CS 19 Phase Control Thyristor VRSM VDSM V 800 1200 VRRM VDRM V 800 1200 Type VRRM = 800/1200 V IT(RMS) = 29 A IT(AV)M = 19 A TO-263 AA TO-220 AB Type A C TO-220 TO-263 CS 19-08ho1 CS 19-08ho1S CS 19-12ho1 CS 19-12ho1S C A G G h A (TAB) C G h A (TAB) A = Anode, C = Cathode, G = Gate Symbol Conditions IT(RMS) IT(AV)M TVJ = TVJM TC = 85C, 180 sine ITSM TVJ = 45C VR = 0 V I2t (di/dt)cr Maximum Ratings * SCR for frequency up to 400 Hz * International standard package * High performance glass passivated chip * Long-term stability of leakage current and blocking voltage * Epoxy meets UL 94V-0 29 19 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 160 180 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 140 160 A A TVJ = 45C VR = 0 V t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 128 134 A2s A2s TVJ = TVJM VR = 0 V t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 100 105 As A2s TVJ = TVJM; f = 50 Hz; tp = 200 s repetitive, IT = 20 A 100 A/s non repetitive, IT = IT(AV)M 500 A/s Advantages * Space and weight savings * Simple mounting VD = 2/3 VDRM IG = 0.15 A diG /dt = 0.15 A/s 2 (dv/dt)cr TVJ = TVJM; VD = 2/3 VDRM RGK = ; method 1 (linear voltage rise) 500 V/s PGM TVJ = TVJM; tp = 30 s IT = IT(AV)M; tp = 300 s 5 2.5 0.5 W W W VRGM 10 V TVJ TVJM Tstg -40 ... +125 125 -40 ... 125 C C C 0.45 0.55 Nm Nm 2 g PGAV Features Md Mounting torque with screw M3; TO-220 Mounting torque with screw M3.5; TO-220 Weight typ. Applications * Motor control * Power converter * AC power controller * Light and temperature control * SCR for inrush current limiting in power supplies or AC drive Data according to IEC 60747 IXYS reserves the right to change limits, test conditions and dimensions. 20071212a -3 (c) 2007 IXYS All rights reserved http://store.iiic.cc/ CS 19 Symbol Conditions Characteristic Values typ. IR, ID VR = VRRM; VD = VDRM; TVJ = TVJM VT IT = 20 A; TVJ = 25C VT0 rT For power-loss calculations only TVJ = 125C VGT VD = 6 V; IGT VD = 6 V; VGD IGD VD = 2/3 VDRM; IL max. 5 mA 1.6 V 0.85 27 V mW TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C 1.5 2.5 28 50 V V mA mA TVJ = TVJM 0.2 3 V mA tp = 10 s; TVJ = 25C IG = 0.1 A; diG /dt = 0.1 A/s 75 mA IH VD = 6 V; RGK = ; TVJ = 25C 50 mA tgd VD = 1/2 VDRM; TVJ = 25C IG = 0.1 A; diG/dt = 0.1 A/s 2 s RthJC RthJH DC current DC current 1.0 K/W K/W a Max. acceleration; 50 Hz 50 m/s2 0.25 TO-220 AB Dimensions (1 mm = 0.0394") M C Dim. B E D F N A H G J K L Q R Millimeter Min. Max. Inches Min. Max. A B 12.70 14.73 13.97 16.00 0.500 0.580 0.550 0.630 C D 9.91 3.54 10.66 4.08 0.390 0.139 0.420 0.161 E F 5.85 2.54 6.85 3.18 0.230 0.100 0.270 0.125 G H 1.15 2.79 1.65 5.84 0.045 0.110 0.065 0.230 J K 0.64 2.54 1.01 BSC 0.025 0.100 0.040 BSC M N 4.32 1.14 4.82 1.39 0.170 0.045 0.190 0.055 Q R 0.35 2.29 0.56 2.79 0.014 0.090 0.022 0.110 TO-263 AA IXYS reserves the right to change limits, test conditions and dimensions. 20071212a -3 (c) 2007 IXYS All rights reserved http://store.iiic.cc/ CS 19 50 100 200 1: IGT, TVJ = 125C 2: IGT, TVJ = 25C 3: IGT, TVJ = -40C 50 Hz, 80% VRRM 40 150 10 20 TVJ = 45C 100 6 VG [V] IT [A] ITSM [A] 30 5 3 1 TVJ = 125C 10 0 TVJ = 125C 0 1 VT [V] 4: PGAV = 0.5 W 5: PGM = 1 W 6: PGM = 10 W IGD, TVJ = 125C TVJ = 25C 2 0 0.001 3 0.01 t [s] 0.1 0.1 1 1 10 Fig. 3 Fig. 2 Surge overload current ITSM: crest value, t: duration 40 30 25 DC 180 sin 120 rect 60 rect 30 rect 20 DC 180 sin 120 rect 60 rect 30 rect 30 IT(AV)M [A] 50 1000 Gate trigger range 35 RthJA: 1.5 K/W 2.5 K/W 3.5 K/W 5 K/W 7 K/W 10 K/W 100 IG [mA] 60 PT [W] 1 50 Fig. 1 Forward characteristics 20 15 10 10 0 4 2 5 0 5 10 15 20 IT(AV)M [A] Fig. 4 25 0 25 50 75 Tamb [C] 100 125 Power dissipation versus forward current and ambient temperature 0 0 20 Fig. 5 40 60 80 100 120 Tcase [C] Max. forward current at case temperature 1000 typ. Limit tgd [s] 100 10 s 1 10 100 IG [mA] 1000 t Fig. 6 Forward characteristics IXYS reserves the right to change limits, test conditions and dimensions. (c) 2007 IXYS All rights reserved 20071212a -3