DS9093S - Dallas Semiconductor

patents and other intellectual property rights, please refer to

Dallas Semiconductor data books.

DS9093x

Touch Memory Mount Products

DS9093x

011296 1/2

FEATURES

•Key ring mount version:

– DS9093F snap–in fob for use with flanged

MicroCan (F3/F5 package)

– DS9093N angled fob for use with flanged Micro-

Can (F5 package)

– DS9093A snap–in angled fob for use with

flanged Micro–Can (F5 package)

•Two permanent mount versions:

– DS9093S allows a Touch Memory to be easily

and permanently attached to an object using

screws or rivets (F5 package)

– DS9093P has a locating pin and a single mount-

ing hole for permanent attachment (F5 package)

•Prepunched hole mount:

– DS9093RA lock ring firmly fastens F5 package

– DS9093RB flange enlargement provides addi-

tional flange surface area if needed

KEY RING MOUNTS

R7.1

6.3

R8.2 3 PL.

R8.7

15.1 A

22.7 38.1

7.7

20.6

4.8

3.4

SECTION A–A

SECTION B–B

2.2

DS9093F

DS9093N

48.3 mm

12.7 mm

21.6 mm

DS9093A

DESCRIPTION

The DS9093 Touch Memory Mount Products offer the

user low–cost fixtures that hold a Touch Memory for

thumbpad applications or permanent attachment to an

object.

The DS9093F plastic snap–in fob offers the simplest

way to mount a Touch Memory for applications that

require only momentary contact. The fob can be

attached to a key ring for carrying. Do not apply solvents

or adhesives to this fob. This might affect the mechani-

cal strength and reliability.

All dimensions are in millimeters.

DS9093x

011296 2/2

The DS9093N angled fob is an alternate way to mount a

Touch Memory for applications that require only mo-

mentary contact. Due to the different mounting tech-

nique, the DS9093N can be used with the F5 MicroCan

only. The Touch Memory is inserted into this fob by

press-fitting. For permanent mount, the Touch Memory

can be locked by a DS9093RA Lock Ring.

The DS9093A is very similar to the DS9093N. It has

about the same size as the DS9093N and can be used

with the F5 MicroCan only. The Touch Memory is

inserted by press–fitting the flange of the MicroCan into

the cavity of the fob. In contrast to the DS9093N, no

additional parts are needed for permanent mounting.

The DS9093A is available in black, blue, green, red and

yellow.

THROUGH–MOUNT FOR CONTAINERS

TOUCH DEVICE

DS9093P/S

5.3

3.0 MINIMUM REQUIRED

CLEARANCE B

SECTION A–A

46.9 4.4

2.0

5.2 DIA.

35.0

5.0

3.8 REF.

NOTE: PIN IS REPLACED

WITH A THRU HOLE

ON DS9093S b)

30.9

2.0

SECTION B–B

NOTE: PIN IS REPLACED

WITH A THRU HOLE

ON DS9093S

DIA.

The DS9093S and DS9093P allows the user to perma-

nently attach a Touch Memory to an object with one or

two screws, rivets, etc. The plastic plate is designed with

an inset that accommodates the flange of the F5

package and allows for flush mounting. A protective wall

is provided along the sides of the plate to reduce inci-

dental damage to the Touch Memory.

The DS9093RA Lock Ring is a stainless steel fastener

which provides an inexpensive method for firmly attach-

ing a Touch Memory to any item with a pre–punched

hole. The Touch Memory is inserted through the hole

and is restrained by the flange on the Touch Memory.

The DS9093RA Lock Ring is crimped onto the portion of

the Touch Memory which protrudes through the hole.

The optional DS9093RB Flange Enlargement is a thin

stainless steel washer that provides additional surface

area to improve retention of the Touch Memory in mate-

rials that are very thin or flexible. The DS9093RB is

formed with a slight dome to improve the gripping force

exerted onto the pre–punched material. The domed

side of the washer should face the flange of the Touch

Memory, the flat side should face the material.

16.23 mm

0.30 mm

16.51 mm

0.51 mm

DS9093RB

DS9093RA

19.05 mm

DS9093RA AND DS9093RB APPLICATION

DS9093RA FLANGE OF

TOUCH

ÉÉ

DS9093RB

FLANGE ENLARGEMENT

LOCK RING

MEMORY

(OPTIONAL)

TOUCH MEMORY