AZ2280 40 AMP MINIATURE POWER RELAY FEATURES * * * * * * * Quick-connect leads for contacts and coil 1 Form A, B and C contacts available AC and DC coils available Epoxy sealed IP67 approved versions available UL Class F (155C) standard UL, CUR file E44211 VDE 40027037 ( DC coil only ) GENERAL DATA CONTACTS Arrangement Ratings UL, CUR SPST (1 Form A, or B) SPDT (1 Form C) Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 28A, 277VAC Res. [N.O.] Resistive load: Operate Time (max.) 15ms at nominal coil voltage Max. switched power: 840W or 11,080VA Max. switched current: 40A (Form A), 15A (Form B), 20A (Form C) Max. switched voltage: 277VAC, 28VDC Release Time (max.) 10ms at nominal coil voltage (with no coil suppression) 1 Form A 40A at 277VAC, General Use [1][2] 28A at 277VAC, General Use, 100k cycles [1] 2Hp at 250VAC [1][2] 1HP at 125VAC [1][2] 30A at 28VDC [1] 20/60 (FLA/LRA) at 277VAC 30k cycles [1] 1 Form B 15A at 277VAC, General Use [1] 10A at 28VDC [1] 0.5HP at 250VAC [1] 0.25HP at 125VAC [1] 10/33 (FLA/LRA) at 277VAC 30k cycles [1] 1 Form C 30/20A (N.O./N.C.) at 277VAC, General Use [1][2] 20/10A (N.O./N.C.) at 28VDC[1] 2/0.5HP (N.O./N.C.) at 250VAC[1][2] 1/0.25HP (N.O./N.C.) at 125VAC[1][2] 20/60 (FLA/LRA) at 277VAC 30k cycles N.O. [1] 10/33 (FLA/LRA) at 277VAC 30k cycles N.C. [1] VDE Contact factory for ratings Material Silver cadmium oxide [1], silver tin oxide [2] Resistance < 50 milliohms initially (24V, 1A voltage drop method) COIL Power Dielectric Strength 1500 Vrms contact to contact (at sea level for 1 min.) 2500 Vrms contact to coil Insulation Resistance 1000 megohms min. at 500 VDC, 20C 50% RH Dropout DC: Greater than 10% of nominal coil voltage AC: Greater than 20% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -55C (-67F) to 85C (185F), [DC] -55C (-67F) to 60C (140F), [AC] -55C (-67F) to 155C (311F) Storage Vibration 0.062" DA at 10-55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, Quick Connects Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Max. Solder Temp. 270C (518F) Max. Solder Time 5 seconds Max. Solvent Temp. 80C (176F) Max. Immersion Time 30 seconds Weight (approx.) 36 grams At Pickup Voltage (typical) DC: 500mW AC: 1.4VA Max. Continuous Dissipation DC: 1.7W at 20C (68F) AC: 2.7VA at 20C (68F) Temperature Rise 38C (68F) 2. Relay may pull in with less than "Must Operate" value. Max. 155C (311F) 3. Specifications subject to change without notice. Temperature NOTES 1. All values at 20C (68F). 1/18/18 AZ2280 RELAY ORDERING DATA COIL SPECIFICATIONS - DC Coil Nominal Coil VDC 5 Must Operate VDC 3.75 Max. Continuous VDC 6.4 Nominal Current mA 10% 185 Coil Resistance 10% 27 ORDER NUMBER* AZ2280-1A-5DF 6 4.50 7.8 150 40 AZ2280-1A-6DF 9 6.75 12.2 93 97 AZ2280-1A-9DF 12 9.00 15.4 77 155 AZ2280-1A-12DF 15 11.25 19.8 59 256 AZ2280-1A-15DF 18 13.5 24.1 47 380 AZ2280-1A-18DF 24 18.00 32.0 36 660 AZ2280-1A-24DF 48 36.00 62.6 19 2560 AZ2280-1A-48DF 82.5 146.6 13450 AZ2280-1A-110DF 110 8.2 COIL SPECIFICATIONS - AC Coil 50/60 Hz Coil Resistance 10% 25 ORDER NUMBER* Nominal Coil VAC 12 Must Operate VAC 10.2 Max. Continuous VAC 13.8 Nominal Coil Power VA 2.3 24 20.4 27.6 2.1 100 120 102.0 138.0 2.3 2,500 AZ2280-1A-120AF 208 176.8 239.0 2.2 11,000 AZ2280-1A-208AF 220/240 187.0 276.0 2.2/2.6 13,490 AZ2280-1A-240AF 277 235.4 318.5 2.2 15,000 AZ2280-1A-277AF AZ2280-1A-12AF AZ2280-1A-24AF *Substitute "-1B" or "-1C" in place of "-1A" for 1 Form B or 1 Form C respectively. For silver tin oxide contacts substitute "-1AE" or "-1CE" in place of "-1A" or "1C." Add "T" to "-1A", "-1AE", "-1B", "-1C" or "-1CE" for extended life contacts. Substitute "DEF" or "AEF" in place of "DF" or "AF" for epoxy sealed version IP67 approved. For 0.110 coil terminals change "F" to "KF." MECHANICAL DATA 1.08 (27.5) 1.09 (27.8) 0.25 x 0.032 0.003 3 places (6.35 x 0.813) (0.08) 1.27 (32.4) 1.98 1.71 (50.2) (43.5) 0.187 x 0.02* (4.75 x 0.51) 0.003 (0.08) 2 places 0.14 (3.5) * "K" = 0.110 x .02 WIRING DIAGRAM (Top View) 3 2 4 1 5 1 FORM A 3 2 1 5 1 FORM B 2 4 1 5 1 FORM C Dimensions in inches with metric equivalents in parentheses. Tolerance: .010" 1/18/18