1997 Nov 24 1
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
FEATURES
•Polarized aluminium electrolytic
capacitors, non-solid
•Axial leads, cylindrical aluminium
case, insulated with a blue sleeve
•Mounting ring version (single
ended) not insulated
•Case∅10 ×30 to 21 ×40 mm with
pressure relief
•Taped versions up to∅15 ×30 mm
available for automatic insertion
•Charge and discharge proof
•Long useful life: 10000 to 15000
hours at 85 °C, high reliability
•High ripple current capability.
Fig.1 Component outlines.
handbook, 4 columns
MBB121
handbook, 2 columns
ALL-DIN 132 (LV)
MLC983
longer
life
ASH 042/043
AML 138
105 oC
AHT-DIN 119
125 oC
high
voltage
smaller
dimensions
ALL-DIN 133
(HV)
APPLICATIONS
•General industrial, power supplies,
telecommunication, EDP
•Coupling, decoupling, timing;
smoothing, filtering and buffering in
SMPS •For use where low mounting height
is important •Vibration and shock resistant.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Case sizes (∅Dnom ×Lnom in mm) 6.5 ×18 and 8 ×18 10 ×18 and 10 ×25 10 ×30 to 21 ×40
Rated capacitance range, CR1 to 4700 µF
Tolerance on CR−10 to +50%
Rated voltage range, UR10 to 350 V
Category temperature range −40 to +85 °C
Endurance test at 105 °C 2000 hours 2000 hours −
Endurance test at 85 °C 6000 hours 8000 hours 8000 hours
Useful life at 105 °C 3000 hours 3000 hours −
Useful life at 85 °C 10000 hours 15000 hours 15000 hours
Useful life at 40 °C, 1.8 ×IR applied 160000 hours 240000 hours 240000 hours
Shelf life at 0 V, 85 °C 500 hours
Based on sectional specification IEC 384-4/CECC 30300
Detail specification DIN 45910-T 123, former DIN 41257,
UTE C031/C033 (without approval)
Climatic category IEC 68 40/085/56
1997 Nov 24 2
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
Selection chart for CR, UR and relevant nominal case sizes (∅Dnom ×Lnom in mm)
Preferred types in bold.
Note
1. For these CV-values see
“ASH 041-043 series
”.
CR
(µF) UR (V)
10 16 25 40 63 100 160 250 350
1.0 −−−−−6.5 ×18 −−6.5 ×18
2.2 −−−−−6.5 ×18 6.5 ×18 8×18 8 ×18
4.7 −−−−6.5 ×18 6.5 ×18 8×18 10 ×18 10 ×18
10 −−−−6.5 ×18 8 ×18 10 ×18 10 ×25 12.5 ×30(1)
−−−−−−−10 ×30(1) −
22 −−6.5 ×18 −8×18 10 ×18 10 ×25 12.5 ×30(1) 15 ×30(1)
−−−−−−10 ×30(1) −−
47 −6.5 ×18 −8×18 10 ×18 10 ×25 15 ×30(1) 18 ×30(1) 18 ×40(1)
−−−− 10 ×30 −− −
68 −−−−10 ×30 12.5 ×30 15 ×30(1) 18 ×40(1) 21 ×40(1)
100 −8×18 −10 ×18 10 ×30 15 ×30 18 ×30(1) 21 ×40(1) −
150 −−−12.5 ×30 15 ×30 18 ×30 18 ×40(1) −−
220 8×18 10 ×18 10 ×25 12.5 ×30 15 ×30 18 ×40 21 ×40(1) −−
−−12.5 ×30 −−−− − −
330 −10 ×25 12.5 ×30 15 ×30 18 ×30 18 ×40 −− −
−12.5 ×30 −−−−− − −
470 12.5 ×30 10 ×25 12.5 ×30 15 ×30 18 ×40 21 ×40 −− −
−12.5 ×30 −−−−− − −
680 12.5 ×30 15 ×30 18 ×30 18 ×30 21 ×40 −− − −
1000 15 ×30 15 ×30 18 ×30 18 ×40 21 ×40 −− − −
1500 18 ×30 18 ×30 18 ×40 21 ×40 −−− − −
2200 18 ×30 18 ×40 21 ×40 21 ×40 −−− − −
3300 18 ×40 21 ×40 −−−−− − −
4700 21 ×40 21 ×40 −−−−− − −
1997 Nov 24 3
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
MECHANICAL DATA, AVAILABLE FORMS AND PACKAGING QUANTITIES
handbook, halfpage
MBC193 - 1
73 1.6
LD d
OO
F
+
Dimensions in mm.
Form BR: Taped on reel,
case ∅D×L = 6.5 ×18 to 15 ×30 mm.
Form BA: Taped in box (ammopack),
case ∅D×L = 6.5 ×18 to 10 ×25 mm.
For dimensions see Table 1.
Tape dimensions are specified in this handbook, section
“Packaging”
.
Fig.2 Dimensional outline; Forms BA and BR.
handbook, full pagewidth
MBC060
O D
33 1Ll
O d
F
Dimensions in mm.
Form AA: Axial in box,
case ∅D×L=10×30 to 21 ×40 mm
For case sizes 18 ×40 mm and 21 ×40 mm, the stated L may be exceeded by 0.7 mm.
For dimensions see Table 1.
Fig.3 Dimensional outline; Form AA.
1997 Nov 24 4
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
Table 1 Axial; physical dimensions, mass and packaging quantities; see Figs 2 and 3
Table 2 Single ended; physical dimensions, mass and packaging quantities; see Fig.4
NOMINAL
CASE SIZE
∅D×L
CASE
CODE
AXIAL: FORM AA, BA, and BR MASS
(g)
PACKAGING QUANTITIES
∅d
(mm) l
(mm) ∅Dmax
(mm) Lmax
(mm) Fmin
(mm) FORM
AA FORM
BA FORM
BR
6.5 ×18 4 0.8 −6.9 18.5 25 ≈1.3 −1000 1000
8×18 5 0.8 −8.5 18.5 25 ≈1.7 −500 500
10 ×18 6 0.8 −10.5 18.5 25 ≈2.5 −500 500
10 ×25 7 0.8 −10.5 25.0 30 ≈3.3 −500 500
10 ×30 00 0.8 55 ±1 10.5 30.5 35 ≈4.8 200 −500
12.5 ×30 01 0.8 55 ±1 13.0 30.5 35 ≈7.4 200 −400
15 ×30 02 0.8 55 ±1 15.5 30.5 35 ≈11.7 200 −250
18 ×30 03 0.8 55 ±1 18.5 30.5 35 ≈12.9 200 −−
18 ×40 04 0.8 34 ±1 18.5 41.5 45 ≈19.4 100 −−
21 ×40 05 0.8 34 ±1 21.5 41.5 45 ≈24.7 100 −−
NOMINAL
CASE SIZE
∅D×L
CASE
CODE
SINGLE ENDED WITH MOUNTING RING: FORM MR MASS
(g) PACKAGING
QUANTITIES
∅D1
(mm) ∅D2
(mm) ∅Dmax
(mm) ∅D2max
(mm) D3
(mm) Lmax
(mm)
15 ×30 02 0.8 1.0 +0.4 15.5 17.5 16.5 ±0.2 33 ≈11.7 200
18 ×30 03 0.8 1.0 +0.4 18.5 19.5 18.5 ±0.2 33 ≈12.9 200
18 ×40 04 0.8 1.0 +0.4 18.5 19.5 18.5 ±0.2 45 ≈19.4 100
21 ×40 05 0.8 1.0 +0.4 21.5 22.5 21.5 ±0.2 45 ≈24.7 100
handbook, full pagewidth
D3
d2
120o
(3x)
1.3 0.1
0(3x)
MAM055
O D
L
O D2 Od1
0.2
0.4
3.6
1.0
0.5
1
90o2o
(3x)
1.05 0.03
0.1 (3x)
0
0.05 (3x)
1.3
piercing diagram
Dimensions in mm.
Form MR: case ∅D×L=15×30 to 21 ×40 mm
Case not insulated (insulation on request).
Especially for applications with severe shocks and vibrations.
For dimensions see Table 2
Fig.4 Piercing diagram and outline; Form MR; single ended with mounting ring and pins.
1997 Nov 24 5
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
ELECTRICAL DATA
Unless otherwise specified, all electrical values in Tables 3, 5, 7 and 9 apply at Tamb =20°C, P = 86 to 106 kPa,
RH = 45 to 75%.
Table 3 Electrical data; preferred types in bold
SYMBOL DESCRIPTION
CRrated capacitance at 100 Hz (tolerance −10 to +50%)
IRrated RMS ripple current at 100 Hz, 85 °C
IL1 max. leakage current after 1 minute at UR
IL5 max. leakage current after 5 minutes at UR
Tan δmax. dissipation factor at 100 Hz
ESR equivalent series resistance at 100 Hz (calculated from tan δmax and CR)
Z max. impedance at 10 kHz or 100 kHz
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
IR
100 Hz
85 °C
(mA)
IL1
1 min
(µA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
10 kHz
(Ω)
Z
100 kHz
(Ω)
10 220 8 ×18 190 25 8.4 0.18 1.3 0.73 0.70
470 12.5 ×30 350 32 9.4 0.18 0.61 0.26 0.60
680 12.5 ×30 460 45 13.6 0.18 0.42 0.20 0.40
1000 15 ×30 640 64 20 0.18 0.28 0.12 −
1500 18 ×30 800 94 30 0.22 0.23 0.10 −
2200 18 ×30 1100 140 44 0.22 0.16 0.09 −
3300 18 ×40 1300 200 66 0.27 0.13 0.05 −
4700 21 ×40 1800 290 94 0.27 0.09 0.05 −
16 47 6.5 ×18 95 11 5.5 0.14 4.7 2.6 2.2
100 8 ×18 150 19 7.2 0.14 2.2 1.2 1.1
220 10 ×18 250 38 11 0.14 1.0 0.55 0.55
330 10 ×25 320 56 14.6 0.14 0.67 0.36 0.36
330 12.5 ×30 320 36 10.6 0.14 0.67 0.36 0.60
470 10 ×25 450 78 19 0.14 0.47 0.26 0.26
470 12.5 ×30 450 49 15 0.14 0.47 0.26 0.40
680 15 ×30 550 69 22 0.14 0.33 0.14 −
1000 15 ×30 780 100 32 0.14 0.22 0.12 −
1500 18 ×30 950 150 48 0.15 0.16 0.10 −
2200 15 ×40 1300 220 70 0.15 0.11 0.06 −
3300 21 ×40 1600 320 110 0.15 0.07 0.05 −
4700 21 ×40 2300 460 150 0.15 0.05 0.05 −
1997 Nov 24 6
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
ORDERING INFORMATION
Ordering example
Electrolytic capacitor ALL-DIN 132
100 µF/40 V; −10/+50%
Nominal case size: ∅10 ×18; Form BR
Catalogue number: 2222 132 27101.
Table 4 Ordering information; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE
CATALOGUE NUMBER 2222 . . . .....
AXIAL SINGLE ENDED
IN BOX
FORM AA
TAPED
ON REEL
FORM BR
TAPED
IN BOX
FORM BA
MOUNTING RING
FORM MR
10 220 8 ×18 5 −132 24221 132 34221 −
470 12.5 ×30 01 132 14471 132 24471 −−
680 12.5 ×30 01 132 14681 132 24681 −−
1000 15 ×30 02 132 14102 132 24102 −132 44102
1500 18 ×30 03 132 14152 −−132 44152
2200 18 ×30 03 132 14222 −−132 44222
3300 18 ×40 04 132 14332 −−132 44332
4700 21 ×40 05 132 14472 −−132 44472
16 47 6.5 ×18 4 −132 25479 132 35479 −
100 8 ×18 5 −132 25101 132 35101 −
220 10 ×18 6 −132 25221 132 35221 −
330 10 ×25 7 −132 90508 132 90509 −
330 12.5 ×30 01 132 15331 132 25331 −−
470 10 ×25 7 −132 90507 132 90502 −
470 12.5 ×30 01 132 15471 132 25471 −−
680 15 ×30 02 132 15681 132 25681 −132 45681
1000 15 ×30 02 132 15102 132 25102 −132 45102
1500 18 ×30 03 132 15152 −−132 45152
2200 15 ×40 04 132 15222 −−132 45222
3300 21 ×40 05 132 15332 −−132 45332
4700 21 ×40 05 132 15472 −−132 45472
1997 Nov 24 7
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
ELECTRICAL DATA (continued)
Table 5 Electrical data continued; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
IR
100 Hz
85 °C
(mA)
IL1
1 min
(µA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
10 kHz
(Ω)
Z
100 kHz
(Ω)
25 22 6.5 ×18 60 8.5 5.1 0.11 8.0 4.1 2.9
220 10 ×25 340 58 15 0.11 0.8 0.40 0.40
220 12.5 ×30 340 37 11 0.11 0.8 0.40 0.60
330 12.5 ×30 410 54 16.5 0.11 0.53 0.30 0.40
470 12.5 ×30 560 75 24 0.11 0.37 0.20 −
680 18 ×30 700 106 34 0.11 0.26 0.10 −
1000 18 ×30 1000 150 50 0.11 0.17 0.10 −
1500 18 ×40 1100 230 75 0.12 0.13 0.06 −
2200 21 ×40 1850 330 110 0.13 0.09 0.05 −
40 47 8 ×18 120 22 7.8 0.09 3.0 1.6 1.4
100 10 ×18 210 43 12 0.09 1.4 0.75 0.75
150 10 ×25 310 63 16 0.09 0.95 0.50 0.50
150 12.5 ×30 310 40 12 0.09 0.95 0.50 0.60
220 12.5 ×30 410 57 17.5 0.09 0.65 0.34 0.40
330 15 ×30 550 83 26 0.09 0.43 0.20 −
470 15 ×30 700 120 38 0.09 0.30 0.16 −
680 18 ×30 900 170 54 0.09 0.21 0.10 −
1000 18 ×40 1200 240 80 0.09 0.14 0.08 −
1500 21 ×40 1500 360 120 0.10 0.10 0.06 −
2200 21 ×40 1900 530 180 0.10 0.07 0.05 −
1997 Nov 24 8
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
ORDERING INFORMATION (continued)
Table 6 Ordering information continued; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE
CATALOGUE NUMBER 2222 . . . .....
AXIAL SINGLE ENDED
IN BOX
FORM AA
TAPED
ON REEL
FORM BR
TAPED
IN BOX
FORM BA
MOUNTING RING
FORM MR
25 22 6.5 ×18 4 −132 26229 132 36229 −
220 10 ×25 7 −132 90503 132 90504 −
220 12.5 ×30 01 132 16221 132 26221 −−
330 12.5 ×30 01 132 16331 132 26331 −−
470 12.5 ×30 01 132 16471 132 26471 −−
680 18 ×30 03 132 16681 −−132 46681
1000 18 ×30 03 132 16102 −−132 46102
1500 18 ×40 04 132 16152 −−132 46152
2200 21 ×40 05 132 16222 −−132 46222
40 47 8 ×18 5 −132 27479 132 37479 −
100 10 ×18 6 −132 27101 132 37101 −
150 10 ×25 7 −132 90511 132 90512 −
150 12.5 ×30 01 132 17151 132 27151 −−
220 12.5 ×30 01 132 17221 132 27221 −−
330 15 ×30 02 132 17331 132 27331 −132 47331
470 15 ×30 02 132 17471 132 27471 −132 47471
680 18 ×30 03 132 17681 −−132 47681
1000 18 ×40 04 132 17102 −−132 47102
1500 21 ×40 05 132 17152 −−132 47152
2200 21 ×40 05 132 17222 −−132 47222
1997 Nov 24 9
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
ELECTRICAL DATA (continued)
Table 7 Electrical data continued; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
IR
100 Hz
85 °C
(mA)
IL1
1 min
(µA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
10 kHz
(Ω)
Z
100 kHz
(Ω)
63 4.7 6.5 ×18 38 6.0 4.6 0.07 24 12 5
10 6.5 ×18 64 9.3 5.3 0.07 11 5.5 3.3
22 8 ×18 100 17 6.8 0.07 5.1 2.5 2.1
47 10 ×18 170 33 9.9 0.07 2.4 1.2 1.2
68 10 ×25 210 46 12.6 0.07 1.6 0.81 0.60
68 10 ×30 210 30 8.6 0.07 1.6 0.80 0.60
100 10 ×30 300 42 12.6 0.07 1.1 0.60 0.40
150 15 ×30 350 61 19 0.07 0.74 0.37 −
220 15 ×30 520 87 28 0.07 0.50 0.25 −
330 18 ×30 600 130 42 0.07 0.34 0.15 −
470 18 ×40 970 180 59 0.07 0.24 0.12 −
680 21 ×40 1000 260 86 0.07 0.16 0.08 −
1000 21 ×40 1600 380 130 0.07 0.11 0.06 −
100 1 6.5 ×18 20 4.0 4.0 0.06 95 45 6
2.2 6.5 ×18 30 5.2 4.4 0.06 43 20 5
4.7 6.5 ×18 48 7.7 4.9 0.06 20 9.6 4
10 8 ×18 73 13 6 0.06 9.5 4.5 2.8
22 10 ×18 130 25 8.4 0.06 4.3 2 1.3
47 10 ×25 220 50 13.4 0.06 2.0 1 0.90
47 10 ×30 220 32 9.4 0.06 2.0 1 0.90
68 12.5 ×30 250 45 13.5 0.06 1.4 0.80 −
100 15 ×30 380 64 20 0.06 0.95 0.50 −
150 18 ×30 400 94 30 0.06 0.64 0.35 −
220 18 ×40 660 140 44 0.06 0.43 0.20 −
330 18 ×40 700 200 66 0.06 0.29 0.15 −
470 21 ×40 1200 290 94 0.06 0.20 0.10 −
1997 Nov 24 10
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
ORDERING INFORMATION (continued)
Table 8 Ordering information continued; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE
CATALOGUE NUMBER 2222 . . . .....
AXIAL SINGLE ENDED
IN BOX
FORM AA
TAPED
ON REEL
FORM BR
TAPED
IN BOX
FORM BA
MOUNTING RING
FORM MR
63 4.7 6.5 ×18 4 −132 28478 132 38478 −
10 6.5 ×18 4 −132 28109 132 38109 −
22 8 ×18 5 −132 28229 132 38229 −
47 10 ×18 6 −132 28479 132 38479 −
68 10 ×25 7 −132 90513 132 90514 −
68 10 ×30 00 132 18689 132 28689 −−
100 10 ×30 00 132 18101 132 28101 −−
150 15 ×30 02 132 18151 132 28151 −132 48151
220 15 ×30 02 132 18221 132 28221 −132 48221
330 18 ×30 03 132 18331 −−132 48331
470 18 ×40 04 132 18471 −−132 48471
680 21 ×40 05 132 18681 −−132 48681
1000 21 ×40 05 132 18102 −−132 48102
100 1 6.5 ×18 4 −132 29108 132 39108 −
2.2 6.5 ×18 4 −132 29228 132 39228 −
4.7 6.5 ×18 4 −132 29478 132 39478 −
10 8 ×18 5 −132 29109 132 39109 −
22 10 ×18 6 −132 29229 132 39229 −
47 10 ×25 7 −132 90505 132 90506 −
47 10 ×30 00 132 19479 132 29479 −−
68 12.5 ×30 01 132 19689 132 29689 −−
100 15 ×30 02 132 19101 132 29101 −132 49101
150 18 ×30 03 132 19151 −−132 49151
220 18 ×4004 132 19221 −−132 49221
330 18 ×40 04 132 19331 −−132 49331
470 21 ×40 05 132 19471 −−132 49471
1997 Nov 24 11
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
ELECTRICAL DATA (continued)
Table 9 Electrical data continued; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
IR
100 Hz
85 °C
(mA)
IL1
1 min
(µA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
10 kHz
(Ω)
Z
100 kHz
(Ω)
160 2.2 6.5 ×18 22 50 20 0.10 72 55 30
4.7 8 ×18 37 50 20 0.10 34 26 20
10 10 ×18 61 50 20 0.10 16 12 10
22 10 ×25 120 50 20 0.10 7.2 5.5 2.5
250 2.2 8 ×18 25 50 20 0.10 72 50 30
4.7 10 ×18 37 50 20 0.10 34 23 16
10 10 ×25 66 50 20 0.10 16 11 9
350 1 6.5 ×18 15 50 20 0.10 160 100 40
2.2 8 ×18 25 50 20 0.10 72 45 28
4.7 10 ×18 43 50 20 0.10 34 21 15
1997 Nov 24 12
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
ORDERING INFORMATION (continued)
Table 10 Ordering information continued; preferred types in bold
MARKING
The capacitors are marked (where possible) with the following information:
•Rated capacitance (in µF)
•Tolerance on rated capacitance, code letter in accordance with
“IEC 62”
•Rated voltage (in V)
•Upper category temperature (85 °C)
•Group number (132 or 133)
•Name of manufacturer (PHILIPS)
•Date code, in accordance with
“IEC 62”
•Code indicating factory of origin
•Band to identify the negative terminal.
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE
CATALOGUE NUMBER 2222 . . . .....
AXIAL SINGLE ENDED
IN BOX
FORM AA
TAPED
ON REEL
FORM BR
TAPED
IN BOX
FORM BA
MOUNTING RING
FORM MR
160 2.2 6.5 ×18 4 −133 21228 133 31228 −
4.7 8 ×18 5 −133 21478 133 31478 −
10 10 ×18 6 −133 21109 133 31109 −
22 10 ×25 7 −133 90502 133 90503 −
250 2.2 8 ×18 5 −133 23228 133 33228 −
4.7 10 ×18 6 −133 23478 133 33478 −
10 10 ×25 7 −133 23109 133 33109 −
350 1 6.5 ×18 4 −133 25108 133 35108 −
2.2 8 ×18 5 −133 25228 133 35228 −
4.7 10 ×18 6 −133 25478 133 35478 −
1997 Nov 24 13
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
ELECTRICAL DATA (continued)
Additional electrical data
PARAMETER CONDITIONS VALUE
AXIAL SINGLE ENDED
Voltage
Surge voltage for short
periods UR=10to250V U
s≤1.15 ×UR
UR= 350 V Us≤1.1 ×UR
Reverse voltage Urev ≤1V
Current
Leakage current after 1 minute:
case ∅D×L = 6.5 ×18 to 10 ×25 mm
UR=10to100V I
L1 ≤0.01CR×UR+3µA
U
R= 160 to 350 V IL1 ≤50 µA
case ∅D×L=10×30 to 21 ×40 mm
UR=10to100V I
L1 ≤0.006CR×UR+µA
after 5 minutes:
case ∅D×L = 6.5 ×18 to 10 ×25 mm
UR= 10 to 100 V IL5 ≤0.002CR×UR+4µA
U
R= 160 to 350 V IL5 ≤20 µA
case ∅D×L=10×30 to 21 ×40 mm
UR=10to100V I
L5 ≤0.002CR×URµA
Inductance
Equivalent series
inductance (ESL) case ∅D×L mm:
6.5 ×18 typ. 15 nH −
8×18 typ. 35 nH −
10 ×18 typ. 69 nH −
10 ×25 typ. 38 nH −
10 ×30 typ. 38 nH −
12.5 ×30 typ. 46 nH −
15 ×30 typ. 48 nH typ. 39 nH
18 ×30 typ. 50 nH typ. 39 nH
18 ×40 typ. 54 nH typ. 39 nH
21 ×40 typ. 59 nH typ. 39 nH
1997 Nov 24 14
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
Capacitance (C)
Fig.5 Typical multiplier of capacitance as a function of ambient temperature
Curve 1: 10 V.
Curve 2: 63 V.
Curve 3: ≥100 V.
C0= capacitance at 20 °C, 100 Hz.
handbook, 4 columns
40 40
1.10
1.05
0.85
0.95
MGB234
0Tamb ( C)
o
C
C0
80
1.00
0.90
2
3
1
2
3
1
Fig.6 Typical multiplier of capacitance as a function of frequency.
Curve 1: 10 V.
Curve 2: 63 V.
Curve 3: ≥100 V.
C0= capacitance at 20 °C, 100 Hz.
handbook, 4 columns
1.05
0.85
0.95
MGB235
1.00
0.90
0.80
0.7510 10
2
10
3
10
4
f (Hz)
C
C0
2
3
1
1997 Nov 24 15
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
Dissipation factor (tan δ)
Fig.7 Typical tan δ as a function of ambient temperature.
handbook, 4 columns
MGB236
02040 20 40 60 80 100
Tamb ( C)
o
60
1
10
10
tan δ
1
10 2
2
1
Curve 1: 16 V.
Curve 2: 100 V.
Case ∅D×L = 6.5 ×18 to 10 ×25 mm.
f = 100 Hz.
Fig.8 Typical tan δ as a function of frequency.
Curve 1: 16 V.
Curve 2: 100 V.
Case ∅D×L = 6.5 ×18 to 10 ×25 mm.
Tamb =20°C.
handbook, 4 columns
MGB237
10
1
10 102103104
f (Hz)
tan δ
10 1
10 2
2
1
1997 Nov 24 16
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
Impedance (Z)
Fig.9 Typical impedance as a function of ambient temperature.
Curve 1: 4.7 µF, 100 V.
Curve 2: 47 µF, 16 V.
Curve 3: 150 µF, 16 V.
Curve 4: 220 µF, 16 V.
Curve 5: 470 µF, 16 V.
Case ∅D×L = 6.5 ×18 to 10 ×25 mm.
f = 10 kHz.
handbook, 4 columns
MBC408
102
10
1
Z
(Ω)
0 2040608010020
4060
1
2
3
4
5
( C)Tamb o
10 1
10 2
Fig.10 Typical impedance as a function of frequency.
Curve 1: 4.7 µF, 100 V.
Curve 2: 47 µF, 16 V.
Curve 3: 150 µF, 16 V.
Curve 4: 220 µF, 16 V.
Curve 5: 470 µF, 16 V.
Case ∅D×L = 6.5 ×18 to 10 ×25 mm.
Tamb =20°C.
handbook, 4 columns
MBC407
6543 10101010
103
102
10
1
f (Hz)
Z
(Ω)
2
10
1
2
3
4
5
10 1
1997 Nov 24 17
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
RIPPLE CURRENT AND USEFUL LIFE
Table 11 Multiplier of ripple current (IR/IRO) as a function of frequency; IRO = ripple current at 85 °C, 100 Hz
FREQUENCY
(Hz) IR MULTIPLIER
UR=10to16V U
R=25to63V U
R= 100 to 350 V
50 0.95 0.9 0.85
100 1.0 1.0 1.0
300 1.07 1.12 1.2
1000 1.12 1.2 1.3
3000 1.15 1.25 1.35
≥10000 1.2 1.3 1.4
Fig.11 Multiplier of useful life as a function of ambient temperature and ripple current load.
IA= actual ripple current at 100 Hz.
IR= rated ripple current at 100 Hz, 85 °C.
(1) Useful life at 85 °C and IR applied;
case ∅D×L = 6.5 ×18 and 8 ×18 mm: 10000 hours
case ∅D×L=10×18 to 21 ×40 mm: 15000 hours.
handbook, full pagewidth
3.3
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.5
0.0
3.1
40 50 60 70 80 90 100
T ( C)
amb o
IA
R
I
MBC243
lifetime multiplier
(1)
70
50
6.0
4.0
2.0
1.5
30
15
10
3.0
20
1.0
1997 Nov 24 18
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Axial Long Life, DIN-based ALL-DIN 132-133
SPECIFIC TESTS AND REQUIREMENTS
General tests and requirements are specified in this handbook, section
“Tests and Requirements”
.
Table 12 Test procedures and requirements
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF
TEST REFERENCE
Endurance IEC 384-4/
CECC 30300,
subclause 4.13
Tamb =85°C; UR applied;
case ∅D×L = 6.5 ×18 and 8 ×18 mm:
6000 hours;
case ∅D×L=10×18 to 21 ×40 mm:
8000 hours
UR=10to160V;∆C/C: ±15%
UR= 250 to 350 V; ∆C/C: ±10%
tan δ≤1.3 ×spec. limit
Z≤2×spec. limit
IL5 ≤spec. limit
Useful life CECC 30301,
subclause 1.8.1 Tamb =85°C; UR and IR applied;
case ∅D×L = 6.5 ×18 and 8 ×18 mm:
10000 hours;
case ∅D×L=10×18 to 21 ×40 mm:
15000 hours
UR=10to160V;∆C/C: ±45%
UR= 250 to 350 V; ∆C/C: ±30%
tan δ≤ 3 ×spec. limit
Z≤3×spec. limit
IL5 ≤spec. limit
no short or open circuit
total failure percentage: ≤1%
Shelf life
(storage at high
temperature)
IEC 384-4/
CECC 30300,
subclause 4.17
Tamb =85°C; no voltage applied;
500 hours;
after test: UR to be applied for
30 minutes, 24 to 48 hours before
measurement
∆C/C, tan δ, Z: for requirements
see ‘Endurance test’ above
IL5 ≤2×spec. limit
