ECA
www.vishay.com Vishay Roederstein
Revision: 15-Jul-16 1Document Number: 25018
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Capacitors
FEATURES
Load life: 2000 h at 85 °C
Miniature dimension
High CU-product
SMD style
Polarized aluminum electrolytic capacitors
Reflow soldering
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
General use
Consumer electronics
Low-headroom, height restricted low mass units
Filtering, smoothing, coupling
PACKAGING
Supplied in blister tape.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case size
(Ø D x L in mm) 4 x 5.3 to 12.5 x 13.5
Rated capacitance range, CR0.10 μF to 2200 μF
Capacitance tolerance ± 20 %
Rated voltage range 6.3 V to 100 V
Category temperature range -40 °C to +85 °C
Load life 2000 h
Based on sectional
specification IEC 60384-4 / EN 130300
Climatic category
IEC 60068 40 / 105 / 56
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
RATED VOLTAGE (V)
6.3101625355063100
0.10 4 x 5.3 - -
0.22 4 x 5.3 - -
0.33 4 x 5.3 - -
0.47 4 x 5.3 - -
1.0 4 x 5.3 - -
2.2 4 x 5.3 5 x 5.3
3.3 4 x 5.3 6.3 x 5.8
4.7 5 x 5.3 6.3 x 5.8
10 4 x 5.3 5 x 5.3 6.3 x 5.8 8 x 10
22 5 x 5.3 6.3 x 5.3 8 x 6.2 8 x 10
33 5 x 5.3 6.3 x 5.3 6.3 x 7.7 8 x 10 10 x 10
47 5 x 5.3 6.3 x 5.3 8 x 6.2 8 x 10 10 x 10
68 12.5 x 13.5
100 5 x 5.3 6.3 x 5.3 8 x 6.2 8 x 10 10 x 10 12.5 x 13.5
220 8 x 6.2 6.3 x 7.7 8 x 10 10 x 10 12.5 x 13.5 -
330 6.3 x 7.7 8 x 10 10 x 10 12.5 x 13.5 - -
470 8 x 10 10 x 10 12.5 x 13.5 - - -
1000 8 x 10 10 x 10 12.5 x 13.5 - - - -
1500 10 x 10 12.5 x 13.5 - - - - -
2200 12.5 x 13.5 - - - - - -
ECA
www.vishay.com Vishay Roederstein
Revision: 15-Jul-16 2Document Number: 25018
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
Unless otherwise specified, all electrical values apply at
Tamb = 20 C, P = 80 kPa to 120 kPa, RH = 45 % to 75 %.
ORDERING EXAMPLE
ECA 33 μF / 25 V, ± 20 %, size 5 x 5.3 mm
Ordering code: MALSECA00BC233EARK
For Standard Packaging Quantity (SPQ) and Minimum Order
Quantity (MOQ) please refer to our price list or contact
customer service.
DIMENSIONS in millimeters
CASE SIZE
CODE D ± L ± A ± B ± C ± E ± RNP
BB 4 ± 0.5 5.3 ± 0.2 1.9 ± 0.2 4.3 ± 0.2 4.3 ± 0.2 1.0 ± 0.2 0.5 ~ 0.8 0.3 0.5
BC 5 ± 0.5 5.3 ± 0.2 2.3 ± 0.2 5.3 ± 0.2 5.3 ± 0.2 1.4 ± 0.2 0.5 ~ 0.8 0.3 0.5
BD 6.3 ± 0.5 5.3 ± 0.3 2.4 ± 0.2 6.6 ± 0.2 6.6 ± 0.2 2.2 ± 0.2 0.5 ~ 0.8 0.3 0.5
AD 6.3 ± 0.5 5.8 ± 0.3 2.4 ± 0.2 6.6 ± 0.2 6.6 ± 0.2 2.2 ± 0.2 0.5 ~ 0.8 0.3 0.5
BM 6.3 ± 0.5 7.7 ± 0.4 2.4 ± 0.2 6.6 ± 0.2 6.6 ± 0.2 2.2 ± 0.2 0.5 ~ 0.8 0.3 0.5
AE 8 ± 0.5 6.2 ± 0.4 3.3 ± 0.2 8.3 ± 0.2 8.3 ± 0.2 2.3 ± 0.2 0.5 ~ 0.8 0.3 0.5
AF 8 ± 0.5 10 ± 0.5 2.9 ± 0.2 8.3 ± 0.2 8.3 ± 0.2 3.1 ± 0.2 0.8 ~ 1.1 0.3 0.5
AG 10 ± 0.5 10 ± 0.5 3.2 ± 0.2 10.3 ± 0.2 10.3 ± 0.2 4.5 ± 0.2 0.8 ~ 1.1 0.3 0.5
AH 12.5 ± 0.5 13.5 ± 0.5 4.6 ± 0.2 12.8 ± 0.2 12.8 ± 0.2 4.5 ± 0.2 1.1 ~ 1.4 0.3 0.5
AK 16 ± 0.5 16.5 ± 0.5 5.6 ± 0.2 16.8 ± 0.2 16.8 ± 0.2 6.5 ± 0.2 1.1 ~ 1.4 0.3 0.5
Ø D ± α
B ± α
A ± α
A ± α
C ± α
Capacitance
Lot no. Voltage
Plastic plateform
L ± α
E ± α
N max. P max.
R
Positive
Negative
-
+
-
+
22 A
50
ELECTRICAL DATA
SYMBOL DESCRIPTION
URRated voltage
CRRated capacitance at 120 Hz
tan Max. dissipation factor at 120 Hz
RESR Max. equivalent series resistance at 120 Hz
IRRated alternating current at 120 Hz and upper
category temperature
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
120 Hz
(μF)
DIMENSIONS
D x L
(mm)
tan
120 Hz
RESR
120 Hz
()
IR
120 Hz / 85 °C
(mA)
WEIGHT
(g) CATALOG NUMBER
6.3
100 5 x 5.3 0.28 3.71 60 0.17 MALSECA00BC310BARK
330 6.3 x 7.7 0.35 1.41 188 0.40 MALSECA00BM333BARK
1000 8 x 10 0.35 0.46 370 1.00 MALSECA00AF410BARK
1500 10 x 10 0.35 0.31 480 1.25 MALSECA00AG415BARK
10
220 8 x 6.2 0.24 1.45 175 0.55 MALSECA00AE322CARK
470 8 x 10 0.24 0.68 290 1.00 MALSECA00AF347CARK
1000 10 x 10 0.24 0.32 454 1.25 MALSECA00AG410CARK
2200 12.5 x 13.5 0.24 0.14 960 2.50 MALSECA00AH422CARK
ECA
www.vishay.com Vishay Roederstein
Revision: 15-Jul-16 3Document Number: 25018
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
16
47 5 x 5.3 0.20 5.64 52 0.17 MALSECA00BC247DARK
100 6.3 x 5.3 0.20 2.65 88 0.27 MALSECA00BD310DARK
220 6.3 x 7.7 0.24 1.45 162 0.40 MALSECA00BM322DARK
330 8 x 10 0.24 0.96 270 1.00 MALSECA00AF333DARK
1500 12.5 x 13.5 0.24 0.21 870 2.50 MALSECA00AH415DARK
25
22 5 x 5.3 0.13 7.84 41 0.17 MALSECA00BC222EARK
33 5 x 5.3 0.13 5.22 50 0.17 MALSECA00BC233EARK
47 6.3 x 5.3 0.13 3.67 70 0.27 MALSECA00BD247EARK
100 8 x 6.2 0.16 2.12 145 0.55 MALSECA00AE310EARK
220 8 x 10 0.16 0.96 232 1.00 MALSECA00AF322EARK
470 10 x 10 0.16 0.45 400 1.25 MALSECA00AG347EARK
1000 12.5 x 13.5 0.16 0.21 820 2.50 MALSECA00AH410EARK
35
10 4 x 5.3 0.15 19.9 27 0.12 MALSECA00BB210FARK
33 6.3 x 5.3 0.15 6.03 65 0.27 MALSECA00BD233FARK
47 8 x 6.2 0.15 4.23 105 0.55 MALSECA00AE247FARK
100 8 x 10 0.15 1.99 175 1.00 MALSECA00AF310FARK
330 10 x 10 0.15 0.60 360 1.25 MALSECA00AG333FARK
470 12.5 x 13.5 0.15 0.42 600 2.50 MALSECA00AH347FARK
50
0.10 4 x 5.3 0.10 1326 3.2 0.12 MALSECA00BB010HARK
0.22 4 x 5.3 0.10 602.9 4.7 0.12 MALSECA00BB022HARK
0.33 4 x 5.3 0.10 401.9 5.7 0.12 MALSECA00BB033HARK
0.47 4 x 5.3 0.10 282.2 6.8 0.12 MALSECA00BB047HARK
1.0 4 x 5.3 0.10 132.6 10 0.12 MALSECA00BB110HARK
2.2 4 x 5.3 0.10 60.3 15 0.12 MALSECA00BB122HARK
3.3 4 x 5.3 0.10 40.2 18 0.12 MALSECA00BB133HARK
4.7 5 x 5.3 0.10 28.2 25 0.17 MALSECA00BC147HARK
10 5 x 5.3 0.10 13.2 41 0.17 MALSECA00BC210HARK
22 6.3 x 5.3 0.10 6.03 71 0.27 MALSECA00BD222HARK
33 6.3 x 7.7 0.12 4.82 94 0.40 MALSECA00BM233HARK
47 8 x 10 0.12 3.39 140 1.00 MALSECA00AF247HARK
100 10 x 10 0.12 1.59 195 1.25 MALSECA00AG310HARK
220 10 x 10 0.12 0.72 320 1.25 MALSECA00AG322HARK
330 12.5 x 13.5 0.12 0.48 600 2.50 MALSECA00AH333HARK
63
10 6.3 x 5.8 0.12 15.9 46 0.30 MALSECA00AD210JARK
22 8 x 6.2 0.12 7.23 96 0.55 MALSECA00AE222JARK
33 8 x 10 0.12 4.82 117 1.00 MALSECA00AF233JARK
220 12.5 x 13.5 0.12 0.72 550 2.50 MALSECA00AH322JARK
100
2.2 5 x 5.3 0.12 72.35 20 0.17 MALSECA00BC122LARK
3.3 6.3 x 5.8 0.12 48.2 29 0.30 MALSECA00AD133LARK
4.7 6.3 x 5.8 0.12 33.9 35 0.30 MALSECA00AD147LARK
10 8 x 10 0.12 15.9 77 1.00 MALSECA00AF210LARK
22 8 x 10 0.12 7.23 100 1.00 MALSECA00AF222LARK
33 10 x 10 0.12 4.82 130 1.25 MALSECA00AG233LARK
47 10 x 10 0.12 3.39 155 1.25 MALSECA00AG247LARK
68 12.5 x 13.5 0.12 2.34 350 2.50 MALSECA00AH268LARK
100 12.5 x 13.5 0.12 1.59 420 2.50 MALSECA00AH310LARK
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
120 Hz
(μF)
DIMENSIONS
D x L
(mm)
tan
120 Hz
RESR
120 Hz
()
IR
120 Hz / 85 °C
(mA)
WEIGHT
(g) CATALOG NUMBER
ECA
www.vishay.com Vishay Roederstein
Revision: 15-Jul-16 4Document Number: 25018
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
REFLOW SOLDERING CONDITIONS FOR SMD ALUMINUM ELECTROLYTIC CAPACITORS
PROFILE FEATURE
SOLDERING CONDITION
Ø 4 TO Ø 10 Ø 12.5 Ø 16
Average ramp-up rate (TL to TP) 3 °C/s max. 3 °C/s max.
Preheat
Temperature min. (Ts min.) 150 °C 150 °C
Temperature max. (Ts max.) 200 °C 200 °C
Time (Ts min. to Ts max.) 60 s to 150 s 40 s to 120 s 40 s to 100 s
Ts max. to TL
Ramp-up rate 3 °C/s max. 3 °C/s max.
Time maintained above
Temperature (TL) 217 °C 217 °C
Time (tL) 60 s to 90 s 40 s to 60 s
Peak / classification temperature (TP) 250 °C 240 °C 230 °C
Time within 5 °C of actual peak temperature (TP) 10 s max. 10 s max.
Ramp-down rate 3 °C/s max. 3 °C/s max.
Time 25 °C to peak temperature 8 min max. 8 min max.
RESISTANCE TO SOLDERING HEAT
Leakage current Less than specified value
Capacitance value Within ± 10 % of initial value
tan Less than specified value
LOW TEMPERATURE BEHAVIOR (at 120 Hz)
IMPEDANCE RATIO
(Z) T2/(Z) T1 RATED VOLTAGE (V)
T2/T1 6.3101625355063100
-25 °C / +20 °C54322222
-40 °C / +20 °C 10 8 6 4 3 3 3 3
Ramp-up
Ramp-down
Ts min.
Ts max.
ts
Preheat
tP
tL
TPCritical Zone
TL to TP
t 25 °C to Peak
Time
Temperature
TL
ECA
www.vishay.com Vishay Roederstein
Revision: 15-Jul-16 5Document Number: 25018
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS VALUE
Current
Leakage current
(Test conditions: UR, 20 °C) After 2 min at URIL2 0.01 x CR x URor 3 μA for UR 100 V (whichever is greater)
Resistance
Equivalent series resistance
(ESR) Calculated from tan max. ESR = tan /2 f CR
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz) IR MULTIPLIER FOR UR 100 V
50 0.70
120 1.00
300 1.17
1000 1.36
10 000 1.50
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
Load life
Tamb = 85 °C
UR and IR applied
After 2000 h
C/C: ± 20 % of initial value
IL spec. limit
tan 2 x spec. limit
Shelf life
No voltage applied
After 1000 h
After test: UR to be applied for 30 min
24 to 48 h before measurement
C/C: ± 20 % of initial value
IL spec. limit
tan 2 x spec. limit
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED