048 RML www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Radial Miniature Long Life FEATURES * Very long useful life: 3000 h to 4000 h at 105 C * High reliability * Miniaturized, high CV-product per unit volume * Charge and discharge proof * Polarized aluminum electrolytic capacitors, non-solid electrolyte * Radial leads, cylindrical aluminum case with pressure relief, insulated with a blue sleeve 116 RLL lower CV-values 152 RMH * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 high voltage APPLICATIONS 048 RML longer life lower Z 136 RVI miniaturized * EDP, telecommunication, industrial, automotive, and audio-video 150 RMI miniaturized * Smoothing, filtering, buffering in SMPS, timing * Portable and mobile equipment (small size, low mass) 148 RUS Fig. 1 MARKING The capacitors are marked (where possible) with the following information: QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (O D x L in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 105 C Useful life at 105 C Case O D = 10 mm and 12.5 mm Case O D = 16 mm and 18 mm Useful life at 40 C, 1.6 x IR applied Case O D = 10 mm and 12.5 mm Case O D = 16 mm and 18 mm Shelf life at 0 V, 105 C Based on sectional specification Climatic category IEC 60068 VALUE 10 x 12 to 18 x 35 100 F to 10 000 F 20 % 6.3 to 63 V -40 C to +105 C 2000 h * Rated capacitance (in F) * Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for 20 %) * Rated voltage (in V) * Date code, in accordance with IEC 60062 * Code indicating factory of origin * Name of manufacturer 3000 h 4000 h * Upper category temperature (105 C) 200 000 h 260 000 h 1000 h IEC 60384-4 / EN130300 40 / 105 / 56 * Negative terminal identification * Series number (048) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (O D x L in mm) CR (F) 100 220 330 470 1000 2200 3300 4700 6800 10 000 UR (V) 6.3 16 x 25 16 x 35 Revision: 28-Feb-17 10 10 x 16 12.5 x 20 12.5 x 25 16 x 25 16 x 31 18 x 35 16 10 x 12 10 x 20 12.5 x 25 16 x 25 16 x 31 16 x 35 18 x 35 25 10 x 16 12.5 x 20 16 x 25 16 x 31 18 x 35 - 35 10 x 12 10 x 20 12.5 x 25 16 x 31 18 x 35 18 x 35 - 40 16 x 35 18 x 35 - 50 10 x 16 12.5 x 20 16 x 25 18 x 35 18 x 35 - 63 10 x 12 10 x 20 12.5 x 20 12.5 x 25 16 x 31 18 x 35 - Document Number: 28318 1 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 048 RML www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS OD OD L L F 15 min. +1 4 0 Od Od 5 min. F Fig. 2 - Form CA: Longs leads Fig. 3 - Form CB: Cut leads Fig. 4 - Form TFA: Taped in box (ammopack) Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ODxL CASE CODE Od O Dmax. Lmax. F MASS (g) FORM CA FORM CB FORM TFA 10 x 12 14 0.6 10.5 13.5 5.0 0.5 1.6 1000 500 800 PACKAGING QUANTITIES 10 x 16 15 0.6 10.5 17.5 5.0 0.5 1.9 500 500 800 10 x 20 16 0.6 10.5 22.0 5.0 0.5 2.2 500 500 800 12.5 x 20 17 0.6 13.0 22.0 5.0 0.5 4.0 500 500 500 12.5 x 25 18 0.6 13.0 27.0 5.0 0.5 5.0 250 250 500 16 x 25 19 0.8 16.5 27.0 7.5 0.5 8.0 250 250 250 16 x 31 20 0.8 16.5 33.5 7.5 0.5 9.0 100 100 250 16 x 35 21 0.8 16.5 37.5 7.5 0.5 11.5 100 100 - 18 x 35 22 0.8 18.5 37.5 7.5 0.5 14.5 100 100 - Note * For detailed tape dimensions please refer to packaging information: www.vishay.com/doc?28360 Revision: 28-Feb-17 Document Number: 28318 2 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 048 RML www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL CR IR IL1 tan Z Electrolytic capacitor 048 series DESCRIPTION Rated capacitance at 100 Hz, tolerance 20 % Rated RMS ripple current at 100 Hz, 105 C Max. leakage current after 1 min at UR Max. dissipation factor at 100 Hz Max. impedance at 100 kHz 2200 F / 16 V; 20 % Nominal case size: O 12.5 mm x 25 mm; Form TFA Ordering code: MAL204835222E3 Former 12NC: 2222 048 35222 Note * Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 35 40 50 63 ORDERING NUMBER MAL2048....... CR 100 Hz (F) DIMENSIONS ODxL (mm) IR 100 Hz 105 C (mA) IL1 1 min (A) tan 100 Hz Z 100 kHz (m) FREQ. CODE (1) 6800 10 000 1000 2200 3300 4700 6800 10 000 470 1000 2200 3300 4700 6800 10 000 470 1000 2200 3300 4700 220 470 1000 2200 3300 4700 2200 3300 220 470 1000 2200 3300 100 220 330 470 1000 2200 16 x 25 16 x 35 10 x 16 12.5 x 20 12.5 x 25 16 x 25 16 x 31 18 x 35 10 x 12 10 x 20 12.5 x 25 16 x 25 16 x 31 16 x 35 18 x 35 10 x 16 12.5 x 20 16 x 25 16 x 31 18 x 35 10 x 12 10 x 20 12.5 x 25 16 x 31 18 x 35 18 x 35 16 x 35 18 x 35 10 x 16 12.5 x 20 16 x 25 18 x 35 18 x 35 10 x 12 10 x 20 12.5 x 20 12.5 x 25 16 x 31 18 x 35 1350 1700 470 800 1000 1270 1550 1870 360 600 1000 1220 1500 1690 1980 440 720 1120 1450 1720 310 500 900 1340 1600 1950 1500 1600 340 620 1030 1500 1900 240 400 550 700 1150 1600 430 630 100 220 330 470 680 1000 78 160 360 530 760 1100 1600 120 250 550 830 1200 80 170 350 770 1200 1600 880 1300 110 240 500 1100 1700 66 140 210 300 630 1400 0.32 0.40 0.19 0.21 0.23 0.25 0.29 0.37 0.16 0.16 0.18 0.20 0.22 0.26 0.34 0.14 0.14 0.16 0.18 0.20 0.12 0.12 0.12 0.14 0.16 0.18 0.13 0.15 0.10 0.10 0.10 0.12 0.14 0.09 0.09 0.09 0.09 0.09 0.11 56 42 180 90 68 56 45 36 250 140 70 56 45 42 34 180 100 56 45 36 280 150 75 45 36 34 45 36 250 110 60 50 40 310 200 120 80 49 45 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF1 MF2 MF2 MF2 MF2 MF2 MF2 MF2 MF2 MF3 MF3 MF3 MF3 MF3 MF3 MF3 MF3 MF3 MF3 MF3 BULK PACKAGING TAPED FORM CA FORM CB FORM TFA 53682E3 53103E3 54102E3 54222E3 54332E3 54472E3 54682E3 54103E3 55471E3 55102E3 55222E3 55332E3 55472E3 55682E3 55103E3 56471E3 56102E3 56222E3 56332E3 56472E3 50221E3 50471E3 50102E3 50222E3 50332E3 50472E3 57222E3 57332E3 51221E3 51471E3 51102E3 51222E3 51332E3 58101E3 58221E3 58331E3 58471E3 58102E3 58222E3 63682E3 63103E3 64102E3 64222E3 64332E3 64472E3 64682E3 64103E3 65471E3 65102E3 65222E3 65332E3 65472E3 65682E3 65103E3 66471E3 66102E3 66222E3 66332E3 66472E3 60221E3 60471E3 60102E3 60222E3 60332E3 60472E3 67222E3 67332E3 61221E3 61471E3 61102E3 61222E3 61332E3 68101E3 68221E3 68331E3 68471E3 68102E3 68222E3 33682E3 34102E3 34222E3 34332E3 34472E3 34682E3 35471E3 35102E3 35222E3 35332E3 35472E3 36471E3 36102E3 36222E3 36332E3 30221E3 30471E3 30102E3 30222E3 31221E3 31471E3 31102E3 38101E3 38221E3 38331E3 38471E3 38102E3 - Note (1) Determines the applicable row in the table "Multiplier of Ripple Current (I ) as a Function of Frequency" R Revision: 28-Feb-17 Document Number: 28318 3 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 048 RML www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER Voltage Surge voltage Reverse voltage Current CONDITIONS VALUE Us 1.15 UR Urev 1 V After 1 min at UR After 5 min at UR IL1 0.01 CR x UR + 3 A IL5 0.002 CR x UR + 3 A Case O D = 10 mm Case O D 12.5 mm Typ. 16 nH Typ. 18 nH Calculated from tan max. and CR (see Table 2) ESR = tan /2f CR Leakage current Inductance Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) CAPACITANCE (C) 1.2 C C0 1.2 C C0 1.0 1 1.1 5 4 3 2 1 2 0.8 1.0 0.6 2 0.4 Curve 1: 10 V Curve 2: 16 V Curve 3: 25 V Curve 4: 50 V Curve 5: 63 V 0.9 1 Curve 1: 6.3 V Curve 2: 63 V 0.2 0.8 0 - 60 - 40 - 20 0 20 40 60 80 C0 = Capacitance at 20 C, 100 Hz 100 120 Tamb (20 C) 10 102 C0 = Capacitance at 20 C, 100 Hz Fig. 5 - Typical multiplier of capacitance as a function of ambient temperature 103 105 104 f (Hz) Fig. 6 - Typical multiplier of capacitance as a function of frequency EQUIVALENT SERIES RESISTANCE (ESR) 1.2 C C0 1.0 2.0 ESR 1 2 3 Curve 1: 6.3 V Curve 2: 16 V Curve 3: 35 V Curve 4: 50 V Curve 5: 63 V ESR0 1.6 0.8 1.2 0.6 3 2 1 0.8 1 2 3 4 5 0.4 0.4 Curve 1: 10 V; case O D = 10 mm Curve 2: 6.3 V; case O D = 16 mm Curve 3: 63 V; case O D = 18 mm 0.2 0 0 - 60 - 40 - 20 0 20 40 60 80 C0 = Capacitance at 20 C, 100 Hz Fig. 7 - Typical multiplier of ESR as a function of ambient temperature Revision: 28-Feb-17 100 120 Tamb (20 C) 10 102 103 104 ESR0 = Typical at 20 C, 100 Hz 105 f (Hz) Fig. 8 - Typical multiplier of ESR as a function of frequency Document Number: 28318 4 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 048 RML www.vishay.com Vishay BCcomponents IMPEDANCE (Z) 102 102 Curve 1: Case O D = 10 mm Curve 2: Case O D = 16 mm Z Z0 Curve 1: 470 F, 16 V; O D = 10 x 12 mm Curve 2: 1000 F, 10 V; O D = 10 x 16 mm Curve 3: 1000 F, 16 V; O D = 10 x 20 mm Curve 4: 2200 F, 16 V; O D = 12.5 x 25 mm Curve 5: 3300 F, 16 V; O D = 16 x 25 mm Curve 6: 6800 F, 6.3 V; O D = 16 x 25 mm Z () 10 1 10 2 1 1 2 3 4 5 6 1 1 2 10 -1 10 -1 10-2 - 60 - 40 - 20 0 20 40 60 80 Z0 = Typical impedance at 20 C, 10 kHz 100 120 10 10 104 f (Hz) 105 Tamb (20 C) Fig. 10 - Typical impedance as a function of frequency Curve 1: 220 F, 35 V; O D = 10 x 12 mm Curve 2: 330 F, 35 V; O D = 10 x 16 mm Curve 3: 470 F, 25 V; O D = 10 x 16 mm Curve 4: 470 F, 35 V; O D = 10 x 20 mm Curve 5: 1000 F, 25 V; O D = 12.5 x 20 mm Curve 6: 1000 F, 35 V; O D = 12.5 x 25 mm Curve 7: 3300 F, 25 V; O D = 16 x 31 mm Z () 103 Tamb (20 C) Fig. 9 - Typical multiplier of impedance as a function of ambient temperature 102 102 1 102 Curve 1: 100 F, 63 V; O D = 10 x 12 mm Curve 2: 220 F, 50 V; O D = 10 x 16 mm Curve 3: 220 F, 63 V; O D = 10 x 20 mm Curve 4: 330 F, 63 V; O D = 12.5 x 20 mm Curve 5: 470 F, 50 V; O D = 12.5 x 20 mm Curve 6: 470 F, 63 V; O D = 12.5 x 25 mm Z () 10 1 1 2 3 4 5 6 7 -1 10 -1 10 10-2 10-2 10 102 103 104 f (Hz) 105 Tamb (20 C) Fig. 11 - Typical impedance as a function of frequency Revision: 28-Feb-17 Curve 7: 1000 F, 63 V; O D = 16 x 31 mm Curve 8: 1000 F, 40 V; O D = 16 x 35 mm 10 102 103 3 4 5 6 7 8 104 1 2 f (Hz) 105 Tamb (20 C) Fig. 12 - Typical impedance as a function of frequency Document Number: 28318 5 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 048 RML www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE Table 3 ENDURANCE TEST DURATION AND USEFUL LIFE NOMINAL CASE SIZE ODxL (mm) ENDURANCE AT 105 C (h) USEFUL LIFE AT 105 C (h) 10 x 12 2000 3000 10 x 16 2000 3000 10 x 20 2000 3000 12.5 x 20 2000 3000 12.5 x 25 2000 3000 16 x 25 2000 4000 16 x 31 2000 4000 16 x 35 2000 4000 18 x 35 2000 4000 Note * Multiplier of useful life code: CCC206 CCC206 3.8 3.7 IA IR 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 Lifetime multiplier 2.6 0 1. 2.4 5 1. 0 2. 2.2 0 3. 0 4. 2.0 0 6. 0 8. 1.8 12 1.6 20 60 1.2 1.0 0.8 0.5 0.0 (1) 0 10 0 15 0 20 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz, 105 C (1) Useful life at 105 C and IR applied (see Table 4) 30 1.4 40 50 60 70 80 90 100 110 Tamb (C) Fig. 13 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 28-Feb-17 Document Number: 28318 6 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 048 RML www.vishay.com Vishay BCcomponents Table 4 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) FREQ. CODE 50 100 300 MF1 0.95 1.00 1.07 MF2 0.85 1.00 MF3 0.80 1.00 3000 100 000 1.12 1.15 1.20 1.20 1.30 1.35 1.40 1.25 1.40 1.50 1.60 1000 IR MULTIPLIER TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4 / EN130300 subclause 4.13 PROCEDURE (quick reference) REQUIREMENTS Tamb = 105 C; UR applied; 2000 h UR 6.3 V; C/C: +15 % / -30 % UR 6.3 V; C/C: 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 105 C; UR and IR applied; Case O D = 10 mm and 12.5 mm: 3000 h Case O D = 16 mm and 18 mm: 4000 h UR 6.3 V; C/C: +45 % / -50 % UR 6.3 V; C/C: 45 % tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit No short or open circuit Total failure percentage: 1 % Shelf life (storage at high temperature) IEC 60384-4 / EN130300 subclause 4.17 Tamb = 105 C; no voltage applied; 1000 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement UR 6.3 V; C/C: +15 % / -30 % UR 6.3 V; C/C: 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL5 2 x spec. limit Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 28-Feb-17 Document Number: 28318 7 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000