RE (ARE) 2.6 GHz SMALL MICROWAVE RELAYS RE RELAYS (ARE) FEATURES 20.2 .795 11.2 .441 * Excellent high frequency characteristics (to 2.6GHz) 8.9 .350 Type 20.2 .795 11.2 .441 9.6 .378 mm inch RoHS Directive compatibility information http://www.nais-e.com/ Impedance 50 Impedance 75 Frequency V.S.W.R. (Max.) Insertion loss (dB, Max.) Isolation (dB, Min.) V.S.W.R. (Max.) Insertion loss (dB, Max.) Isolation (dB, Min.) 900MHz 2.6GHz 1.3 1.7 0.2 0.7 60 30 1.2 1.5 0.2 0.5 60 30 * Compact and slim size Size: 20.2(L) x 11.2(W) x 8.9(H)* mm .795(L) x .441(W) x .350(H) inch *Surface-mount terminal is 9.6 mm .378 inch size. TYPICAL APPLICATIONS 1. Broadcasting and video markets. * Digital broadcasting market * STB/tuner market, etc. 2. Communications market * Antennae switching * All types of wireless devices * Surface-mount type also available SPECIFICATIONS Contact Coil (at 20C, 68F) Arrangement Contact material Initial contact resistance (By voltage drop 10V DC 10mA) 1 Form C Gold Max. 100m Contact rating Rating Contact carrying power Max. switching voltage Max. switching current High frequency V.S.W.R. characteristics (Impedance Insertion loss 75) (Initial) Isolation High frequency V.S.W.R. characteristics (Impedance Insertion loss 50) (Initial) Isolation Expected life (min. operations) Mechanical (at 180 cpm) 1W, 2.6GHz, [Impedance 75, V.S.W.R. & 1.5] Electri- [Impedance 50, V.S.W.R. & 1.7] cal 10mA 24V DC (resistive load) (at 20cpm) 1W (at 2.6 GHz [Impedance 75 , V.S.W.R. Max.1.5] [Impedance 50 , V.S.W.R. Max.1.7]) 10mA 24V DC (resistive load) 10W (at 2.6GHz [Impedance 75 , V.S.W.R. Max.1.5] [Impedance 50 , V.S.W.R. Max.1.7]) 30 V DC 0.5 A DC Max. 1.2 (to 900MHz) Max. 1.5 (to 2.6GHz) Max. 0.2dB (to 900MHz) Max. 0.5dB (to 2.6GHz) Min. 60dB (to 900MHz) Min. 30dB (to 2.6GHz) Max. 1.3 (to 900MHz) Max. 1.7 (to 2.6GHz) Max. 0.2dB (to 900MHz) Max. 0.7dB (to 2.6GHz) Min. 60dB (to 900MHz) Min. 30dB (to 2.6GHz) 106 Nominal operating power 200 mW Characteristics Initial insulation resistance*1 Between open contacts Initial Between contact and coil breakdown Between contact and voltage*2 ground terminal Operate time*3 (at 20C) Release time (without diode)*3 (at 20C) Temperature rise (at 20C)*4 Functional*5 Shock resistance Destructive*6 Functional*7 Vibration resistance Destructive Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature) Unit weight Ambient temp. Humidity Min. 100 M (at 500 V DC) 500 Vrms 1,000 Vrms 500 Vrms Max. 10ms Max. 5ms Max. 60C Min. 500 m/s2{50 G} Min. 1,000 m/s2{100 G} 10 to 55 Hz at double amplitude of 3 mm 10 to 55 Hz at double amplitude of 5 mm -40C to 70C -40F to 158F 5 to 85% R.H. Approx. 5 g .18 oz Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section. *2 Detection current: 10mA *3 Nominal operating voltage applied to the coil, excluding contact bounce time. *4 By resistive method, nominal voltage applied to the coil: Contact carrying power: 10W, at 2.6GHz, [Impedance 75, V.S.W.R. & 1.5] [Impedance 50, V.S.W.R. & 1.7] 5 * Half-wave pulse of sine wave: 11ms, detection time: 10s. 6 * Half-wave pulse of sine wave: 6ms *7 Detection time: 10s *8 Refer to 5. Conditions for operation, transport and storage conditions in NOTES 3x105 3x105 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. RE (ARE) ORDERING INFORMATION Ex. ARE 1 Contact arrangement Operating function Terminal shape 1: 1 Form C 0: Single side stable type (Impedance 50) 3: Single side stable type (Impedance 75) Nil: Standard PC board terminal A: Surface-mount terminal Coil voltage (DC) 03: 4H: 06: 09: 12: 24: 3V 4.5 V 6V 9V 12 V 24 V Packing style Nil: Carton packing (Standard PC board terminal only) Tube packing (Surface-mount terminal only) Z: Tape and reel packing (picked from 12/13/14 pin side) Note: Tape and reel packing symbol "-Z" is not marked on the relay. "X type tape and reel packing (picked from 8/9/10/11/12/13/14-pin side) is also available. Suffix "X" instead of "Z". TYPES AND COIL DATA (at 20C 68F) * Single side stable type (Impedance 50) * Packing of standard PC board terminal: 50 pcs. in an inner package (carton); 500 pcs. in an outer package. * Packing of surface-mount terminal: 25 pcs. in an inner package (tube); 200 pcs. in an outer package. * Packing of surface-mount terminal: 400 pcs. in an inner package (tape and reel); 800 pcs. in an outer package. Standard PC board terminal ARE1003 ARE104H ARE1006 ARE1009 ARE1012 ARE1024 Surface-mount terminal ARE10A03 ARE10A4H ARE10A06 ARE10A09 ARE10A12 ARE10A24 Nominal voltage, V DC 3 4.5 6 9 12 24 Pick-up voltage, V DC (max.) (initial) 2.25 3.375 4.5 6.75 9 18 Drop-out voltage, V DC (min.)(initial) 0.3 0.45 0.6 0.9 1.2 2.4 Coil resistance, (10%) 45 101 180 405 720 2,880 Nominal operating current, mA (10%) 66.7 44.4 33.3 22.2 16.7 8.3 Nominal operating power, mW 200 200 200 200 200 200 Max. allowable voltage, V DC (at 60C) 3.3 4.95 6.6 9.9 13.2 26.4 * Single side stable type (Impedance 75) * Packing of standard PC board terminal: 50 pcs. in an inner package (carton); 500 pcs. in an outer package. * Packing of surface-mount terminal: 25 pcs. in an inner package (tube); 200 pcs. in an outer package. * Packing of surface-mount terminal: 400 pcs. in an inner package (tape and reel); 800 pcs. in an outer package. Standard PC board terminal ARE1303 ARE134H ARE1306 ARE1309 ARE1312 ARE1324 Surface-mount terminal ARE13A03 ARE13A4H ARE13A06 ARE13A09 ARE13A12 ARE13A24 Nominal voltage, V DC 3 4.5 6 9 12 24 Pick-up voltage, V DC (max.) (initial) 2.25 3.375 4.5 6.75 9 18 Drop-out voltage, V DC (min.)(initial) 0.3 0.45 0.6 0.9 1.2 2.4 Coil resistance, (10%) 45 101 180 405 720 2,880 Nominal operating current, mA (10%) 66.7 44.4 33.3 22.2 16.7 8.3 Nominal operating power, mW 200 200 200 200 200 200 Max. allowable voltage, V DC (at 60C) 3.3 4.95 6.6 9.9 13.2 26.4 DIMENSIONS mm inch 1. Standard PC board terminal (75, 50 type) Schematic (Bottom view) 20.2 .795 1 Stand off 11.2 .441 7 14 13 12 11 10 9 8 Direction indication NC COM (Deenergized condition) 8.6 .339 3.0 .118 0.3 .012 2.54 .100 0.5 .020 0.3 .012 (1.49) (.059) 7.62 .300 0.3 .012 (2.09) (.082) General tolerance: 0.3 .012 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. NO RE (ARE) 2. Surface mount terminal * 75 type mm inch Schematic (Top view) 20.2 .795 (0.7) (.028) NC 13.2 0.5 .520 .020 COM NO 14 13 12 11 10 9 8 11.2 .441 1 Direction indication (1.3) (.511) 7 (Deenergized condition) 0.3 .012 8.6 .339 0.3 .012 9.6 .378 0.3 .012 2.54 .100 (1.49) (.059) 0.5 .020 7.62 .300 (2.09) (.082) General tolerance: 0.3 .012 * 50 type 0.5 .020 4.12 .162 1.04 .041 (0.7) (.028) Schematic (Top view) 20.2 .795 14.74 .580 3.5 .138 1.04 .041 0.5 .020 0.5 .020 4.12 .162 1.04 .041 NC COM NO 14 13 12 11 10 9 8 1.04 .041 Direction indication 7 1 (Deenergized condition) 13.2 0.5 11.2 .520 .020 .441 (1.3) (.511) 8.6 .339 0.3 .012 0.3 .012 (1.49) (.059) 0.3 .012 7.62 .300 9.6 .378 (2.09) (.082) General tolerance: 0.3 .012 REFERENCE DATA 1-(1). High frequency characteristics (Impedance 75) (Standard PC board terminal) * Insertion loss characteristics * Isolation characteristics 2.0 0 0 1.9 0.1 10 1.8 0.2 1.6 1.5 COM-NO 1.4 1.3 20 0.3 0.4 0.5 0.6 COM-NC 3GHz 900MHz Frequency 0.9 1.0 40 50 COM-NO 70 COM-NO 0.8 1.1 COM-NC 30 60 0.7 1.2 1 COM-NC Isolation, dB 1.7 Insertion loss, dB V.S.W.R. * V.S.W.R. characteristics 80 90 3GHz 900MHz Frequency All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. 100 900MHz 3GHz Frequency RE (ARE) 1-(2). High frequency characteristics (Impedance 50) (Standard PC board terminal) * Insertion loss characteristics * Isolation characteristics 0 0 1.9 0.1 10 1.8 0.2 COM-NO 1.6 1.5 1.4 COM-NC 1.3 COM-NC 0.3 0.4 0.5 0.6 0.9 1 1.0 3GHz 40 50 70 COM-NO 0.8 1.1 COM-NC 30 60 0.7 1.2 900MHz 20 Isolation, dB 1.7 Insertion loss, dB V.S.W.R. * V.S.W.R. characteristics COM-NO 80 90 900MHz 3GHz 100 900MHz Frequency Frequency 3GHz Frequency NOTES Temperature Time 120C 248F or less Within 2 minute Soldering should be done at 2605C 5005F within 6 s. 2) In case of automatic soldering, the following conditions should be observed (Surface-mount terminal) (1) Position of measuring temperature 1.0mm .039inch B (2) IR (infrared reflow) soldering method A: B: T5 T4 T3 T2 T1 t1 t2 t3 t4 t5 T1=150C 302F T2=160C 320F T3=183C 361F T4=245C 473F T5=270C 518F t2 - t1 = 80 to 120 s t5 - t3 = 30 to 40 s t4 = 170 to 190 s Temperature rise of relay itself may vary according to the mounting level or the heating method of reflow equipment. Therefore, please set the temperature of soldering portion of relay terminal and the top surface of the relay case not to exceed the above mentioned soldering condition. It is recommended to check the temperature rise of each portion under actual mounting condition before use. 4. Packing style 1) Tape dimensions +0.1 +.004 .059-0 dia. 1.5-0 Relay polarity bar 4 .157 1.7 .067 R0.75 RE Relay 20.0 .030 .787 1.5 .059 Tape coming out direction 2.00.15 .079.006 1.75 .069 20.2 440.3 .012 20.75.795 1.732 .817 40.4 1.591 13.85 .545 +0.2 10.6-0.3 +.008 .417-.012 2) Dimensions of plastic reel 210.8 dia. .827.031 dia. A 800.1 3.150.004 130.2 dia. .512.008 dia. A: Surface of PC board where relay is mounted. B: Above the PC board surface. 0.4 .016 2.00.5 .079.020 +0.2 44.4-0 +.008 1.748-0 Max. 50.5 1.988 3800.2 .008 14.961 5. Conditions for operation, transport and storage conditions 1) Ambient temperature, humidity, and atmospheric pressure during usage, transport, and storage of the relay: (1) Temperature: -40 to +70C -40 to +158F (2) Humidity: 5 to 85% RH (Avoid freezing and condensation.) The humidity range varies with the temperature. Use within the range indicated in the graph below. (3) Atmospheric pressure: 86 to 106 kPa Temperature and humidity range for usage, transport, and storage: Humidity, %RH ;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; 1. Coil operating power Pure DC current should be applied to the coil. The wave form should be rectangular. If it includes ripple, the ripple factor should be less than 5%. However, check it with the actual circuit since the characteristics may be slightly different. 2. Cleaning For automatic cleaning, the boiling method is recommended. Avoid ultrasonic cleaning which subjects the relays to high frequency vibrations, which may cause the contacts to stick. It is recommended that alcoholic solvents be used. 3. Soldering 1) The manual soldering shall be performed under following condition. Max. 260C 500F 10s Max. 350C 662F 3s The affect of the PCB on the relay will differ depending on the type of PCB used. Please verify the type of PCB to be used. Preheat according to the following conditions. 85 Tolerance range (Avoid freezing when used at temperatures lower than 0C 32F 5 -40 -40 (Avoid condensation when used at temperatures higher than 0C 32F 0 +32 Temperature, C F 70 +158 2) Condensation Condensation forms when there is a sudden change in temperature under high temperature and high humidity conditions. Condensation will cause deterioration of the relay insulation. 3) Freezing Condensation or other moisture may freeze on the relay when the temperature is lower than 0C 32F. This causes problems such as sticking of movable parts or operational time lags. 4) Low temperature, low humidity environments The plastic becomes brittle if the relay is exposed to a low temperature, low humidity environment for long periods of time. All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd.