic plan :

transformer specification updated 07/2001

BLOCK TRANSFORMATOREN ELEKTRONIK GMBH & CO. KG, 27283 VERDEN, GERMANY

Subject to change 2

Description :

-------------

These AVB type resin moulded safety isolating transformers,

are inherently short-circuit proof so do not require external

protection. The dual input and output windings are for series or parallel connection.

Note :

* vacuum epoxy resin moulded (self-extinguishing to UL 94 V0)

* 100% tested

* Two chamber bobbin construction

Output power 0,35 VA Core-type EE 20/6,1

Height 15,0 mm Weight 24g

Ground area 22 mm x 22,7 mm

-------------------------------------------

Type SEC rated output-

voltage current

VA Approvals

........................................................................................

AVB 0,35/2/6 2x6 2x0,029 1

........................................................................................

AVB 0,35/2/8 2x8 2x0,021 1

........................................................................................

AVB 0,35/2/9 2x9 2x0,019 1

........................................................................................

AVB 0,35/2/12 2x12 2x0,014 1

........................................................................................

AVB 0,35/2/15* 2x15 2x0,011 1

........................................................................................

AVB 0,35/2/18* 2x182x0,009 1

........................................................................................

AVB 0,35/2/24* 2x24 2x0,007 1

........................................................................................

according to VDE 0570/EN 61 558 -1 : 1997 with part 2-6

* = according to VDE 0570/EN 61 558 -1 : 1997 with part 2-1

Pinning:

Input:2 x 115V..... (1-2) and (3-4)

Output ................. (5-6) and (7-8)

No load output voltage x Factor = typ. 1,8

Core Losses typ. 1,3 W

Efficiency typ. 30 %

Ambient Temperature (ta) +70°C

Approvals (1)

transformer specification updated 07/2001

BLOCK TRANSFORMATOREN ELEKTRONIK GMBH & CO. KG, 27283 VERDEN, GERMANY

Subject to change 3

Output power 0,5 VA Core-type EE 20/10,5

Height 19,0 mm Weight 35g

Ground area 22 mm x 22,7 mm

-------------------------------------------

Type SEC rated output-

voltage current

VA Approvals

........................................................................................

AVB 0,5/2/6 2x6 2x0,041 1

........................................................................................

AVB 0,5/2/8 2x8 2x0,031 1

........................................................................................

AVB 0,5/2/9 2x9 2x0,027 1

........................................................................................

AVB 0,5/2/12 2x12 2x0,020 1

........................................................................................

AVB 0,5/2/15* 2x15 2x0,016 1

........................................................................................

AVB 0,5/2/18* 2x18 2x0,013 1

........................................................................................

AVB 0,5/2/24* 2x24 2x0,010 1

........................................................................................

according to VDE 0570/EN 61 558 -1 : 1997 with part 2-6

* = according to VDE 0570/EN 61 558 -1 : 1997 with part 2-1

Pinning:

Input:2 x 115V..... (1-2) and (3-4)

Output ................. (5-6) and (7-8)

No load output voltage x Factor = typ. 1,8

Core Losses typ. 0,8 W

Efficiency typ. 40 %

Ambient Temperature (ta) +70°C

Approvals (1)

transformer specification updated 07/2001

BLOCK TRANSFORMATOREN ELEKTRONIK GMBH & CO. KG, 27283 VERDEN, GERMANY

Subject to change 4

Output power 1,0 VA Core-type EI 30/10,5

Height 21,8 mm Weight 72g

Ground area 32,3 mm x 27,3 mm

-------------------------------------------

Type SEC rated output-

voltage current

VA Approvals

...............................................................

AVB 1,0/2/6 2x6 2x0,083 1

........................................................................................

AVB 1,0/2/8 2x8 2x0,062 1

........................................................................................

AVB 1,0/2/9 2x9 2x0,055 1

........................................................................................

AVB 1,0/2/12 2x12 2x0,041 1

........................................................................................

AVB 1,0/2/15 2x15 2x0,033 1

........................................................................................

AVB 1,0/2/18* 2x18 2x0,027 1

........................................................................................

AVB 1,0/2/24* 2x24 2x0,020 1

........................................................................................

according to VDE 0570/EN 61 558 -1 : 1997 with part 2-6

* according to VDE 0570/EN 61 558 -1 : 1997 with part 2-1

Pinning:

Input:2 x 115V..... (1-2) and (4-5)

Output ................. (10-9) and (7-6) pin 8 fitted but not connected.

No load output voltage x Factor = typ. 1,32

Core Losses typ. 0,6 W

Efficiency typ. 55 %

Ambient Temperature (ta) +70°C

Approvals (1)

transformer specification updated 07/2001

BLOCK TRANSFORMATOREN ELEKTRONIK GMBH & CO. KG, 27283 VERDEN, GERMANY

Subject to change 5

Output power 1,5 VA Core-type EI 30/12,5

Height 23,8 mm Weight 84g

Ground area 32,3 mm x 27,3 mm

-------------------------------------------

Type SEC rated output-

voltage current

VA Approvals

...............................................................

AVB 1,5/2/6 2x6 2x0,125 1

........................................................................................

AVB 1,5/2/8 2x8 2x0,093 1

........................................................................................

AVB 1,5/2/9 2x9 2x0,083 1

........................................................................................

AVB 1,5/2/12 2x12 2x0,062 1

........................................................................................

AVB 1,5/2/15 2x15 2x0,050 1

........................................................................................

AVB 1,5/2/18* 2x18 2x0,041 1

........................................................................................

AVB 1,5/2/24* 2x24 2x0,031 1

........................................................................................

according to VDE 0570/EN 61 558 -1 : 1997 with part 2-6

*according to VDE 0570/EN 61 558 -1 : 1997 with part 2-1

Pinning:

Input:2 x 115V..... (1-2) and (4-5)

Output ................. (10-9) and (7-6) pin 8 fitted but not connected.

No load output voltage x Factor = typ. 1,39

Core Losses typ. 0,6 W

Efficiency typ. 57 %

Ambient Temperature (ta) +70°C

Approvals (1)

transformer specification updated 07/2001

BLOCK TRANSFORMATOREN ELEKTRONIK GMBH & CO. KG, 27283 VERDEN, GERMANY

Subject to change 6

Output power 2,3 VA Core-type EI 30/18

Height 29 mm Weight 110g

Ground area 32,3 mm x 27,3 mm

-------------------------------------------

Type SEC rated output-

voltage current

VA Approvals

...............................................................

AVB 2,3/2/6 2x6 2x0,191 1

........................................................................................

AVB 2,3/2/8 2x8 2x0,143 1

........................................................................................

AVB 2,3/2/9 2x9 2x0,127 1

........................................................................................

AVB 2,3/2/12 2x12 2x0,095 1

........................................................................................

AVB 2,3/2/15 2x15 2x0,076 1

........................................................................................

AVB 2,3/2/18* 2x18 2x0,063 1

........................................................................................

AVB 2,3/2/24* 2x24 2x0,047 1

........................................................................................

according to VDE 0570/EN 61 558 -1 : 1997 with part 2-6

*according to VDE 0570/EN 61 558 -1 : 1997 with part 2-1

Pinning:

Input:2 x 115V..... (1-2) and (4-5)

Output ................. (10-9) and (7-6) pin 8 fitted but not connected.

No load output voltage x Factor = typ. 1,43

Core Losses typ. 0,6 W

Efficiency typ. 59 %

Ambient Temperature (ta) +70°C

Approvals (1)

transformer specification updated 07/2001

BLOCK TRANSFORMATOREN ELEKTRONIK GMBH & CO. KG, 27283 VERDEN, GERMANY

Subject to change 7

Output power 3,2 VA Core-type EI 38/16,5

Height 30,8 mm Weight 173g

Ground area 41 mm x 35 mm

-------------------------------------------

Type SEC rated output-

voltage current

VA Approvals

...............................................................

AVB 3,2/2/6 2x6 2x0,266 1

........................................................................................

AVB 3,2/2/8 2x8 2x0,20 1

........................................................................................

AVB 3,2/2/9 2x9 2x0,177 1

........................................................................................

AVB 3,2/2/12 2x12 2x0,133 1

........................................................................................

AVB 3,2/2/15 2x15 2x0,106 1

........................................................................................

AVB 3,2/2/18* 2x18 2x0,088 1

........................................................................................

AVB 3,2/2/24* 2x24 2x0,066 1

........................................................................................

according to VDE 0570/EN 61 558 -1 : 1997 with part 2-6

*according to VDE 0570/EN 61 558 -1 : 1997 with part 2-1

Pinning:

Input:2 x 115V..... (1-2) and (4-5)

Output ................. (10-9) and (7-6) pin 8 fitted but not connected.

No load output voltage x Factor = typ. 1,57

Core Losses typ. 0,47 W

Efficiency typ. 58 %

Ambient Temperature (ta) +50°C

Approvals (1)

transformer specification updated 07/2001

BLOCK TRANSFORMATOREN ELEKTRONIK GMBH & CO. KG, 27283 VERDEN, GERMANY