VANDAL RESISTANT PUSHBUTTONS P5-V VANDAL RESISTANT PUSHBUTTONS ALTERNATE ACTION, SEALED AGAINST DUST & MOISTURE The P5-V switch gives you all the functionality of the P5 Alternate Action switch with the added benefit of an aluminum security level case and button or a stainless steel vandal resistant case and button. Push and the P5-V switch turns "on." Push again and the switch turns "off." Positive tactile feedback is featured so the operator is clearly aware the switch has been actuated. The button returns to the original position after each actuation. To guard against front panel splash and dirt the P5-V is sealed at the button with OTTO's patented "rolling sleeve" design. The terminals are sealed with epoxy, providing a seal against flux during wiring and behind panel dirt and moisture. The combination of sealing provides smooth operation over a wide temperature range. Watertight sealing to IP68S is also available. High Profile Flat Button High Profile Curved Button We are able to provide custom button engraving with epoxy ink backfill and other special characters, shrouded buttons, contact configurations and materials to suit your application requirements. Features: * Security (aluminum) or vandal resistant (stainless steel) case & button * Button sealed with patented "rolling sleeve" design * Contact area sealed at case & terminals * Watertight to IP68S or dusttight & moistureproof to IP64 * Less than 25m contact resistance * Handles low level up to 10 amps * 1 million mechanical cycle life * RoHS & WEEE Compliant Standard Characteristics/Ratings: ELECTRICAL RATINGS: Load Sea Level @ 28VDC or 115VAC, 60/400Hz Resistive 10A Inductive 5A Lamp 1A Motor 3A DWV 1050Vrms Low Level 10mA @ 30mV Electrical Life: 25,000 cycles Mechanical Life: 1,000,000 cycles Seal: IP64 or IP68S Operating Temp Range: -55C to +85C Operating Force: 3.0 lbs. +1/-0.5 lb. Total Travel: 0.180 inches max Overtravel: 0.012 inches min MATERIALS: Case: Anodized aluminum alloy or stainless steel Button: Anodized aluminum alloy or stainless steel Terminals: Brass with gold over silver Terminal Hardware: Screw, lockwasher and terminal lug when applicable Mounting Hardware: Hex nut or knurl nut, lockwasher and panel seal when applicable PUSHBUTTONS Specifications Subject To Change Without Notice www.ottoexcellence.com 122 P5-V VANDAL RESISTANT PUSHBUTTONS VANDAL RESISTANT PUSHBUTTONS SEALED AGAINST DUST & MOISTURE High Profile, Flat Button Low Profile, Curved Button Bezel Profile/Button Style 1 Bezel Profile/Button Style 4 .87 A .17 .88 1.47 MAX. .44 2X 1.45 MAX. .44 .14 .57 .565 B B A High Profile, Curved Button Flush Mount, Flat Button Bezel Profile/Button Style 2 Bezel Profile/Button Style 5 1.39 MAX. .87 .24 A .44 .17 1.39 MAX. .047 .44 .57 .57 B A B .88 Low Profile, Flat Button Bezel Profile/Button Style 3 A .08 .44 .59 or .594 TO FLAT 1.40 MAX. .625-24 UNEF-2A .57 .750-20 UNEF-2A Case Style 1-4 Dimension A (Button Dia.) B (Thread) D-Flat B .88 .718 TO FLAT 0.53 0.625-24 UNEF-2A 0.59 or 0.594 5-8 0.590 0.750-20 UNEF-2A 0.718 P5 PART NUMBER CODE P5 - X X X X X X 123 Type Thread Terminal Style/ Bezel Color Circuit Form/ Contact Material Seal Bezel Profile/ Button V. Stainless A. Aluminum 1. 5/8-24 & Hex Nut 2. 5/8-24 & Knurl Nut 3. 5/8-24 W/D-Flat & Hex Nut 4. 5/8-24 W/D-Flat & Knurl Nut 5. 3/4-20 & Hex Nut 6. 3/4-20 & Knurl Nut 7. 3/4-20 W/D-Flat & Hex Nut 8. 3/4-20 W/D-Flat & Knurl Nut 1. Solder Terminal/Silver 2. Screw Terminal/Silver 3. Solder Terminal/Black 4. Screw Terminal/Black 1. SPST/Silver 2. SPST/Gold 3. SPDT/Silver 4. SPDT/Gold 1. Dusttight 2. Watertight 1. High Profile/Flat Button 2. High Profile/Curved Button 3. Low Profile/Flat Button 4. Low Profile/Curved Button 5. Flush Profile OTTO Full Line Catalog Only Available on P5-A Styles. Screw terminals available on SPST circuits only. Specifications Subject To Change Without Notice