Silizium-PIN-Fotodiode mit Tageslichtsperrfilter Silicon PIN Photodiode with Daylight Filter SFH 235 FA Wesentliche Merkmale Features * * * * * * * * Speziell geeignet fur Anwendungen bei 880 nm Kurze Schaltzeit (typ. 20 ns) 5 mm-Plastikbauform im LED-Gehause Auch gegurtet lieferbar Especially suitable for applications of 880 nm Short switching time (typ. 20 ns) 5 mm LED plastic package Also available on tape and reel Anwendungen Applications * IR-Fernsteuerung von Fernseh- und Rundfunkgeraten, Videorecordern, Lichtdimmern und Geratefernsteuerungen * Lichtschranken fur Gleich- und Wechsellichtbetrieb * IR-remote control of hi-fi and TV sets, video tape recorders, dimmers, remote control of various equipment * Photointerrupters Typ Type Bestellnummer Ordering Code SFH 235 FA Q62702-P273 2000-01-01 1 SFH 235 FA Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ... + 80 C Lottemperatur (Lotstelle 2 mm vom Gehause entfernt bei Lotzeit t 3 s) Soldering temperature in 2 mm distance from case bottom (t 3 s) TS 230 C Sperrspannung Reverse voltage VR 32 V Verlustleistung, TA = 25 C Total power dissipation Ptot 150 mW Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Fotostrom Photocurrent VR = 5 V, Ee = 1 mW/cm2 IP 50 ( 40) A Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity S max 900 nm Spektraler Bereich der Fotoempfindlichkeit 740 ... 1120 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 7 mm2 Abmessung der bestrahlungsempfindlichen Flache Dimensions of radiant sensitive area LxB LxW 2.65 x 2.65 mm x mm Abstand Chipoberflache zu Gehauseoberflache Distance chip front to case surface H 0.6 ... 0.8 mm Halbwinkel Half angle 65 Grad deg. Dunkelstrom, VR = 10 V Dark current IR 2 ( 30) nA Kennwerte (TA = 25 C, = 870 nm) Characteristics S = 10% von Smax Spectral range of sensitivity S = 10% of Smax 2000-01-01 2 SFH 235 FA Kennwerte (TA = 25 C, = 870 nm) Characteristics (cont'd) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Spektrale Fotoempfindlichkeit Spectral sensitivity S 0.63 A/W Quantenausbeute Quantum yield 0.9 Electrons Photon Leerlaufspannung, Ee = 0.5 mW/cm2 Open-circuit voltage VO 320 ( 250) mV Kurzschlustrom, Ee = 0.5 mW/cm2 Short-circuit current ISC 22 A Anstiegs- und Abfallzeit des Fotostromes Rise and fall time of the photocurrent RL = 50 ; VR = 5 V; = 850 nm; Ip = 800 A tr, tf 20 ns Durchlaspannung, IF = 100 mA, E = 0 Forward voltage VF 1.3 V Kapazitat, VR = 0 V, f = 1 MHz, E = 0 Capacitance C0 72 pF Temperaturkoeffizient von VO Temperature coefficient of VO TCV - 2.6 mV/K Temperaturkoeffizient von ISC Temperature coefficient of ISC TCI 0.03 %/K Rauschaquivalente Strahlungsleistung Noise equivalent power VR = 10 V NEP 4.0 x 10- 14 Nachweisgrenze, VR = 10 V Detection limit D* 6.6 x 1012 2000-01-01 3 W -----------Hz cm x Hz -------------------------W SFH 235 FA Relative Spectral Sensitivity Srel = f () Photocurrent IP = f (Ee), VR = 5 V Open-Circuit Voltage VO = f (Ee) OHF01430 100 P Srel % 80 OHF01428 10 3 A 10 4 mV VO 10 2 10 3 70 VO 10 1 10 2 40 OHF00398 160 mW Ptot 140 120 100 60 50 Total Power Dissipation Ptot = f (TA) P 80 60 30 10 0 10 1 40 20 20 10 0 400 600 800 Dark Current IR = f (VR), E = 0 10 1 10 2 W/cm 2 10 0 10 4 OHF00080 OHF00081 100 C pA 0 0 20 40 60 Ee Capacitance C = f (VR), f = 1 MHz, E = 0 4000 R 10 -1 10 0 1000 nm 1200 80 C 100 TA Dark Current IR = f (TA), VR = 10 V, E = 0 OHF00082 10 3 R nA pF 80 10 2 3000 70 60 2000 10 1 50 40 30 10 0 1000 20 10 0 0 5 10 15 V VR 20 0 -2 10 10 -1 10 0 V 10 2 VR Directional Characteristics Srel = f () 2000-01-01 10 1 4 10 -1 0 20 40 60 80 C 100 TA SFH 235 FA Mazeichnung Package Outlines 1.1 (0.043) 0.7 (0.028) 1.2 (0.047) 5.1 (0.201) 4.6 (0.181) 0.75 (0.030) 0.45 (0.018) 0.4 (0.016) 1.8 (0.071) 0.6 (0.024) 2.54 (0.100) spacing 35.5 (1.398) 33.5 (1.319) 3.8 (0.150) 7.2 (0.283) 6.6 (0.260) 0.5 (0.020) 0.3 (0.012) 3.1 (0.122) 2.6 (0.102) Cathode Photosensitive area Surface not flat GEOY6422 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2000-01-01 5