- Small form factor SiP solution, 12mm x 12mm x1.6mm, 100 Pin LGA, 1mm pitch
- Low power consumption and power save mode
- Full support for 802.11 e(QOS) and 802.11i (Security)
- Integrated RF-friendly LDO for single rail operation
- Integrated PA, EEPROM, Balun, and clocking
- Optimized front-end design for receive sensitivity, plus full coexistence support
- Full driver support for popular OSs for the Marvell PXA processor family,
Linux support for many other ARM-9 based processors
- Includes both an SDIO and a GSPI interface for WiFi,
and a USB and UART interface for BT
- RoHS compliant
- 7 GPIOs for WiFi, 2 GPIOs for BT
Copyright 2008, Wi2Wi Inc. Wi2Wi Inc. 2107 N First Street Ste 540, San Jose, CA 95131
USA Tel: +1 408 416 4000 FAX: +1 408 416 4201
www.wi2wi.com
The W2CBW003 is a complete 802.11 b/g plus Bluetooth v2.0 + EDR radio solution
based on the industry standard Marvell 8686 and Cambridge Silicon Radio
architectures. Designed for handheld or portable warehousing/logistics, medical,
consumer and industrial applications, it is a complete WiFi /BTsolution that includes
an LDO for single rail operation, all crystals,all filtering, local memory for MAC
address storage, and diagnostics capability. A full array of certifications have been
performed on this device, making the certification process for the final systems
design much easier and less costly. Full driver support is available for most OSs for
the Marvell PXA family processors, as well as many other ARM-9 based processors
using a Linux OS.
Ordering Information
W2CBW003-TR -WiFi/BT SiP, Tape and Reel
W2CBW003-T - WiFi /BT SiP, Tray
W2CBW003-001: Designates UART BT Int
W2CBW003-SAM - WiFi/BT SiP Sample Pack
W2CBW003-DEV - WiF/BT SiP Evaluation Kit
(Note: please soecify GSPI or SDIO interface
will be used)
Applications
- Warehousing and logistics
handhelds
- Automotive aftermarket
- Medical equipment
- Industrial handhelds
- M2M applications
- POS terminals
- Internet-enabled consumer
devices
- VoFi and other smartphones
- WiFi enabled security cameras
W2CBW003 - 802.11 b/g +Bluetooth
TM
System-in-Package
Features
Copyright 2008, Wi2Wi Inc. Wi2Wi Inc. 2107 N First Street Ste 540, San Jose, CA 95131
USA Tel: +1 408 416 4000 FAX: +1 408 416 4201
www.wi2wi.com
Package Dimensions
- 12mm (L) x 12mm(W) x 1.6mm(H)
W2CBW003 - Specications
Package Type
- 100-pin BGA, 1 mm pitch
Power Ratings
- Supply Voltage : 3.3VDC, regulated to 1.5V
- Peak Current: 275 mA
(continuous transmit, 802.11g and BT)
- IEEE Power Save Mode: 10 mA
- Standby mode (both radios): 30 mA
- Deep Sleep Mode: 2mA
Temperature Range
- Operating: -20˚ C to + 75˚ C
- Storage: -40˚ C to + 85˚ C
- Humidity: 5% to 95%, Non-condensing
Data Rates
-CCK: 1,2,5.5, and 11Mb/s
-OFDM: 6,9,12,18,24,36,48,and 54 Mb/s
- BT v2.0: up to 1Mbps
- BT EDR: 2,3 Mbps
Interfaces - WiFi
- SDIO 1 bit and 4 bit, GSPI
Interfaces - BT
- USB (default) or UART
Transmit Power
- +15dBm typical for both 802.11 b and g
- BT v 2.0: +3dBm, EDR: -1dBm
Security
- WEP,TKIP, WPA and WPA2, AES/CCMP per
802.11 i
Baseband Modulation - WiFi
- 802.11g: OFDM
- 802.11b: DSSS/CCK
Baseband Modulation - BT
- v2.0: GFSK
- Bluetooth EDR: ∏/4 DQPSK,8DPSK
Receiver Sensitivity - BT
- 1 Mb/s @ -84 dBm GFSK
- 2 Mb/s @ -87 dBm ∏/4 DQPSK
- 3 Mb/s @ -80 dBm 8DPSK
Receiver Sensitivity - WiFI
- 54 Mb/s @ -74 dBm OFDM
- 6Mb/s @ -90 dBm OFDM
- 11Mb/s @ -88 dBm CCK
- 1Mb/s @ -90 dBm DSSS
Quality of Service
- 802.11 e EDCF
Host Processors/OS
With Driver Support
- Marvell PXA Family - most OSs
- Freescale i.MX21 and 31 - Linux OS, SDIO
- Samsung SC2443, 2412 - Linux (SDIO), WinCE
WinMobile (GSPI)
- X86 - Vista, XP, and Linux
- Please contact your Wi2Wi sales rep if your
processor is not listed!
