0,3 Schnitt A-A / A 6,3 M3 oder/ or 3,1 1,5 +0,3 Nietmutter / #4-40 M3 oder/ or 0,3 12,5 5,8 6,4 threaded bolt : 7,3 0,2 4,75 A 10,8 Gewindebolzen / cross section A-A riveted nut : 3,1 #4-40 27,5 7,3 0,3 2 39,1 3,7 13,72 3,75 11,8 15 Rohrniet / 134271 Nietmutter mit Klemmteil rivet : clamping thread: 3,3 3,1 7,3 7,3 8,2 +0,2 3,1 5,8 25,1 33,3 Polzahl / No. of contacts : Zubehor / Angled solder Terminal Length : Type : Logo : Information: Class : 207=0.8m (30 in) Au CONTACT, TIN/LEAD TERMINAL ERNI Accessory : Sonderausfuhrung / Leiterplattenlochbild 134100 / - 3W3 Anforderungsstufe / Aufdruck / Refer to table on page 2 Terminal Type : Anschlulange / Bauart / Refer to table on page 2 Part No. : Anschluart / 0,2 Refer to table on page 2 Special : Refer to table on page 2 Tolerances Board hole pattern 134100 Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / +0,2 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. 15.05.2001 Date TMC-P 3W3-LP07-3 TMC-P 3W3-LP07-3 www.ERNI.com a Index Designation M:00022942.SZN 054981 TMCP I Ordering Information D-Sub Connector High Power Solder Right Angle Male Number of Pins 3W3 Accessory Termination Side: Rivet nut M3 134464 Accessory Termination Side: Rivet nut #4-40 134465 www.erni.com