M630x Series 5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/CMOS, TCXO/TCVCXO QiK ChipTM Features: TCXO/TCVCXO Featuring QiK ChipTM Technology Superior Jitter Performance (comparable to SAW based) Frequencies from 50 MHz to 1.4 GHz Designed for a short 2 week cycle time Applications: Telecommunications such as SONET / SDH / DWDM / FEC / SERDES / OC-3 thru OC-192 Wireless base stations / WLAN / Gigabit Ethernet Avionic flight controls and military communications , CMOS) , CMOS) Temperature vs. Stability T S A = Available N = Contact Factory MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Revision: 3-24-09 M630x Series 5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/CMOS, TCXO/TCVCXO Parameter Frequency Range Operating Temperature Storage Temperature Frequency Stability Frequency Tolerance at +25C Frequency Vs. Aging Symbol F TA TSTG Frequency Vs. Supply Voltage Frequency Vs. Reflow Frequency Vs. Load Operating Voltage Electrical Specifications Operating Current Vcc/Vs/Vdd ICC Rise/Fall Time Tr/Tf Logic "1" Level VOH Logic "0" Level VOL Common Mode Output Voltage Symmetry (Duty Cycle) Vcm Output Voltage Level Tuning Range Output Skew Output Load 50 to (VCC-2) VDC 100 Differential 15 80% Enable/Disable Function 10 Hz -60 -73 -80 80% 100 Hz -90 -97 -102 1 kHz -120 -123 -130 Units MHz MHz C C ppm ppm ppm ppm ppm ppm ppm V V V mA mA mA mA ns ns V V V V V % % % Vp-p ppm ps ps ps pF 0.5 0.5 V V 10 kHz -127 -131 -137 100 kHz -133 -136 -141 Conditions/Notes LVPECL, LVDS, CML (Note 4) CMOS See Note 1 st 1 year Per year thereafter. 5% voltage variation 2 reflows max. 5% supply voltage variation M6300 M6301 M6302 LVPECL LVDS CML CMOS PECL, LVPECL, LVDS CMOS LVPECL CMOS LVPECL CMOS LVDS @ 50% Vdd (CMOS) @ 50% of waveform (LVPECL) @ 1.25 V (LVDS) CML VCTCXO only. See Note 2. LVPECL CML LVDS See Note 3 LVPECL LVDS, CML CMOS Outputs enabled (Option B or G) Outputs disabled Outputs enabled (Option S or M) Outputs disabled Offset from carrier dBc/Hz dBc/Hz dBc/Hz Environmental Phase Noise (Typical) @ 622.080 MHz (LVPECL) @ 100.000 MHz (HCMOS) @ 50.000 MHZ (HCMOS) Min. Typ. Max. 50 1400 50 135 See Ordering Information -55 +125 See Ordering Information -1.0 +1.0 -3.0 + 3.0 -1.0 + 1.0 0.4 0.75 0.2 3.135 3.3 3.465 2.375 2.5 2.625 1.71 1.8 1.89 125 100 110 90 0.35 6 VCC-1.02 90% Vdd VCC-1.63 10% Vdd 1.2 45 55 45 55 45 55 0.7 0.95 1.2 5 20 15 20 Shock Per MIL-STD-202, Method 213, Condition C Vibration Per MIL-STD-202, Methods 201 & 204 Solderability Per EIAJ-STD-002 -8 Hermeticity 1 X 10 atm cc/sec of helium (Crystal only) Thermal Shock Per MIL-STD-883, Method 1011, Condition A Thermal Cycle Per MIL-STD-883, Method 1010, Condition B Note 1: Contact factory for less than 1ppm frequency stability. Note 2: Contact factory for other Tuning Range options. Note 3: See Load Circuit Diagram in this data sheet. Note 4: Contact factory for frequencies over 945 MHz. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Load Circuit Diagrams Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.