Specifications subject to change without notice. Dimensions (mm). See Appendix A for
recommended power cord. See PDI full line catalog for detailed specifications on power cords.
IEC 60320 INLET SOCKET WITH SINGLE OR DOUBLE FUSE HOLDER,
SNAP-IN OR FLANGE MOUNT
HGN-365A
MECHANICAL DIMENSIONS
FEATURES
The HGN-365A filter series offers a wide variety of options
with a current rating up to 10A, 250VAC. This power entry
module offers industry standard 5 x 20mm fuse/s with IEC
connector. This series offers an option of having a single or
double fuse in the same package. These filters are also used
for health care equipment and offer extremely low leakage
current to comply with UL544 & 2602.
A Ground Choke can be added to enhance the grounding
ability of the circuit. A bleeder resistor can also be added to
prevent excessive voltages from developing across the filter
capacitors when there is no load.
APPLICATIONS
Computer & networking equipment, Measuring & control
equipment, Data processing equipment, laboratory instruments,
Switching power supplies, other electronic equipment.
TECHNICAL DATA
•Rated Voltage: 115/250VAC
•Rated Current: 1A, 2A, 3A, 4A, 6A, 8A, 10A
•Power Line Frequency: 50/60Hz
•Max. Leakage Current each
Line to Ground:
@ 115VAC 60Hz: 0.5mA
@ 250VAC 50Hz: 1.0mA
@ 115VAC 60Hz: 2µA*
@ 250VAC 50Hz: 5µA*
•Hipot Rating (one minute)
Line to Ground: 2250VDC
Line to Line: 1450VDC
•Temperature Range: -25C to +85C
* Medical application
Panel Thickness 1mm to 1.6mm
(Unit:mm)
Use only with a 250V Fuse
31.0 33.0 35.0
30.8
28.3
33.0
36.0
44.0
28.3
31.0
2x 3.6
2x 6
Use only with a 250V Fuse
28.5
32.3
SUGGESTED PANEL CUTOUT
(MOUNTING FROM FRONT)
THICKNESS OF PANEL IS FROM
1.00mm to 1.6mm
27.8
6.3
(58.4)
48.5
42.6
31.0
RECOMMENDED
PANEL CUTOUT
(MOUNTING FROM FRONT)
2x 3.6
36.0
28.0 Max
32.4 Typ.
27.8
6.3
(58.4)
48.5
42.6
31.0
SNAP-IN
FLANGE MOUNT
70
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076
e-mail: filtersales@powerdynamics.com •
www.powerdynamics.com
CURRENT RATING (A): = 01
= 02
= 03
= 04
= 06
= 08
= 10
TERMINAL: = Q
= S
= W
FUSE OPTION: = 1
= 2✝
QUICK CONNECT
SOLDER
WIRE
1 FUSE (5X20MM)
2 FUSE (5X20MM)
HGN-365A Series Example & Ordering Code
6.3/0.25
4.0/0.187
UL 1015, 18AWG
STRANDED, 4”
ASCHEMATICS
MEDICAL
SCHEMATICS
1
2
3
* VDE submitted
6.6
2.0-3.0L
S
OPTIONS: = 0
= 5
= 6
= 7
= 8
= 9
NO BLEEDER RESISTOR & NO GROUND CHOKE
BLEEDER RESISTOR (1/4 W, 1M)
BLEEDER RESISTOR (1/2 W, 1M)
BLEEDER RESISTOR (1/4 W, 1M) & GROUND CHOKE
BLEEDER RESISTOR (1/2 W, 1M) & GROUND CHOKE
GROUND CHOKE (100µH)
COMPONENT LOCATIONS: = 1
= 2✢
= 3✢
= 1M
= 2M✢
STANDARD TYPE
WITH C(X) & C(Y) BEHIND L
WITHOUT C(X); C(Y) ONLY
WITHOUT C(Y); C(X) ONLY
WITHOUT C(Y); C(X) BEHIND L
ATTENUATION CODE TABLE:
Non-Medical applications, select Attenuation code with corresponding component values from the table.
= A
= B
= C
= D
= E
= F
= G
= H
= I
= J
= K
= M1
= M2
= M3
= M4
= M5
= M6
= M7
= M8
= M9
TYPE OF MOUNTING: =BLANK
= T
= S
FLANGE MOUNT
SNAP-IN TABS - TOP BOTTOM
SNAP-IN TABS - SIDE
CX
LOAD
L mH
L mH
Cy
L
L'
N'
G'
Cy
R
LINE
L
NFuse
Fuse
GLg
CX
L mH
L mH
L
LOAD
Cy L'
N'
G'
Cy
LINE
L
NFuse
Fuse
GLg
R
LOAD
L mH
L mH
Cy
L
L'
N'
G'
Cy
LINE
L
NFuse
Fuse
GLg
R
CX
LOAD
L mH
L mH
L
L'
N'
R
LINE
L
NFuse
Fuse
GLg
G'
CX
L mH
L mH
L
LOAD
L'
N'
G'
LINE
L
NFuse
Fuse
GLg
R
2M
1M
Cap C(x) 1A (mH) 2A (mH) 3A (mH) 4A (mH) 6A (mH) 8A (mH) 10A (mH)
0.1µF 6.5 3.8 2.5 1.6 0.8 1.05 0.2
0.015µF 1.9 1.5 1.1 0.8 0.6 * 0.3
0.1µF 3.7 2.7 1.8 1.3 * * 0.3
0.1µF * 4.2 * 1.7 * * *
0.047µF 4.6 3.4 2.5 1.4 0.9 * 0.3
0.033µF 9.5 4.3 1.8 1.2 0.85 * 0.3
0.22µF 6.5 4.0 2.5 2.0 0.8 1.05 0.3
0.047µF 10.5 4.0 1.2 0.9 0.53 * *
0.033µF 5.0 3.7 * 1.1 0.6 * 0.2
Medical applications, select Attenuation code with corresponding component values from the table.
Cap C(x) Cap C(y) 1A (mH) 2A (mH) 3A (mH) 4A (mH) 6A (mH) 8A (mH) 10A (mH)
0.1µF 2200pF 6.5 3.8 2.5 1.6 0.8 1.05 0.2
0.015µF 3300pF 1.9 1.5 1.1 0.8 0.6 * 0.3
0.1µF 3300pF 3.7 2.7 1.8 1.3 0.8 1.05 0.3
0.1µF 1000pF 10.5 4.2 2.5 1.7 1.05 * 0.3
0.047µF 3300pF 4.6 3.4 2.5 1.4 0.9 * 0.3
0.033µF 3300pF 9.5 4.3 1.8 1.2 0.85 * 0.3
0.22µF 2200pF 6.5 4.0 2.5 2.0 0.85 1.05 0.3
0.22µF 3300pF 6.5 4.0 2.5 2.0 0.85 1.05 0.3
0.047µF 2200pF 10.5 4.0 1.2 0.9 0.53 * 0.3
0.033µF 2200pF 5 3.7 1.8 1.1 0.6 * 0.2
* * 10.5 6.5 2.5 2.7 1.05 * 0.3
✢Contact PDI for attenuation numbers
✝Flange mount only
*Contact PDI for availability
- -
01 Q 1 5 1
HGN-365A
71
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076
e-mail: filtersales@powerdynamics.com •
www.powerdynamics.com
HGN-365A Series Example & Ordering Code
Medical ApplicationsNon-Medical Applications
Current
Rating
1A
2A
3A
4A
6A
8A
10A
1A
2A
3A
4A
6A
10A
1A
2A
3A
4A
6A
8A
10A
1A
2A
3A
4A
6A
10A
1A
2A
3A
4A
6A
10A
1A
2A
3A
4A
6A
10A
1A
2A
3A
4A
6A
8A
10A
1A
2A
3A
4A
6A
8A
10A
1A
2A
3A
4A
6A
10A
1A
2A
3A
4A
6A
10A
1A
2A
3A
4A
6A
10A
Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz
.15 .5 1 5 10 30 .15 .5 1 5 10 30
34 38 40 32 26 11 8 25 37 71 62 12
29 32 55 48 49 51 8 23 34 68 64 14
28 36 39 45 48 39 8 19 27 58 65 15
22 27 30 48 54 47 8 19 28 66 72 34
18 24 28 44 50 47 8 18 26 43 51 31
20 26 30 44 47 40 8 18 24 65 59 22
8 14 18 33 41 39 8 18 25 29 38 31
25 31 33 30 25 14 1 4 12 50 64 16
24 28 20 53 54 55 1 4 13 53 57 16
19 22 24 27 27 22 1 3 8 48 59 31
23 27 32 54 49 42 1 4 8 40 52 25
15 24 30 44 52 40 1 4 8 36 52 28
11 18 23 39 49 37 1 4 8 26 46 24
29 33 47 53 57 41 8 23 35 73 58 14
28 37 44 52 56 41 8 19 27 74 59 17
25 33 46 53 57 44 8 19 29 63 62 13
19 24 27 43 53 38 8 18 25 57 60 32
19 29 36 49 55 46 8 18 23 50 54 24
20 24 26 27 25 15 8 18 24 58 57 21
11 19 24 41 53 36 8 18 24 51 46 25
36 41 41 49 49 46 8 23 33 62 62 32
36 41 41 49 49 46 8 23 33 62 62 32
28 35 37 41 42 42 8 19 28 56 57 17
19 23 24 40 45 42 8 18 26 50 55 33
21 28 31 41 44 41 8 18 25 45 48 29
12 16 19 45 37 41 8 18 24 52 53 30
32 39 55 55 56 52 3 14 25 75 63 24
29 34 46 56 58 49 3 15 27 67 59 21
28 38 44 51 58 39 3 12 20 66 57 18
20 26 30 51 59 47 3 11 18 49 54 29
18 25 31 49 56 47 3 11 17 55 59 32
11 19 24 40 50 40 3 12 17 48 46 29
40 32 44 52 55 38 2 18 30 66 56 22
32 39 56 56 58 58 1 10 21 76 62 23
23 29 35 53 52 40 1 9 17 66 65 33
20 25 29 50 60 45 1 8 15 53 60 32
19 29 35 51 54 49 2 8 13 47 57 28
11 19 25 40 51 39 2 9 14 46 51 29
37 43 52 47 46 45 17 35 47 65 58 34
36 25 30 54 51 45 16 31 41 51 61 15
28 36 39 46 49 52 15 26 36 58 63 17
24 29 33 45 45 50 15 27 36 59 62 23
18 24 28 42 48 39 15 26 33 48 58 26
20 26 30 45 48 38 15 26 34 45 55 20
10 20 25 38 44 38 15 26 33 33 44 28
37 19 53 51 51 41 17 35 47 68 57 34
38 23 33 57 55 48 15 31 42 59 64 15
28 37 45 48 50 55 15 26 35 64 62 16
25 30 39 47 49 41 15 26 36 61 53 20
18 25 31 45 51 40 15 26 33 51 57 27
20 28 34 51 53 41 15 26 33 50 58 21
10 19 23 35 42 35 15 26 33 36 46 29
38 42 42 25 25 20 4 22 34 59 65 21
32 39 56 56 58 58 1 10 21 76 62 23
20 25 28 44 49 42 3 12 19 61 57 27
18 23 28 44 49 42 3 11 17 50 62 30
14 19 22 39 48 41 3 11 17 48 50 33
11 17 22 36 42 38 3 11 17 39 55 27
32 34 52 44 44 41 1 14 25 60 66 21
29 32 56 49 50 45 1 12 24 67 62 14
23 27 30 49 52 46 1 9 17 59 69 30
19 23 27 44 51 42 1 8 15 67 58 33
16 20 24 42 51 42 1 8 14 58 52 33
11 17 22 36 41 40 2 8 14 37 54 27
36 42 43 37 31 36 1 2 5 17 23 33
30 37 39 29 22 27 1 1 3 14 21 13
28 35 37 28 22 31 1 1 2 11 18 12
28 35 37 28 22 26 1 1 1 11 17 10
21 29 32 31 27 17 1 1 1 7 12 23
11 16 18 18 17 14 1 1 1 5 13 9
Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz
.15 .5 1 5 10 30 .15 .5 1 5 10 30
34 38 39 32 16 21 9 26 37 62 51 11
29 32 34 30 19 16 8 23 34 60 48 13
28 35 37 28 22 19 8 19 28 52 44 12
22 26 27 30 30 28 8 20 29 57 52 33
18 22 24 27 25 18 8 18 26 52 45 27
20 24 26 27 25 14 8 18 26 43 40 17
8 13 15 17 16 14 8 18 25 32 28 24
25 31 33 30 24 21 1 5 14 41 46 17
23 27 28 29 24 23 1 5 14 45 58 15
19 22 24 27 27 20 1 4 10 39 50 34
19 26 29 28 25 15 1 4 9 32 42 25
15 21 24 23 21 17 1 4 9 30 49 28
11 16 18 17 16 12 1 4 8 26 45 24
29 33 34 30 20 16 8 24 35 58 45 15
28 35 37 28 22 24 8 20 29 61 48 15
25 33 58 51 56 41 8 20 30 57 47 13
19 23 24 27 27 21 8 19 27 47 45 30
11 16 18 18 16 12 8 18 24 47 36 24
31 37 39 35 29 22 8 22 32 66 55 22
19 23 24 27 27 22 8 19 27 50 47 30
32 37 40 35 29 23 3 15 25 74 58 21
29 33 34 30 16 21 3 16 27 57 50 20
28 35 37 28 22 23 3 13 22 59 48 16
20 24 25 28 28 21 3 12 20 43 44 27
18 23 25 27 26 20 3 12 19 48 49 30
11 16 18 18 17 14 3 11 17 42 38 27
37 41 41 25 41 17 2 19 31 62 46 21
32 37 40 36 30 22 1 11 22 63 59 24
23 27 28 31 30 30 1 10 19 61 52 32
19 23 24 27 27 20 1 9 17 44 47 31
19 26 29 29 25 17 1 8 15 39 45 25
11 16 18 18 17 14 2 8 14 42 34 25
37 44 41 23 31 18 17 35 47 54 42 32
32 42 42 32 20 17 16 31 42 53 47 14
28 34 36 29 23 22 15 27 37 52 49 13
24 28 29 26 19 10 15 27 38 52 45 19
15 22 24 25 23 19 15 26 35 43 41 23
20 24 26 27 25 13 15 26 36 38 37 18
10 18 20 20 18 13 15 26 34 34 31 23
38 42 42 25 44 17 4 22 33 52 42 20
31 37 40 36 29 25 3 15 25 80 60 25
20 24 25 26 24 23 20 24 25 26 24 23
18 22 24 27 25 18 3 11 18 48 48 28
14 17 19 22 22 19 3 11 18 43 35 29
32 36 37 28 19 11 1 14 26 53 42 16
29 33 34 31 20 17 1 13 24 61 50 14
19 22 24 27 27 18 1 8 16 55 42 32
16 19 21 24 24 21 2 8 15 56 38 33
11 16 18 18 17 14 2 8 14 41 34 25
Current
Rating
1A
2A
3A
4A
6A
8A
10A
1A
2A
3A
4A
6A
10A
1A
2A
3A
4A
10A
2A
4A
1A
2A
3A
4A
6A
10A
1A
2A
3A
4A
6A
10A
1A
2A
3A
4A
6A
8A
10A
1A
2A
3A
4A
6A
1A
2A
4A
6A
10A
Attenuation
Code
M1
M2
M3
M4
M5
M6
M7
M8
M9
Attenuation
Code
A
B
C
D
E
F
G
H
I
J
K
❖
This table applies to schematic 1 only.
Visit our website or contact PDI for other schematic attenuation numbers.
✧
This table applies to schematic 1M only.
Visit our website or contact PDI for other schematic attenuation numbers.
❖✧
Insertion loss in dB (50 Ohm circuit) Insertion loss in dB (50 Ohm circuit)
72
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076
e-mail: filtersales@powerdynamics.com •
www.powerdynamics.com