DO NOT
SCALE FROM
THIS PRINT
No OF POSITIONS
-02 THRU -50
-DV: DOUBLE VERTICAL
-TV: TRIPLE VERTICAL (-02 THRU -30 ONLY)
(USE HTSW-50-T-LCP, SEE NOTE 8)
-TM: TRIPLE MIXED TECHNOLOGY (-02 THRU -30 ONLY)
(USE HTSW-50-T-LCP, AVAILABLE ON -01 LEAD STYLE ONLY)
LEAD STYLE
(SEE TABLE 1)
PLATING SPECIFICATION
-T: MATTE TIN ON ENTIRE PIN.
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-G: 10µ" SELECTIVE GOLD IN CONTACT AREA,
3µ" SELECTIVE GOLD ON TAIL.
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-TL: TIN/LEAD (90/10) ON ENTIRE PIN.
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA,
TIN/LEAD (90/10) ON TAIL.
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-H: 30µ" SELECTIVE GOLD IN CONTACT AREA,
3µ" SELECTIVE GOLD ON TAIL.
-TM: MATTE TIN ON ENTIRE PIN.
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-SS: 30µ" STRIPE SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL. (SEE NOTE 10)
OPTION #3
(AVAILABLE FOR -DV MOUNT STYLE ONLY)
-LC: LOCKING CLIP (SEE FIG 2, SHT 2)
(USE LC-05-TM)
(-03 THRU -36 POS, USE 2 PER STRIP)
(-02 POS, USE 1 PER STRIP)
(USE RTSM-XX-DVU)
(SEE NOTE 9)
-A: ALIGNMENT PIN (SEE FIG 3, SHT 2)
(FOR MOLDED TO POSITION, USE RTSM-XX-DVU-XX BODY)
(FOR STAKED, USE RTSM-50-DVU BODY, 5 POS MIN)
(LEAVE BLANK FOR NO HOLD DOWN OPTION)
USE RTSM-50-DVU SEE FIG 1, CAN BE CUT TO POSITION)
(NOT AVAILABLE WITH -TV & -TM MOUNT STYLES)
-P: PICK AND PLACE PAD
(USE PPP-06, SEE FIG 4, SHT 2)
(AVAILABLE ON POS -04 THRU -36, -50)
(AVAILABLE ON POS -02 & -03 WITH -TR
OPTION ONLY, SEE NOTE 5)
-M: METAL PICK AND PLACE PAD
(USE LMP-01 OR MPP-01, SEE FIG 5, SHT 2)
(NOT RECOMMENDED WITH -T OR -TM PLATING)
(LEAD STYLES -01 & -04 ONLY)
(AVAILABLE ON POS 04 THRU 36)
(AVAILABLE ON POS 02 AND 03 WITH -TR
OPTION ONLY, SEE NOTE 5)
-TR: TAPE AND REEL (SEE FIG 8, SHT 3)
(02 THRU 28 POS)
OPTION #2
OPTION #1
MOUNT STYLE
TSM-1XX-XX-XXX-XX-X-XXX-X
.025
SQ
0.64
REF (TYP)
.100
REF
2.54
2
MAX SWAY
(EITHER DIRECTION)
"C" MAX
(SEE TABLE 1)
.200 5.08
REF
(NO OF POS x .100[2.54])
(NO OF POS -1) x .100[2.54]
5
MAX SWAY
(EITHER DIRECTION)
+.000[0.00]
-.015[0.38]
01
RTSM-50-DVU
02
03
90°
-
0°
+
5°
(TYP)
"B"
(SEE TABLE 1
& NOTE 2)
.050
±.010
(TYP)
1.27
±0.25
(SEE NOTE 6)
.100 2.54
2
MAX SWAY
(EITHER DIRECTION)
SEE TABLE 5
"B"
(SEE TABLE 1
& NOTE 2)
IN-PROCESS
-DV MOUNT STYLE
C
C
FIG 1
TSM-1XX-XX-XXX-DV SHOWN
POLARIZED POSITION
SPECIFY OMITTED PIN
DB
DB
DB
C
C
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
DOUBLE ROW GULLWING ASM
BY:
TSM-1XX-XX-XXX-XX-X-XXX-X
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRYANT
04/24/1991
3
1
SHEET SCALE: 2:1
INSULATOR: LCP, UL94VO, COLOR: BLACK
TERMINAL: PHOS BRONZE
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM POST HEIGHT VARIATION: .005[0.13].
3.
LOAD PARTS POS 1 IN SAME DIRECTION AS ARROW.
4. TUBE POSITIONS 03 THRU 50.
5. TAPE & REEL AVAILABLE ON POSITION 02 THRU 28 ONLY.
LEADS MAY NOT BE VISIBLE FOR CUSTOMER'S VISUAL
INSPECTION ON SMALLER POSITIONED PARTS WHEN USED
WITH THE -P OR -M OPTIONS.
6. MEASURE AT BEND RADIUS.
7. MINIMUM PUSHOUT FORCE: 3 LBS.
8. FOR -TV USE T-31724-01.
9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,
THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT.
SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL
ASSEMBLIES WITH THE -LC OPTION.
10. ONLY AVAILABLE ON -01-DV OPTION, MATES ONLY WITH
SSM, SSW, SSQ, BCS, ESW AND ESQ.
11. MAXIMUM CUT FLASH: .005[0.13].
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION DB
.110 2.79
.045 1.14
REF
(NO OF POS -2) x .100[2.54]
FIG 2
-LC: LOCKING CLIP
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
LC-05-TM
"A"
(NO OF POS -2) x .100[2.54]
FIG 3
-A: ALIGNMENT PIN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(SEE TABLE 3)
.062
REF
1.57
.047
REF
1.19
.270 6.86
REF
"D"
±.010[0.13]
FIG 4
-P: PICK AND PLACE PAD
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"G"
±.020[0.51]
.390 9.91
REF
.0790 2.007
"F"
FIG 5
-M: METAL PICK AND PLACE PAD
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"E" = ((NO OF POS x .100[2.54]) - .225[5.72])/2
NOTE:
HAND FILL USE MPP-01 AND/OR LMP-01
MACHINE FILL USE LMP-01
.225 5.72
REF
"E"
±.020[0.51]
.164 4.17
"G" = ((NO OF POS x .100[2.54]) - .390[9.91])/2
CRITICAL DIMENSION INSPECTION INSTRUCTION
TABLE
ASSEMBLY OPERATION
IN-PROCESS INSPECTION
FILL T-1S6-XX-XXX-2
C1
FORM T-1S6-XX
C2, C3, C4, C5
SHEET OF
DOUBLE ROW GULLWING ASM
BY:
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRYANT
04/24/1991
3
2
SHEET SCALE: 2:1
REVISION DB
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
TSM-1XX-XX-XXX-XX-X-XXX-X
.150
±.010
3.81
±0.25
.100
REF
2.54
FIG 6
-TM: TRIPLE MIXED TECHNOLOGY
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
HTSW-50-T-LCP
.230 5.84
(SEE TABLE 2)
(SEE NOTE 2)
.050
±.010
(TYP)
1.27
±0.25
(SEE NOTE 6)
.450
±.015
11.43
±0.38
90°
±3°
(TYP)
.100 2.54
T-1S6-17-XXX-2
(SEE TABLE 5, SHT 1)
.230
-
.005
+
.000 5.84
-
0.13
0.00
.150
REF
3.81
IN-PROCESS
-TM MOUNT STYLE
FIG 7
-TV: TRIPLE VERTICAL
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
.050
±.010
1.27
±0.25
(SEE TABLE 5, SHT 1)
.0500 1.270
REF (TYP)
.020 0.51
REF (TYP)
.2980 7.569
REF (TYP)
.050 1.27
REF (TYP)
.0490 1.245
REF (TYP)
.1000 2.540
REF (TYP)
.230
-
.005
+
.000 5.84
-
0.13
0.00
.150
REF
3.81
IN-PROCESS 1
-TV MOUNT STYLE
.230
-
.005
+
.000 5.84
-
0.13
0.00
.050
±.010
1.27
±0.25
IN-PROCESS 2
-TV MOUNT STYLE
.230
-
.005
+
.000 5.84
-
0.13
0.00
.150
REF
3.81
IN-PROCESS 3
-TV MOUNT STYLE
USER DIRECTION OF UNREELING
POCKET NOT DETAILED
PIN 1
ROUND HOLES
OBLONG HOLES
FIG 8
PACKAGING VIEWS
DB
C
C
01
03
SHEET OF
DOUBLE ROW GULLWING ASM
BY:
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRYANT
04/24/1991
3
3
SHEET SCALE: 2:1
REVISION DB
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
TSM-1XX-XX-XXX-XX-X-XXX-X
